CRYSTEK CVXO-018T Voltage controlled crystal oscillator Datasheet

Voltage Controlled
Crystal Oscillator
CVXO-018T Model
5×7 mm SMD, 3.3V, HCMOS
Frequency Range:
Frequency Stability:
Temperature Range:
Operating:
(Option M)
(Option X)
Storage:
Input Voltage:
Control Voltage:
Settability* At Nominal:
Frequency Pulling:
Input Current:
Output:
Load:
Symmetry:
Rise/Fall Time:
Logic:
1 MHz to 52 MHz
±25ppm to ±100ppm
0°C to 70°C
-20°C to 70°C
-40°C to 85°C
-45°C to 90°C
3.3V ±0.3V
1.65V ±1.65V
1.65V ±0.25V
±100ppm Min
10mA Max
HCMOS
15pF
40/60% Max @ 50% Vdd
5ns Max @ 20% to 80% Vdd
"0" = 10% Vdd Max
"1" = 90% Vdd Min
±10% Max
<3ppm 1st year, <1ppm every year thereafter
Linearity:
Aging:
Dimensions inches (mm)
All dimensions are Max unless otherwise specified.
Designed
to
meet
today's
requirements for 3.3V Voltage
Controlled Crystal Oscillator SMD
Applications.
The CVXO-018T
provides a disable function for
ICT (in-circuit-testing). Available
on 16mm tape and reel in
quantities of 1K.
SUGGESTED PAD LAYOUT
0.055 Typ
(1.40 Typ)
0.071 SQ
(1.80)
0.045 ±0.008
(1.14 ±0.20)
0.276 ±0.008
(7.00 ±0.20)
P/N
Frequency
YYWW XX
0.197 ±0.008
(5.00 ±0.20)
#1
#2
#3
#6
#5
#4
0.071
(1.80)
Denotes pad 1
YYWW=Date Code XX=Lot Code
0.148
(3.75)
0.100
(2.54)
0.200
(5.08)
0.200
(5.08)
0.01uF Bypass Capacitor Recommended
TEMPERATURE
RECOMMENDED REFLOW SOLDERING PROFILE
Ramp-Up
3°C/Sec Max.
260°C
217°C
Critical
Temperature Zone
Ramp-Down
6°C/Sec.
Crystek Part Number Guide
CVXO - 018T - X - 25 - 49.152
200°C
#1
#2
#3
#4
150°C
Preheat
180 Secs. Max.
8 Minutes Max.
#1 Crystek VCXO
#2 Model
#3 Temp. Range: Blank= 0/70°C, M= -20/70°C, X= -40/85°C
#4 Stability: (see Table 1)
#5 Frequency in MHz: 3 or 6 decimal places
90 Secs. Max.
260°C for
10 Secs. Max.
Connection
1
2
3
4
5
6
Volt Cont.
Enable/Disable
GND
Ouput
N/C
Vdd
Blank (std)
25
50
± 100ppm
± 25ppm
± 50ppm
Table 1
Enable/Disable
Function pin 2
Output pin
Open
"1" level Vdd-0.4 Min
"0" level 0.4 Max
Active
Active
High Z
Specifications subject to change without notice.
*Settability is the Control Voltage at which the Output Frequency is equal to the nominal Frequency.
C
Stability Indicator
Example:
CVXO-018TX-25-25.000 = 3.3V, -40/85°C, 40/60, 25ppm, 25.000 MHz
CVXO-018T-50-19.660800 = 3.3V, 0/70°C, 40/60, 50ppm, 19.660800 MHz
NOTE: Reflow Profile with 240°C peak also acceptable.
PIN
#5
CRYSTEK
CORPORATION
Rev: L
Date: 10-May-2016
Page 1 of 1
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
Similar pages