CX1HGSM AT CRYSTAL 8 MHz to 250 MHz High Shock Miniature Surface Mount AT Quartz Crystal ™ Fundamental Mode: 8 MHz - 250 MHz Third Overtone Mode: 48 MHz - 160 MHz DESCRIPTION actual size STATEK’s miniature CX1HGSM AT crystals in leadless ceramic packages are designed for surface mounting on printed circuit boards or hybrid substrates. These rugged crystals are designed for applications requiring exceptional shock and vibration survival. side view XX SXX glass lid FEATURES ceramic lid High shock and vibration resistance Designed for surface mount applications using infrared, vapor phase, or epoxy mount techniques PACKAGE DIMENSIONS Low profile hermetically sealed ceramic package D Available with glass or ceramic lid Custom designs available Full military testing available A TOP BOTTOM Designed and manufactured in the USA E D APPLICATIONS Industrial E B Down-hole Data Recorder C Process Control Environmental Control Engine Control Telemetry TYPICAL MAXIMUM DIM inches mm inches mm Ruggedized Instrumentation A 0.315 8.00 0.330 8.38 Automotive Control B 0.140 3.56 0.155 3.94 Military & Aerospace C - - Smart Munitions D 0.045 1.14 0.055 1.40 E 0.060 1.52 0.070 1.78 Timing Devices (Fuzes) see below Surveillance Devices Missile Telemetry Ruggedized Communications THICKNESS (DIM C) MAXIMUM GLASS LID Aviation Equipment CERAMIC LID inches mm inches mm SM1 0.065 1.65 0.070 1.78 SM2/SM4 0.067 1.70 0.072 1.83 SM3/SM5 0.070 1.78 0.075 1.90 IS O RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de YS 90 01 ERT T E M C IFIC T A N IO S 10108 - Rev B Pb SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Fundamental Frequency 10 MHz 32 MHz 155.52 MHz Designation SM1 SM2 SM3 SM4 SM5 Motional Resistance R1 (Ω) 30 25 15 Motional Capacitance C1 (fF) 5.5 6.2 4.0 Quality Factor Q (k) 100 30 30 2.2 2.3 2.3 Shunt Capacitance C0 (pF) 1 Calibration Tolerance + _ 100 ppm, or tighter as required Termination Gold Plated (Lead Free) Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) 260OC for 20 sec. Max Process Temperature 20 pF for f ≤ 50 MHz Load Capacitance2 SUGGESTED LAND PATTERN 10 pF for f > 50 MHz 500 µW MAX for f ≤ 50 MHz Drive Level 0.070 (1.78) 200 µW MAX for f > 50 MHz Frequency-Temperature Stability1,3 Aging, first year4 + _ 50 ppm to + _ 10 ppm (Commercial) + _ 100 ppm to + _ 20 ppm (Industrial) + _ 100 ppm to + _ 30 ppm (Military) 10 ppm MAX 5 Shock, survival 0.160 (4.06) inches (mm) 0.270 (6.86) 10,000 g, 0.2 ms, 1/2 sine 6 Vibration, survival 50 g, 10-2,000 Hz swept sine O EQUIVALENT CIRCUIT O Operating Temp. Range -10 C to +70 C (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC. Max Process Temperature 260OC for 20 sec. C0 1 1. Other tolerances available. Contact factory. 2. Unless specified otherwise. 3. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 4. 10 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies contact factory. 5. Up to 100,000 g. Contact factory. 6. Per MIL-STD-202G, Method 204D, Condition E. Random vibration testing also available. L1 C1 R1 2 R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance PACKAGING OPTIONS • Tray Pack • 16mm tape, 7” or 13” reels Per EIA 481 (see Tape and Reel data sheet 10109) HOW TO ORDER CX1HGSM AT CRYSTALS CX1 “S” if special or custom design. Blank if Std. S HG O.T. = 3RD O.T. Mode Blank = Fundamental Mode C C = Ceramic Lid Blank = Glass Lid SM1 – 32.0M , Frequency M = MHz SM1 = Gold Plated (Lead Free) SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) 100 Calibration Tolerance @ 25OC (in ppm) / 100 / — / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified Frequency Stability over Temp. Range (in ppm) OR — — 200 Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 10108 - Rev B IS O RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de YS 90 01 ERT T E M C IFIC T A N IO S Total Frequency Tolerance (in ppm) I Pb