NT802C/NT804C/NT812C SERIES NAUTILUX - LED Ceiling mount TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION NT802C 12345- Cast aluminum enclosed housing. Silicone gasket with memory retention. Cast aluminum heat dissipating fins. White enamel reflective surface. Borosilicate frosted glass diffuser with internal corrugated structural pattern. 6- Cast aluminum front cross blades. All stainless steel hardware. NT804C 6 5 4 3 2 1 NT812C NT802C Cast aluminum single cross blades MATERIALS Nautilux is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. The borosilicate thermal shock frosted glass is designed to be used as a full diffuser or coupled with a selection of multiple cast aluminum blades. LED platform is easily positioned to produce downward light while glass diffuser remains illuminated. LED module is easily removable and secured with a heat dissipating plate for optimal light performance. ELECTRICAL LED NT804C Cast aluminum double cross blades NT812C Frosted glass diffuser MOUNTING Maximum weight: 13lbs (5.9kg) Mounts on a standard 4” (102) octagonal electrical box with 3 1/2” (89) C/C mounting holes. CERTIFICATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometry tested per IES LM-79-08 / IES LM80 test report. CE certification on request. Rated IP65. DRIVER Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), optional 347V on request, minimum operating temperature of -30ºC/-22ºF, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110ºC). LED 12” (305) Standard 4000K LED platform included. Optional 3000K and 3500K. Removable modular LED platform. LIFE NT802C 4” NT804C (101) FINISH Rev 0 51,000hrs L77B50 (based on IESNA TM-21 Test Method and LM-80 data). 68,000hrs L70B50 (calculated projection from LM-80 data). 3” NT812C (76) LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Oct 2016 Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. LUMINIS.COM 1 NT802C/NT804C/NT812C SERIES NAUTILUX - LED TYPICAL PHOTOMETRY SUMMARY Descriptive Information NT802C-L1W30r1 Total Lms: XXXX Lumens Total Input Watts: X W Source: LED Efficacy: XXX Lumens/Watt BUG: BX-UX-GX CCT/CRI: 4000K/80 Maximum Candela: XXX 958 719 478 240 Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION MODEL# LED LIGHT SELECTION SUFFIX NT802C L1W12 L1W18 L1W30 VOLTAGE INPUT WATTS DELIVERED LUMENS 12W 18W 30W 588 880 1380 1 FINISH STANDARD COLORS CRI CCT K 80 4000K 120V 277V WHT BKT BZT MST GRT DGT CHT Snow white Jet black Bronze Matte silver Titanium gray Gun metal Champagne OPTIONAL COLORS NT804C CS Custom color RAL RAL# color (Refer to color chart) NT812C OPTIONS ELECTRICAL FS PH 347L ACCESSORIES Fuse2 Photocell2 347V input power driver PC6 Polycarbonate lens Alternate CCT K LED K3 3000K CCT LED K35 3500K CCT LED Oct 2016 Rev 0 NOTES 1- Luminaires are factory prewired for 120V (if no voltage is specified.) For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 2