Fairchild HLMP-Q106A Solid state led lamps subminiature t-1 3/4 1.9mm Datasheet

SOLID STATE LED LAMPS
SUBMINIATURE T-1 3/4 (1.9mm)
AlGaAs RED
AllnGaP ORANGE
AllnGaP YELLOW
PACKAGE DIMENSIONS
0.087 (2.2)
0.079 (2.0)
EMITTER
0.276 (7.0)
MIN
0.024 (0.6)
0.016 (0.4)
ANODE
Clear
Clear
Clear
FEATURES
0.091 (2.3)
0.083 (2.1)
• Subminiature package
0.020 (0.5)
0.012 (0.3)
0.075 (1.9)
0.063 (1.6)
HLMP-Q106A
HLMA-QH00A
HLMA-QL00A
• Low profile package
• Three lead bend options for
surface mounting
0.058 (1.40)
0.050 (1.28)
• Available in tape and reel
0.056 (1.44)
0.048 (1.24)
0.010 (0.26)
0.002 (0.06)
0.031 (0.78)
0.023 (0.58)
DESCRIPTION
CATHODE MARK
(COLOR STRIPE ON SIDE OF PACKAGE)
These subminiature LED lamps are intended for high volume,
low cost status indication on PCBs, as well as for backlighting
keyboards and switches. Choices of “Yoke”, “Z-Bend” or “GullWing” lead bends are available.
NOTE:
Dimensions are in inches (mm).
ABSOLUTE MAXIMUM RATINGS
Parameter
Continuous Forward Current - IF
Peak Forward Current - IF
(f = 1.0 KHz, Duty Factor = 1/10)
Reverse Voltage - VR (IR = 10 µA)
Power Dissipation - PD
(TA = 25°C unless otherwise specified)
AlGaAs Red
AllnGaP Orange
AllnGaP Yellow
HLMP-Q106A
HLMA-QH00A
HLMA-QL00A
50
50
50
mA
200
100
100
mA
5
5
5
V
120
120
mW
100
Units
Operating Temperature - TOPR
-40 to +100
°C
Storage Temperature - TSTG
-40 to +100
°C
Wave
260 for 5 sec
°C
Reflow
260 for 10 sec
Lead Soldering Time - TSOL
ELECTRICAL / OPTICAL CHARACTERISTICS
(TA =25°C)
AlGaAs Red
AllnGaP Orange
AllnGaP Yellow
HLMP-Q106A
HLMA-QH00A
HLMA-QL00A
Minimum
50
150
150
Typical
500
500
500
Part Number
Luminous Intensity (mcd)
Condition
IF = 20mA
Forward Voltage (V)
IF = 20mA
Maximum
2.4
2.4
2.4
Typical
1.9
1.9
1.9
Peak Wavelength (nm)
660
620
590
IF = 20mA
Spectral Line Half Width (nm)
20
18
15
IF = 20mA
Viewing Angle (°)
25
25
25
IF = 20mA
1 of 4
4/4/00
300049A
SOLID STATE LED LAMPS
SUBMINIATURE T-1 3/4 (1.9mm)
AlGaAs RED
AllnGaP ORANGE
AllnGaP YELLOW
HLMP-Q106A
HLMA-QH00A
HLMA-QL00A
Clear
Clear
Clear
TYPICAL PERFORMANCE CURVES
100
2.5
RELATIVE LUMNOUS INTENSITY
(NORMALIZED AT 20 mA)
IF - FORWARD CURRENT (mA)
90
80
70
AllnGaP Yellow
AllnGaP Orange
AlGaAs Red
60
50
40
30
20
10
1.5
1.0
0.5
0.0
0
1.0
2.0
1.5
2.0
2.5
3.0
0
20
VF - FORWARD VOLTAGE (V)
NORMALIZED INTENSITY
RELATIVE INTENSITY
AlGaAs Red
0.5
0
2 of 4
50
1.0
AllnGaP Yellow
600
40
Fig. 2 Relative Luminous Intensity
vs. DC Forward Current
AllnGaP Orange
550
30
IF - DC FORWARD CURRENT (mA)
Fig. 1 Forward Current vs. Forward Voltage
1.0
20
650
700
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-50
-40
-30
-20
-10
0
10
20
30
WAVELENGTH (nm)
ANGULAR DISPLACEMENT - DEGREES
Fig. 3 Relative Intensity vs. Peak Wavelength
Fig. 4 Relative Luminous Intensity
vs. Angular Displacement
4/4/00
40
50
300049A
SOLID STATE LED LAMPS
SUBMINIATURE T-1 3/4 (1.9mm)
AlGaAs RED
AllnGaP ORANGE
AllnGaP YELLOW
Gull-Wing Lead Option
HLMP-Q106A
HLMA-QH00A
HLMA-QL00A
Clear
Clear
Clear
Yoke Lead Option
0.087 (2.21)
0.079 (2.01)
0.087 (2.21)
0.079 (2.01)
0.020 (0.50)
0.079 (2.00)
0.091 (2.31)
0.083 (2.11)
0.016 (0.4)
0.024 (0.61)
0.016 (0.41)
0.045 (1.14)
0.020 (0.51)
0.012 (0.30)
0.304 (7.72)
0.296 (7.52)
0.159 (4.05)
0.148 (3.75)
0.075 (1.90)
0.067 (1.70)
0.075 (1.91)
0.063 (1.60)
0.058 (1.48)
0.050 (1.28)
0.058 (1.48)
0.050 (1.28)
0.035 (0.90)
0.028 (0.70)
.026 [0.66]
0.027 (0.68)
0.009 (0.23)
0.016 (0.40)
0.008 (0.20)
0.040 (1.02)
0.007 (0.1)
0.001 (.03)
0.109 (2.76)
Z-Bend Lead Option
0.087 (2.21)
0.079 (2.01)
0.024 (0.61)
0.016 (0.41)
0.091 (2.31)
0.083 (2.11)
0.020 (0.51)
0.012 (0.30)
0.075 (1.90)
0.067 (1.70)
0.058 (1.48)
0.050 (1.28)
.026 [0.66]
0.027 (0.68)
NOTE
All dimensions are in inches (millimeters)
0.120 (3.04)
0.181 (4.60)
0.244 (6.20)
0.236 (6.00)
www.qtopto.com
Call QT Optoelectronics for more information or the phone number of your nearest distributor.
United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7352417
3 of 4
4/4/00
300049A
SOLID STATE LED LAMPS
SUBMINIATURE T-1 3/4 (1.9mm)
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
www.fairchildsemi.com
4 of 4
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
© 2000 Fairchild Semiconductor Corporation
4/4/00
300049A
Similar pages