ON MUN2214T1G Bias resistor transistor Datasheet

MUN2211T1 Series
Preferred Devices
Bias Resistor Transistors
NPN Silicon Surface Mount Transistors
with Monolithic Bias Resistor Network
This new series of digital transistors is designed to replace a single
device and its external resistor bias network. The BRT (Bias Resistor
Transistor) contains a single transistor with a monolithic bias network
consisting of two resistors; a series base resistor and a base-emitter
resistor. The BRT eliminates these individual components by
integrating them into a single device. The use of a BRT can reduce
both system cost and board space. The device is housed in the
SC-59 package which is designed for low power surface
mount applications.
http://onsemi.com
NPN SILICON
BIAS RESISTOR
TRANSISTORS
PIN 3
COLLECTOR
(OUTPUT)
Features
•Simplifies Circuit Design
•Reduces Board Space
•Reduces Component Count
•Moisture Sensitivity Level: 1
•ESD Rating - Human Body Model: Class 1
PIN 2
BASE
(INPUT)
R1
R2
PIN 1
EMITTER
(GROUND)
- Machine Model: Class B
•The SC-59 Package can be Soldered Using Wave or Reflow
•The Modified Gull-Winged Leads Absorb Thermal Stress During
Soldering Eliminating the Possibility of Damage to the Die
2
•Pb-Free Packages are Available
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Symbol
Value
Unit
Collector‐Base Voltage
VCBO
50
Vdc
Collector‐Emitter Voltage
VCEO
50
Vdc
IC
100
mAdc
Rating
Collector Current
Total Device Dissipation
TA = 25°C
Derate above 25°C
Symbol
Max
Unit
PD
230 (Note 1)
338 (Note 2)
1.8 (Note 1)
2.7 (Note 2)
mW
°C/W
Thermal Resistance, Junction‐to‐Ambient
RqJA
540 (Note 1)
370 (Note 2)
°C/W
Thermal Resistance, Junction‐to‐Lead
RqJL
264 (Note 1)
287 (Note 2)
°C/W
-55 to +150
°C
Junction and Storage Temperature
Range
TJ, Tstg
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR-4 @ Minimum Pad.
2. FR-4 @ 1.0 x 1.0 inch Pad.
© Semiconductor Components Industries, LLC, 2007
July, 2007 - Rev. 13
1
SC-59
CASE 318D
STYLE 1
MARKING DIAGRAM
8xMG
G
1
THERMAL CHARACTERISTICS
Characteristic
3
1
8x = Device Code (Refer to page 2)
M
= Date Code*
G
= Pb-Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending
upon manufacturing location.
ORDERING INFORMATION
See detailed ordering and shipping information in the table on
page 2 of this data sheet.
DEVICE MARKING INFORMATION
See specific marking information in the Device Marking and
Resistor Values table on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MUN2211T1/D
MUN2211T1 Series
DEVICE MARKING AND RESISTOR VALUES
Device
MUN2211T1
MUN2211T1G
MUN2211T3
MUN2211T3G
MUN2212T1
MUN2212T1G
MUN2213T1
MUN2213T1G
MUN2214T1
MUN2214T1G
MUN2214T3
MUN2214T3G
MUN2215T1
MUN2215T1G
MUN2216T1
MUN2216T1G
MUN2230T1
MUN2230T1G
MUN2231T1 (Note 3)
MUN2231T1G (Note 3)
MUN2232T1
MUN2232T1G
MUN2233T1
MUN2233T1G
MUN2234T1 (Note 3)
MUN2234T1G (Note 3)
MUN2236T1
MUN2236T1G
MUN2237T1
MUN2237T1G
MUN2240T1 (Note 3)
MUN2240T1G (Note 3)
MUN2241T1 (Note 3)
MUN2241T1G (Note 3)
Package
Marking
R1 (K)
R2 (K)
Shipping†
SC-59
8A
10
10
3000/Tape & Reel
SC-59
(Pb-Free)
8A
10
10
3000/Tape & Reel
SC-59
8A
10
10
10,000/Tape & Reel
SC-59
(Pb-Free)
8A
10
10
10,000/Tape & Reel
SC-59
8B
22
22
3000/Tape & Reel
SC-59
(Pb-Free)
8B
22
22
3000/Tape & Reel
SC-59
8C
47
47
3000/Tape & Reel
SC-59
(Pb-Free)
8C
47
47
3000/Tape & Reel
SC-59
8D
10
47
3000/Tape & Reel
SC-59
(Pb-Free)
8D
10
47
3000/Tape & Reel
SC-59
8D
10
47
10,000/Tape & Reel
SC-59
(Pb-Free)
8D
10
47
10,000/Tape & Reel
SC-59
8E
10
∞
3000/Tape & Reel
SC-59
(Pb-Free)
8E
10
∞
3000/Tape & Reel
SC-59
8F
4.7
∞
3000/Tape & Reel
SC-59
(Pb-Free)
8F
4.7
∞
3000/Tape & Reel
SC-59
8G
1.0
1.0
3000/Tape & Reel
SC-59
(Pb-Free)
8G
1.0
1.0
3000/Tape & Reel
SC-59
8H
2.2
2.2
3000/Tape & Reel
SC-59
(Pb-Free)
8H
2.2
2.2
3000/Tape & Reel
SC-59
8J
4.7
4.7
3000/Tape & Reel
SC-59
(Pb-Free)
8J
4.7
4.7
3000/Tape & Reel
SC-59
8K
4.7
47
3000/Tape & Reel
SC-59
(Pb-Free)
8K
4.7
47
3000/Tape & Reel
SC-59
8L
22
47
3000/Tape & Reel
SC-59
(Pb-Free)
8L
22
47
3000/Tape & Reel
SC-59
8N
100
100
3000/Tape & Reel
SC-59
(Pb-Free)
8N
100
100
3000/Tape & Reel
SC-59
8P
47
22
3000/Tape & Reel
SC-59
(Pb-Free)
8P
47
22
3000/Tape & Reel
SC-59
8T
47
∞
3000/Tape & Reel
SC-59
(Pb-Free)
8T
47
∞
3000/Tape & Reel
SC-59
8U
100
∞
3000/Tape & Reel
SC-59
(Pb-Free)
8U
100
∞
3000/Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
3. New devices. Updated curves to follow in subsequent data sheets.
http://onsemi.com
2
MUN2211T1 Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Min
Typ
Max
Unit
ICBO
-
-
100
nAdc
ICEO
-
-
500
nAdc
IEBO
-
-
0.5
0.2
0.1
0.2
0.9
1.9
4.3
2.3
1.5
0.18
0.13
0.05
0.13
0.2
0.1
mAdc
Collector‐Base Breakdown Voltage (IC = 10 mA, IE = 0)
V(BR)CBO
50
-
-
Vdc
Collector‐Emitter Breakdown Voltage (Note 4)
(IC = 2.0 mA, IB = 0)
V(BR)CEO
50
-
-
Vdc
hFE
35
60
80
80
160
160
3.0
8.0
15
80
80
80
80
160
160
60
100
140
140
350
350
5.0
15
30
200
150
150
140
350
350
-
-
-
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Characteristic
OFF CHARACTERISTICS
Collector‐Base Cutoff Current (VCB = 50 V, IE = 0)
Collector‐Emitter Cutoff Current (VCE = 50 V, IB = 0)
Emitter‐Base Cutoff Current
(VEB = 6.0 V, IC = 0)
MUN2211T1, G
MUN2212T1, G
MUN2213T1, G
MUN2214T1, G
MUN2215T1, G
MUN2216T1, G
MUN2230T1, G
MUN2231T1, G
MUN2232T1, G
MUN2233T1, G
MUN2234T1, G
MUN2236T1, G
MUN2237T1, G
MUN2240T1, G
MUN2241T1, G
ON CHARACTERISTICS (Note 4)
DC Current Gain
(VCE = 10 V, IC = 5.0 mA)
Collector‐Emitter Saturation Voltage
(IC = 10 mA, IB = 0.3 mA)
(IC = 10 mA, IB = 5 mA)
(IC = 10 mA, IB = 1 mA)
MUN2211T1, G
MUN2212T1, G
MUN2213T1, G
MUN2214T1, G
MUN2215T1, G
MUN2216T1, G
MUN2230T1, G
MUN2231T1, G
MUN2232T1, G
MUN2233T1, G
MUN2234T1, G
MUN2236T1, G
MUN2237T1, G
MUN2240T1, G
MUN2241T1, G
VCE(sat)
MUN2211T1, G
MUN2212T1, G
MUN2213T1, G
MUN2214T1, G
MUN2233T1, G
MUN2236T1, G
MUN2230T1, G
MUN2231T1, G
MUN2237T1, G
MUN2241T1, G
MUN2215T1, G
MUN2216T1, G
MUN2232T1, G
MUN2234T1, G
MUN2240T1, G
4. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0%.
http://onsemi.com
3
Vdc
MUN2211T1 Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued)
Symbol
Characteristic
Min
Typ
Max
-
-
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
-
-
R1
7.0
15.4
32.9
7.0
7.0
3.3
0.7
1.5
3.3
3.3
15.4
70
32.9
32.9
70
10
22
47
10
10
4.7
1.0
2.2
4.7
4.7
22
100
47
47
100
13
28.6
61.1
13
13
6.1
1.3
2.9
6.1
6.1
28.6
130
61.1
61.1
130
R1/R2
0.8
0.8
0.8
0.17
0.8
0.8
0.8
0.055
0.38
0.8
1.7
-
1.0
1.0
1.0
0.21
1.0
1.0
1.0
0.12
0.47
1.0
2.15
-
1.2
1.2
1.2
0.25
1.2
1.2
1.2
0.185
0.56
1.2
2.6
-
Unit
ON CHARACTERISTICS (Note 5) (Continued)
Output Voltage (on)
(VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kW)
(VCC = 5.0 V, VB = 3.5 V, RL = 1.0 kW)
(VCC = 5.0 V, VB = 5.5 V, RL = 1.0 kW)
(VCC = 5.0 V, VB = 4.0 V, RL = 1.0 kW)
(VCC = 5.0 V, VB = 5.0 V, RL = 1.0 kW)
Output Voltage (off)
(VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW)
(VCC = 5.0 V, VB = 0.050 V, RL = 1.0 kW)
(VCC = 5.0 V, VB = 0.25 V, RL = 1.0 kW)
Input Resistor
VOL
MUN2211T1, G
MUN2212T1, G
MUN2214T1, G
MUN2215T1, G
MUN2216T1, G
MUN2230T1, G
MUN2231T1, G
MUN2232T1, G
MUN2233T1, G
MUN2234T1, G
MUN2213T1, G
MUN2240T1, G
MUN2236T1, G
MUN2237T1, G
MUN2241T1, G
Vdc
VOH
MUN2211T1, G
MUN2212T1, G
MUN2213T1, G
MUN2214T1, G
MUN2233T1, G
MUN2234T1, G
MUN2230T1, G
MUN2215T1, G
MUN2216T1, G
MUN2231T1, G
MUN2232T1, G
MUN2236T1, G
MUN2237T1, G
MUN2240T1, G
MUN2241T1, G
MUN2211T1, G
MUN2212T1, G
MUN2213T1, G
MUN2214T1, G
MUN2215T1, G
MUN2216T1, G
MUN2230T1, G
MUN2231T1, G
MUN2232T1, G
MUN2233T1, G
MUN2234T1, G
MUN2236T1, G
MUN2237T1, G
MUN2240T1, G
MUN2241T1, G
Resistor Ratio
MUN2211T1, G
MUN2212T1, G
MUN2213T1, G
MUN2214T1, G
MUN2215T1, G
MUN2216T1, G
MUN2230T1, G
MUN2231T1, G
MUN2232T1, G
MUN2233T1, G
MUN2234T1, G
MUN2236T1, G
MUN2237T1, G
MUN2240T1, G
MUN2241T1, G
5. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0%.
http://onsemi.com
4
Vdc
kW
MUN2211T1 Series
PD, POWER DISSIPATION (mW)
350
300
250
200
150
100
50
0
-50
RqJA = 370°C/W
0
50
100
TA, AMBIENT TEMPERATURE (°C)
Figure 1. Derating Curve
http://onsemi.com
5
150
MUN2211T1 Series
1
1000
IC/IB = 10
VCE = 10 V
TA=-25°C
25°C
75°C
0.1
hFE, DC CURRENT GAIN
VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS - MUN2211T1
0.01
0.001
0
20
40
60
IC, COLLECTOR CURRENT (mA)
TA=75°C
25°C
-25°C
100
10
80
1
10
IC, COLLECTOR CURRENT (mA)
Figure 2. VCE(sat) versus IC
Figure 3. DC Current Gain
100
IC, COLLECTOR CURRENT (mA)
2
1
0
0
10
20
30
40
VR, REVERSE BIAS VOLTAGE (VOLTS)
25°C
75°C
f = 1 MHz
IE = 0 V
TA = 25°C
1
0.1
0.01
VO = 5 V
0.001
50
TA=-25°C
10
0
Figure 4. Output Capacitance
1
2
3
4
5
6
7
Vin, INPUT VOLTAGE (VOLTS)
TA=-25°C
VO = 0.2 V
25°C
75°C
1
0.1
0
10
8
9
Figure 5. Output Current versus Input Voltage
10
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
4
3
100
20
30
IC, COLLECTOR CURRENT (mA)
40
Figure 6. Input Voltage versus Output Current
http://onsemi.com
6
50
10
MUN2211T1 Series
1000
1
IC/IB = 10
VCE = 10 V
TA=-25°C
TA=75°C
25°C
25°C
hFE , DC CURRENT GAIN
VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS - MUN2212T1
75°C
0.1
0.01
-25°C
100
10
0.001
40
20
60
IC, COLLECTOR CURRENT (mA)
0
80
1
IC, COLLECTOR CURRENT (mA)
Figure 7. VCE(sat) versus IC
Figure 8. DC Current Gain
4
100
2
1
75°C
25°C
TA=-25°C
10
1
0.1
0.01
VO = 5 V
0
0
10
20
30
40
0.001
50
0
2
4
6
8
10
VR, REVERSE BIAS VOLTAGE (VOLTS)
Vin, INPUT VOLTAGE (VOLTS)
Figure 9. Output Capacitance
Figure 10. Output Current versus Input Voltage
100
VO = 0.2 V
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
IE = 0 V
TA = 25°C
3
100
10
TA=-25°C
10
75°C
25°C
1
0.1
0
10
20
30
IC, COLLECTOR CURRENT (mA)
40
Figure 11. Input Voltage versus Output Current
http://onsemi.com
7
50
MUN2211T1 Series
10
1000
TA=-25°C
IC/IB = 10
25°C
1
VCE = 10 V
TA=75°C
hFE , DC CURRENT GAIN
VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS - MUN2213T1
75°C
0.1
25°C
-25°C
100
0.01
0
20
40
60
IC, COLLECTOR CURRENT (mA)
10
80
10
1
Figure 12. VCE(sat) versus IC
Figure 13. DC Current Gain
1
100
IC, COLLECTOR CURRENT (mA)
0.4
TA=-25°C
10
1
0.1
0.01
0.2
0
10
20
30
40
VR, REVERSE BIAS VOLTAGE (VOLTS)
0.001
50
VO = 5 V
0
2
4
6
Vin, INPUT VOLTAGE (VOLTS)
100
VO = 0.2 V
TA=-25°C
10
25°C
75°C
1
0.1
0
10
8
10
Figure 15. Output Current versus Input Voltage
Figure 14. Output Capacitance
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
0.6
0
25°C
75°C
f = 1 MHz
IE = 0 V
TA = 25°C
0.8
100
IC, COLLECTOR CURRENT (mA)
20
30
IC, COLLECTOR CURRENT (mA)
40
50
Figure 16. Input Voltage versus Output Current
http://onsemi.com
8
MUN2211T1 Series
300
1
TA=-25°C
IC/IB = 10
TA=75°C
VCE = 10
250
25°C
hFE, DC CURRENT GAIN
VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS - MUN2214T1
0.1
75°C
0.01
25°C
200
-25°C
150
100
50
0.001
0
20
40
60
IC, COLLECTOR CURRENT (mA)
0
80
1
2
4
6
Figure 17. VCE(sat) versus IC
100
75°C
3
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
3.5
2.5
2
1.5
1
0.5
0
2
4
6 8 10 15 20 25 30 35 40
VR, REVERSE BIAS VOLTAGE (VOLTS)
45
25°C
TA=-25°C
10
VO = 5 V
1
50
Figure 19. Output Capacitance
0
2
4
6
Vin, INPUT VOLTAGE (VOLTS)
TA=-25°C
VO= 0.2 V
25°C
75°C
1
0.1
0
10
8
10
Figure 20. Output Current versus Input Voltage
10
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
90 100
Figure 18. DC Current Gain
4
0
8 10 15 20 40 50 60 70 80
IC, COLLECTOR CURRENT (mA)
20
30
IC, COLLECTOR CURRENT (mA)
40
Figure 21. Input Voltage versus Output Current
http://onsemi.com
9
50
MUN2211T1 Series
1
1000
IC/IB = 10
75°C
0.1
-25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
25°C
10
1
50
TA = -25°C
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 22. VCE(sat) versus IC
100
Figure 23. DC Current Gain
100
4
IC, COLLECTOR CURRENT (mA)
4.5
f = 1 MHz
IE = 0 V
TA = 25°C
3.5
3
2.5
2
1.5
1
0.5
75°C
10
25°C
1
TA = -25°C
0.1
0.01
VO = 5 V
0.001
0
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 24. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = -25°C
1
25°C
75°C
VO = 0.2 V
0.1
0
9
10
Figure 25. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
VCE = 10 V
75°C
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN2215T1
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 26. Input Voltage versus Output Current
http://onsemi.com
10
50
MUN2211T1 Series
1
1000
75°C
0.1
-25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
TA = -25°C
10
1
50
25°C
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 27. VCE(sat) versus IC
100
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
IE = 0 V
TA = 25°C
4
3.5
100
Figure 28. DC Current Gain
4.5
3
2.5
2
1.5
1
0.5
75°C
10
25°C
TA = -25°C
1
0.1
0.01
VO = 5 V
0.001
0
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 29. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = -25°C
1
25°C
75°C
VO = 0.2 V
0.1
0
9
10
Figure 30. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
VCE = 10 V
75°C
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN2216T1
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 31. Input Voltage versus Output Current
http://onsemi.com
11
50
MUN2211T1 Series
100
1
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN2230T1
75°C
0.1
-25°C
25°C
0.01
0.001
0
10
20
40
30
IC, COLLECTOR CURRENT (mA)
75°C
10
25°C
TA = -25°C
VCE = 10 V
1
50
1
10
IC, COLLECTOR CURRENT (mA)
Figure 32. VCE(sat) versus IC
Figure 33. DC Current Gain
4.5
IC, COLLECTOR CURRENT (mA)
100
4
f = 1 MHz
IE = 0 V
TA = 25°C
3.5
3
2.5
2
1.5
1
0.5
0
75°C
10
25°C
1
TA = -25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
50
0
Figure 34. Output Capacitance
1
2
7
8
3
4
5
6
Vin, INPUT VOLTAGE (VOLTS)
TA = -25°C
75°C
1
25°C
VO = 0.2 V
0.1
0
9
10
Figure 35. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
100
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 36. Input Voltage versus Output Current
http://onsemi.com
12
50
MUN2211T1 Series
1000
1
VCE = 10 V
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN2232T1
75°C
0.1
-25°C
25°C
0.01
0.001
0
10
20
40
30
IC, COLLECTOR CURRENT (mA)
TA = -25°C
10
1
50
75°C
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 37. VCE(sat) versus IC
100
Figure 38. DC Current Gain
100
IC, COLLECTOR CURRENT (mA)
6
f = 1 MHz
IE = 0 V
TA = 25°C
5
4
3
2
1
0
75°C
10
25°C
1
TA = -25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 39. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = -25°C
1
75°C
25°C
VO = 0.2 V
0.1
0
9
10
Figure 40. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
25°C
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 41. Input Voltage versus Output Current
http://onsemi.com
13
50
MUN2211T1 Series
1000
1
VCE = 10 V
IC/IB = 10
0.1
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN2233T1
75°C
-25°C
25°C
0.01
0.001
0
5
10
15
25
20
IC, COLLECTOR CURRENT (mA)
75°C
25°C
10
1
30
TA = -25°C
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 42. VCE(sat) versus IC
Figure 43. DC Current Gain
4
IC, COLLECTOR CURRENT (mA)
100
3.5
f = 1 MHz
IE = 0 V
TA = 25°C
3
2.5
2
1.5
1
0.5
0
75°C
10
25°C
1
TA = -25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 44. Output Capacitance
1
2
7
8
3
4
5
6
Vin, INPUT VOLTAGE (VOLTS)
TA = -25°C
1
75°C
25°C
VO = 0.2 V
0.1
0
9
10
Figure 45. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
100
5
10
15
20
IC, COLLECTOR CURRENT (mA)
Figure 46. Input Voltage versus Output Current
http://onsemi.com
14
25
MUN2211T1 Series
1000
1
VCE = 10 V
IC/IB = 10
TA=-25°C
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS - MUN2236T1
25°C
75°C
0.1
75°C
25°C
100
0.01
0
5
15
25
10
20
30
IC, COLLECTOR CURRENT (mA)
35
TA=-25°C
10
40
10
1
IC, COLLECTOR CURRENT (mA)
0.1
Figure 47. VCE(sat) versus IC
Figure 48. DC Current Gain
100
IC, COLLECTOR CURRENT (mA)
5
4.5
f = 1 MHz
lE = 0 V
TA = 25°C
4
3.5
3
2.5
2
1.5
1
0.5
0
75°C
TA=-25°C
10
25°C
1
VO = 5 V
0.1
0
5
10
15
20
25
30
35
40
VR, REVERSE BIAS VOLTAGE (VOLTS)
45
Figure 49. Output Capacitance
0
5
15
20
25
30
10
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
25°C
TA=-25°C
75°C
10
1
0.1
0
5
35
40
Figure 50. Output Current versus Input Voltage
100
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
100
10
20
15
25
IC, COLLECTOR CURRENT (mA)
30
Figure 51. Input Voltage versus Output Current
http://onsemi.com
15
35
MUN2211T1 Series
1000
1
VCE = 10 V
IC/IB = 10
75°C
TA=-25°C
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS - MUN2237T1
25°C
75°C
0.1
0.01
0
5
15
25
10
20
30
IC, COLLECTOR CURRENT (mA)
35
1
Figure 53. DC Current Gain
2
IC, COLLECTOR CURRENT (mA)
100
1.6
1.4
1.2
1
0.8
0.6
f = 1 MHz
lE = 0 V
TA = 25°C
75°C
TA=-25°C
10
25°C
1
0.1
0.01
VO = 5 V
0.001
0
5
10
15
20
25
30
35
40
VR, REVERSE BIAS VOLTAGE (VOLTS)
45
Figure 54. Output Capacitance
0
2
4
6
8
10
12
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
TA=-25°C
25°C
75°C
10
1
0
5
14
16
Figure 55. Output Current versus Input Voltage
100
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
1.8
0.2
0
100
10
IC, COLLECTOR CURRENT (mA)
Figure 52. VCE(sat) versus IC
0.4
25°C
10
1
40
TA=-25°C
100
10
20
30
15
25
IC, COLLECTOR CURRENT (mA)
35
Figure 56. Input Voltage versus Output Current
http://onsemi.com
16
40
MUN2211T1 Series
TYPICAL APPLICATIONS FOR NPN BRTs
+12 V
ISOLATED
LOAD
FROM mP OR
OTHER LOGIC
Figure 57. Level Shifter: Connects 12 or 24 Volt Circuits to Logic
+12 V
VCC
OUT
IN
LOAD
Figure 58. Open Collector Inverter:
Inverts the Input Signal
Figure 59. Inexpensive, Unregulated Current Source
http://onsemi.com
17
MUN2211T1 Series
PACKAGE DIMENSIONS
SC-59
CASE 318D-04
ISSUE G
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3
HE
2
E
DIM
A
A1
b
c
D
E
e
L
HE
1
b
e
C
A
MIN
0.039
0.001
0.014
0.003
0.106
0.051
0.067
0.008
0.099
INCHES
NOM
0.045
0.002
0.017
0.005
0.114
0.059
0.075
0.016
0.110
MAX
0.051
0.004
0.020
0.007
0.122
0.067
0.083
0.024
0.118
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
L
A1
MILLIMETERS
NOM
MAX
1.15
1.30
0.06
0.10
0.43
0.50
0.14
0.18
2.90
3.10
1.50
1.70
1.90
2.10
0.40
0.60
2.80
3.00
MIN
1.00
0.01
0.35
0.09
2.70
1.30
1.70
0.20
2.50
SOLDERING FOOTPRINT*
0.95
0.037
0.95
0.037
2.4
0.094
1.0
0.039
SCALE 10:1
mm Ǔ
ǒinches
0.8
0.031
*For additional information on our Pb-Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
http://onsemi.com
18
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MUN2211T1/D
Similar pages