ITS 901 Connectors ITS 901 00 - 2 Front and Rear Mount Receptacle Assembly for Jacketed Cable ITS 901 00 50-2 P W 2 XX Modification Omitted (for Standard) XX (See Table 3 - Modification Codes) Series ITS 901 Multi Pole Power Bayonet Connector Connector Shell Style 00 (Front and Rear Mount Receptacle with Backshell) Connector Backshell 2 (Jacketed Cable Clamp) Alternative Rotation Omitted (for Standard Version) W: 90°(Second Polarization Key) Contact Arrangement 50-2 (See Table 1 - Inserts) B Contact Gender P (Male with Finger Test Protection-Load Side) S (Female) TABLE 3: MODIFICATION CODES Name Modification Omitted Standard B0 Connector Less Contacts F7 Conductive Black Plating MXX Modified Contacts M3A, M3B and M3C for 3 Contacts Type M4A, M4B and M4C for 4 Contacts Type Application Notes: - Front and Rear mount receptacle with backshell for jacketed cable. RoHS Compliant. - Working voltage: 800-1000 Vac. Test voltage: 2800 - 3800 Vac 50Hz (1 min.). See Table 1 - Inserts. - Water proof : IP67 level (coupled connectors). - Contact resistance: 0.2 to 0.5 mΩ Max. - Temperature range: -55 +125°C. - Contact: copper alloy with silver plating. - Insulator: black thermoplastic resin according with UL94V0-NFF16-102 I1 F2 (Exigency 3). - Shells: Aluminium alloy with electrodeposited black paint. © 2011 Glenair, Inc. CAGE Code A6854 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.it e-mail: [email protected] B15 www.glenair.com - ITS 901 Connectors 52 M 60x1.5 52 M 60x1.5 89.5 ±0.1 89.5 ±0.1 ITS 901 00 - 2 Front and Rear Mount Receptacle Assembly for Jacketed Cable 195 max. 195 max. 90.0 90 ±0.15 90 ±0.15 Ø MIN ÷ Ø MAX -SEE TABLE 2- KEY KEY 80 84 KEY 80 Ø 45.0 89.5 ±0.15 Ø 89.5 89.5 ±0.15 KEY KEY 8480 KEY 84 X 8.5 ±0.1 44 X 8.5 7.5 Ø MIN ÷ Ø MAX -SEE TABLE 2- 4 X 8.5 ±0.1 40.5 40.5 ±0.1540.5 ±0.15 7.5 ±0.4 7.5 ±0.4 110 ±0.15 110 ±0.15 B 200 max. 200 max. 200 Max REV. DEL / OF 03 CODICE / CODE 3/5 / 1ª EMISS. / 1st EMISS. FORM. UJ... 25/09/2009 PAG. / PAGE 2266 TABLE 1 - INSERTS 11/12/2008 A4 Contact Crimp Bucket THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC. Insert Front View VERSIONI DISPONIBILI PER GRUPPO C GROUP C AVAILABLE VERSIONS Arrangement 50-2 50-3 50-31 50-N31 Contact Type 4 3 3 (3) - 1 (2) 3 (3) - 1 (1) 4A, 4B and 4C 3A, 3B and 3C 3A, 3B and 3C 3A, 3B and 3C 9.7 38.0 Alternative Contact Type 110 ±0.15 110 ±0.15 110.0 N° SPC / SPC N° Working Voltage Test Voltage 800 VAC 2.800 VAC C213 2.800 VAC 3.5 3.5 Creepage Distance (mm) 9.7 9.7 L Ø TERMINALE CONTATTO LUNGH. TERMINALE SEZ. CAVO INDICATIVO CONTACT BUCKET Ø 800 VAC 1.000 BUCKET VAC.8 LENGTH INDICATIVE CABLES SECT. L [±0.2] mm ØK [+0.1 / 0] mm Ø 21.3 240 mm² 2.800 VAC 3.800 VAC 28 Ø 19.2 185 mm² 3.5 Ø 15.4 12.0 23 120 mm² Ø 12.2 70 mm² CONTATTO 800 VAC CONTACT Clearance in Air (mm) Ø KA C192 C154 C122 TABLE 2 - STANDARD AND ALTERNATIVE CONTACTS (Referred to TABLE 1) Dado autofrenante Self locking nut Crimp Bucket -A(mm) Il serraggio vite + dado autofrenante assicura una connessione affidabile Cable Max nonostante leWorking vibrazioni. La coppia di serraggio nonCurrent interessa la debolezza dei Section Current filetti nel rame. (mmq) (A) * (A) * Contact Type Male Contact P/N Female Contact P/N 1 901-1-P-550G10 901-1-S-550G10 Vite 5.5 Screw 2 901-2-P-1150G10 901-2-S-1150G10 11.5 AWG 1/0 The tightening screw + self locking nut assures a reliable connection despite vibrations. not AWG 4 The coupling 120 torque does 150 affect the weakness of the copper. 150 250 350 450 3 901-3-P-1650G10 Sistema di aggancio system AWG 4/0 901-3-S-1650G10 Hooking 16.5 4 901-4-P-1780G10 901-4-S-1780G10 17.8 Il sistema elimina dalla vite centrale di 262 MCMdi aggancio 450 520 3A 901-3A-P-1440G10 901-3A-S-1440G10 14.4 AWG 3/0 320 400 The hooking system avoids any tensile strength 3B 901-3A-P-1440G10 901-3A-S-1440G10 13.3 from the central coupling screw. AWG 2/0 250 300 3C 901-3C-P-1150G10 901-3C-S-1150G10 11.5 AWG 1/0 250 150 4A 901-3-P-1650G10 16.5 AWG 4/0 350 450 4B 901-3A-P-1440G10 901-3A-S-1440G10 A CONTACT 14.4 AWG 3/0 320 400 4C 901-3A-P-1440G10 901-3A-S-1440G10 * Related to cables section © 2011 Glenair, Inc. 901-3-S-1650G10 accoppiamento qualunque tensione di trazione. FASE 1 PHASE 1 FASE 2 PHASE 2 CONTATTO A 13.5 FASE 3 PHASE 3 FASE 4 PHASE 4 FASE 5 PHASE 5 AWG 2/0 di fasatura 250 320 Il sistema permette di configurare FASE 6 PHASE 6 semplicemente il contatto per evitare errori di accoppiamento. The phasing system allows to easily configure the contact in order to avoid coupling errors. CAGE Code A6854 CONTATTO B B CONTACT Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.it e-mail: [email protected] B16 CONTROLLATO / CHECKED COMPILATO / DONE APPROVATO / APPROVED www.glenair.com - Firma Data Firma Data Firma Data Sign .............................. Date 24/07/2009 Sign .............................. Date 25/09/2009 Sign .............................. Date 25/09/2009