Dot Matrix LED ■ General Description Sharp's dot matrix LEDs can express characters and symbols on a display. (Number of dots: 5✕7, 8✕8, 16✕16). We can supply wide color variation; high-luminosity red T series, yellow-green E series, sunset orange S series, dichromatic emission, etc. LT5038T LT5017ED LT5040ET LT5016ED Common pins Outline dimensions (mm) *1 Number of dots ■ Dot Matrix LED Radiation color Outline dimensions T D Red (High-luminosity) Red K LT5038T A LT5037T K 20✕20 K A LT5010T 8✕8 30.2✕30.2 K A K 31.8✕31.8 A K LT5013T 31.9✕31.9 A A K 16✕16 A 40✕40 LT5005T A A 64✕64 A 96✕96 *1 Common pins show row.(Column row) 5✕7 (Notice) S Sunset orange E Yellow-green E T Red Yellow-green+ (High-luminosity) E D Yellow+ Red green Page Figure 1 12.7✕17.8 LT5017ED LT5027ED LT5010D LT5105D LT5106D LT5106S LT5008D LT5014D 4 LT5105E LT5106E LT5007ED LT5008ED LT5008E LT5014S 2 3 → → 5 5/6 7 LT5014E LT5040ET LT5005D LT5005S 8 LT5005E → LT5050ET LT5016ED LT5026ED 9 10 11 12 ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 152 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) Dot Matrix LED ■ Absolute Maximum Ratings (Ta=25˚C) Figures shown below are values per dot. Forward current Peak forward current Outline Model No. Number Radiation color dimensions IF IFM of dots (mm) (mA) Anode common*1 Cathode common*1 (mA) 50*2 15 5✕7 12.7✕17.8 Red(High-luminosity) LT5037T LT5038T LT5017ED 15 50*2 20✕20 Yellow-green/Red Yellow-green/Red LT5027ED 15 50*2 15 50*2 Red(High-luminosity) LT5010T LT5010D Red 15 50*2 LT5105D LT5106D 30.2✕30.2 Red 20 50*2 8✕8 LT5106S Sunset orange 20 50*2 LT5106E LT5105E 20 50*2 Yellow-green LT5008ED LT5007ED Yellow-green/Red 15 50*2 31.8✕31.8 Red LT5008D 15 50*2 LT5008E Yellow-green 15 50*2 LT5013T 15 80*3 Red(High-luminosity) LT5014D Red 15 80*3 31.9✕31.9 LT5014S 15 80*3 Sunset orange LT5014E Yellow-green 15 80*3 31.7✕31.7 Yellow-green/Red(High-luminosity) LT5040ET 15 50*2 Red(High-luminosity) LT5005T 15 80*3 16✕16 LT5005D 15 80*3 Red LT5005S 40✕40 Sunset orange 15 80*3 LT5005E 15 80*3 Yellow-green Yellow-green/Red(High-luminosity) LT5050ET 15/15 50/50*3 64✕64 Yellow-green/Red LT5016ED 15 80*3 96✕96 Yellow-green/Red LT5026ED 15 80*3 *1 Common pins show row.(Column row) *2 Duty ratio=1/10, Pulse width=0.1ms *3 Duty ratio=1/16, pulse width=0.1ms ■ Electro-optical Characteristics Derating factor (mA/˚C) Pulse 1.45 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45/1.45 1.45 1.45 Reverse voltage VR (V) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5/5 5 5 Operating temperature Storage temperature Topr. Tstg. (˚C) (˚C) -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +70 -20 to +60 -20 to +80 -20 to +70 -20 to +80 -20 to +70 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 (Ta=25˚C) Figures shown below are values per dot. Forward voltage Outline Luminous intensity Peak emission wavelength Spectrum radiation bandwidth Reverse current Model No. VF(V) Radiation color dimensions ∆λ(nm) IR(µA) IV (mcd) λp (nm) IF 1 1 (mm) Anode common* Cathode common* TYP. MAX. TYP. TYP. TYP. (mA) MAX. 1.85 3.0 (4.5) 660 20 50 100 5✕7 12.7✕17.8 Red(High-luminosity) LT5037T LT5038T * LT5017ED 2.4/2.2 3.0 1.9/1.6 565/635 10 30/35 50 20✕20 Yellow-green/Red* 3.0 2.5/2.0 565/635 10 30/35 50 Yellow-green/Red LT5027ED 2.4/2.2 2.3 2.2 660 10 20 50 1.85 Red(High-luminosity) LT5010T 2.7 1.11 635 10 35 LT5010D 50 Red 2.2 2.7 1.11 635 10 35 LT5106D LT5105D 10 30.2✕30.2 Red 2.2 8✕8 2.7 1.11 610 10 35 LT5106S 10 Sunset orange 2.2 2.7 1.69 565 10 30 LT5106E LT5105E 10 2.4 Yellow-green * 2.08/1.56 565/635 10 30/35 LT5008ED LT5007ED 2.4/2.2 3.0/2.7 50 Yellow-green/Red 31.8✕31.8 Red 2.03 635 10 35 LT5008D 50 3.0 2.2 2.7 565 10 30 LT5008E 50 3.0 Yellow-green 2.4 LT5013T 1.35 660 10 20 50 3.0 1.85 Red(High-luminosity) 1.3 635 10 50 LT5014D 35 3.0 Red 2.2 31.9✕31.9 1.11 610 10 35 LT5014S 50 3.0 2.2 Sunset orange 1.7 565 10 30 LT5014E 50 3.0 Yellow-green 2.4 1.45/1.70 565/660 100 30/20 50 3.0 31.7✕31.7 Yellow-green/Red(High-luminosity) * LT5040ET 2.4/1.85 1.78 660 10 20 50 3.0 Red(High-luminosity) LT5005T 1.85 16✕16 LT5005D 1.04 635 10 35 50 2.7 2.2 Red LT5005S 40✕40 Sunset orange 1.11 610 10 35 50 2.7 2.2 LT5005E 1.3 565 10 30 50 3.0 2.4 Yellow-green (1.9)/(3.0) 565/660 100 30/20 10 2.4/1.85 Yellow-green/Red(High-luminosity) * LT5050ET 3.0 LT5016ED 64✕64 Yellow-green/Red * 565/635 10 30/35 50 3.0 5.2/3.9 2.4/2.2 7.15/5.85 96✕96 Yellow-green/Red * 565/635 10 30/35 50 3.0 LT5026ED 2.4/2.2 * Each figure shown in the table is yellow-green/red. *1 Common pins show row.(Column row) *2 IFM=50mA *3 IF=10mA *2 Number of dots *3 VR (V) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 4 4 4 4 3 4 4 ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 153 1 Outline Dimensions(Unit:mm) 20.0+0 -0.4 P2.5✕7=17.5 Column 1 8 2 1.0 3.0 64-ø 1.8 6 7 35-ø2.0 24-ø 0.45 Internal connection diagram P2.0✕7=14.0 LT5037T 10 7 8 4.6 7.5 7.5 5.0 5.0 3 1.0 1 12 11 2.0 6.6 0.4 MAX. Calking 20.0+0 -0.4 P2.5✕7=17.5 Row 8 1 P I N 12 P I N 1 P2.54✕5=12.7 17.78 ±0.4 P2.54✕6=15.24 2.0 12.7 ±0.3 P2.54✕4=10.16 6.0+1.0 -0.5 Dot Matrix LED 2 9 12-ø 0.45 +0.15 -0 1 8 9 16 24 17 4 7.62 5 7.5 6 Internal connection diagram 3 4-ø4.0 MAX. Calking I Do t LT5038T 1 7.5 9 Row 1 10 7 8 10 Row 2 11 Row 3 12 Row 4 12 13 Row 5 11 14 Row 6 2 15 Row 7 16 Row 8 9 4 LT5037T/LT5038T 21 5 22 6 23 8 10 Row1 B 5 Row 5 30.2±0.2 1 3.81✕7=26.67 1 (For all 64 pcs.) PIN.18 0.4MAX Calking 4-C0.4 8 22.86 P2.5✕7=17.5 +0 -0.4 Column +0 -0.4 Red Yellow-green 2.7 ±0.2 30.2 20 8 2.7 4 20 24 LT5017ED 3 64-❏1.9 7 Column 8 20 Column 7 4 Column 6 19 Column 5 3 Column 4 6 18 Column 3 2 Column 1 5 17 Column 2 1 1.95 Row8 P2.5✕7=17.5 0.05 3 PIN.1 9 Column1 Column8 3.81✕7=26.67 9 Row 1 10 Row 2 11 Row 3 12 Row 4 Row 6 15 Row 7 9 16 16 Row 8 17 24 7.5 4-ø4.0MAX Calking 4 20 21 5 22 6 23 7 24 16-ø0.45 2.54✕8=20.32 0.05 1.95 LT5010❏ Series/LT5106❏ Series Internal connection diagram 18 2 17 15 6 8 Column 8 3 19 Column 7 18 Column 6 2 Column 5 17 Column 2 1 Column 4 Row 5 14 Column 3 13 8 1 7.5 (Notice) I Do t Column 1 7.5 7.5 P2.0✕7=14 4.5 Internal connection diagram 24-ø0.45 LT5027ED 1.0 8.0 1 6 Dot shows PIN1 Red Yellow-green LT5105❏ Series Internal connection diagram 18 2 17 15 6 8 11 9 12 10 13 14 5 4 12 10 13 14 5 4 1 3 1 3 8 11 9 LT5010❏ Series LT5105❏ Series/LT5106❏ Series ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 154 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) Dot Matrix LED 31.8 3.0 4.0✕7=28.0 3.0 4.0✕7=28.0 1.0 16.0 16.0 31.8±0.2 1.0 4.0✕7=28.0 31.8±0.2 ±0.2 6 31.8±0.2 4.0✕7=28.0 5 Outline Dimensions(Unit:mm) 64-ø 3.0 2.0 Direction of Pin1 3.0 2.0 -ø 64 LT5007ED 6.0 - 6.0 Direction of Pin1 24-ø0.55 2.54✕11=27.94 LT5008D 8.0 ø1 .5 4- 8.0 5 . ø1 4- 1 12 14 13 24.0 16-ø0.55 2.54✕7=17.78 Internal connection diagram 11 Row 1 16 24.0 9 Row 2 8 Red 12 Row 3 24.0 1 9 13 Row 4 5 Row 5 4 Row 6 Yellow-green Internal connection diagram : 1 dot LT5008ED LT5007ED 24 23 22 21 20 19 18 17 6 5 8 7 10 9 12 11 24 23 22 21 20 19 18 17 6 5 8 7 10 9 12 11 1 Row 7 16 2 15 14 6 7 10 8 COLUMN1 COLUMN2 COLUMN3 COLUMN4 COLUMN5 COLUMN6 COLUMN7 COLUMN8 3 Row 8 24.0 LT5008❏ Series 7 31.9±0.2 1.95 13 14 14 15 15 16 16 4 4 3 3 2 2 1 1 LT5007ED/LT5008ED 8 7.5 1.95 1.95 31.7±0.3 P2.0✕15=30.0 2.0✕13=26.0 2.0 10.0 2.0✕13=26.0 10.0 31.7±0.3 P2.0✕15=30.0 2.0 256-ø1.4 1.95 31.9±0.2 13 265-ø 1.6 Cover case Internal connection diagram LT5013T Green Red 2.0 8.0 9 16 12.0 8.0 10.0 14.0 Row16 25 Column1 Column16 24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8 17 4-ø 2.0 24 48-ø 0.45 P2.0✕14=28.0 2.0 Row16 LT5013T/LT5014❏ Series 30 18 32 28 20 26 22 25 9 6 10 4 12 16 2 14 Internal connection diagram 25 31 32 33 34 35 26 36 48 37 42 41 43 1 2 6 7 11 12 30 29 40 47 39 46 13 14 18 19 23 24 38 45 27 44 28 7 6 25 Row1 3.0 2.0 LT5014❏ 12.0 32 14.0 8 10.0 1 30 18 32 28 20 26 22 25 9 6 10 4 12 16 2 14 6.0 3.8 1.0 Row1 2.0✕7=14.0 1.0 (24.0) 14.0 10.0 2.5 Column1 Column16 24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8 26 30 31 35 36 5 4- ø 1.0 Spacer 4 3 21 20 9 8 22 37 47 (24.0) 48 19 4-ø 4.0 MAX. Calking 11 1 10 2 12 13 23 14 15 16 17 18 24 LT5040ET ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 155 Dot Matrix LED Outline Dimensions(Unit:mm) Row1 25 26 27 28 29 30 31 32 16 15 14 13 12 11 10 9 32-ø0.5 2.0 2.5✕7=17.5 4-ø4.0MAX 9 12.5 4-ø1.2 10.0 8 10.0 Pin1 10.0 16 10.0 32 4-ø1.1 10.0 30.0 15.0 15.0 10.0 7.5 24 17 Row16 4.95 33 31 32 17 18 34 *4.95 Calking (*12.5) 16 9 (*10.0) P*2.5✕7=*17.5 (15.0) (15.0) Internal connection diagram Column16 Row1 25 26 27 28 29 30 31 32 16 15 14 13 12 11 10 9 15.0 30.0 Row16 LT5005❏ Series 11 8 (*12.5) 48 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 7.5 15.0 1 47 LT5005D/S/E Column1 25 (*10.0) 1 15 2 14 3 13 4 12 5 11 6 10 7 9 8 8 9 7 10 6 11 5 12 4 13 3 14 2 15 1 16 Green Red 48 32 47 31 46 30 45 29 44 28 43 27 42 26 41 25 40 24 39 23 38 22 37 21 36 20 35 19 34 18 33 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Column LT5050ET 256-ø3.0 64.0MAX P4.0✕15=60.0 11.1 12 20.7 48-❏0.5 256-ø5.0 96.0MAX 64.0MAX P4.0✕15=60.0 20.7 11.1 P6.0✕15=90.0 Row1 48-0.5 6.7 84.0 4.0✕15=60.0 96.0MAX Row16 Column 16 P6.0✕15=90.0 Row1 Column 1 Row16 Column 16 7.1 Screw head 1.5 Column 1 48.0 4.0 4.0 9.7 4.0✕7=28.0 16.0 4.0✕7=28.0 16.0 8 17 33 34 9 4.0✕15=60.0 32 31 48 16.0 4.0✕7=28.0 1 47 56 16 Row L T 5 0 05 D Column1 Column16 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 P*2.5✕7=*17.5 (*17.45) (*17.45) 0.5MAX Internal connection diagram LT5005T (10.0) 2.4 (15.0) 2.5✕13=32.5 2.4 1.5 6.0 16 (15.0) 256-ø1.8 8 256- ø2.0 Pin1mark Pin9 Pin1 1.0t 5.7 3.0 2.4 Row16 16 Column 1 (*12.5) P*2.5✕7=*17.5 16 1.8 1.0 1 P*2.5✕7=*17.5 (*10.0) 2.5✕7=17.5 32 39.8MAX 40.0MAX 2.5✕13=32.5 Row1 Pin25 39.9 ±0.2 2.45 P2.5✕13=32.5 2.45 ±0.15 17 48- ø 0.45 10 Column 16 Pin 24 39.9 ±0.2 2.45 P2.5✕13=32.5 2.45 2.4 Column 1 Row 40.0MAX 9 36.0 Internal connection diagram 32 18 Internal connection diagram 16 Screw head 5-ø3.5 17 33 20.0 31 32 18 34 47 16 Row1 17 32 Row16 18 17 31 16 1 15 2 1 33 48 48 Row1 4.0✕7=28.0 16 33 Red Yellow-green Row16 1 dot Column1 1 dot Column16 48 Column1 1 Red Column16 Yellow-green LT5016ED (Notice) LT5026ED ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 156 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/)