FM220C RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION FM260C SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 60 Volts CURRENT 2.0 Ampere FEATURES * * * * * * Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability DO-214AB MECHANICAL DATA * * * * * * 0.125 (3.17) 0.115 (2.92) Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Metallurgically bonded construction Mounting position: Any Weight: 0.24 gram 0.245 (6.22) 0.220 (5.59) 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.008 (0.203) 0.004 (0.102) 0.320 (8.13) 0.305 (7.75) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL FM220C FM230C FM240C FM250C FM260C UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 Volts VDC 20 30 40 50 60 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Lead Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 2.0 Amps I FSM 50 Amps 0 Typical Thermal Resistance (Note 1) Rθ JA 40 Typical Junction Capacitance (Note 2) CJ 130 Operating Temperature Range TJ Storage Temperature Range -65 to + 125 T STG C/ W pF -65 to + 150 -65 to + 150 0 C 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 2.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C VF FM220C FM230C FM240C .55 IR NOTES : 1. Thermal Resistance (Junction to Ambient): Vertical PC Board Mounting, 0.5” (12.7mm) Lead Length. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. FM250C FM260C .70 UNITS Volts 1.0 mAmps 10 mAmps 2002-6 2.0 1.5 FM 0 25 M2 C-F 60 0C 0.5 C 24 -FM 0C 1.0 22 Single Half Wave 60HZ Resistive or Inductive Load FM AVREAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE P.C.B Mounted on 0.4X0.4"(10X10mm) copper pad areas 0 0 25 50 75 100 125 150 LEAD TEMPERATURE, ( ) 175 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( FM220C THRU FM260C ) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 10 INSTANTANEOUS REVERSE CURRENT (mA) 1.0 TJ = 75 0.1 TJ = 25 .01 .001 JUNCTION CAPACITANCE, (pF) TJ = 125 10 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 4 - TYPICAL JUNCTION CAPACITANCE 400 200 TJ = 25 100 80 60 40 20 10 .1 FIG. 3B - TYPICAL REVERSE CHARACTERISTICS 100 FM250C-FM260C 10 TJ = 150 1.0 TJ = 125 0.1 TJ = 75 .01 TJ = 25 .001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT (mA) FM220C-FM240C TJ = 25 Pulse Width = 300uS 1% Duty Cycle .1 .1 .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 3A - TYPICAL REVERSE CHARACTERISTICS 100 FM220C FM230C FM240C FM250C FM260C 1.0 70 60 8.3ms Single Half Sine-Wave 40 JEDEC Method 20 10 0 .4 1.0 4 10 REVERSE VOLTAGE, (V) 40 80 1 2 4 6 810 20 40 80100 NUMBER OF CYCLES AT 60Hz RECTRON Mounting Pad Layout 0.185 MAX. (4.69 MAX.) 0.121 MIN. (3.07 MIN.) 0.060 MIN. (1.52 MIN.) 0.320 REF Dimensions in inches and (millimeters) RECTRON