SAW Components SAW Duplexer LTE Band 17 Series/type: Ordering code: B8612 B39741B8612P810 Date: Version: April 16, 2014 2.2 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Application ■ Low-loss SAW duplexer for mobile telephone LTE Band 17 systems High attenuation High Isolation Low amplitude ripple Usable passband 12 MHz Single-ended to balanced transformation in Antenna-Rx path ■ Impedance transformation 50 Ω to 100 Ω in Antenna-Rx path ■ Very small size and low height ■ ■ ■ ■ ■ 0.3 0.35 1 0.7 Package size 1.8 * 1.4 mm2 Package height: maximum 0.475mm RoHS compatible Package for Surface Mount Technology (SMT) Ni, Au-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitivity Level 3 2 3 4 8 7 0.475 max. ■ ■ ■ ■ ■ ■ ■ 6 5 0.25 0.25 Features bottom view side view 1.8 1.4 7 4 Pin configuration 3 1, 8 6 2, 4, 5, 7 Tx input Rx output (balanced) Antenna To be grounded Please read cautions and warnings and important notes at the end of this document. 2 5 8 1 ■ ■ ■ ■ 6 April 16, 2014 2 3 top view SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –20 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 15 nH ZRx = 100 Ω (balanced) B8612 Characteristics Tx-Antenna min. Center frequency fc max. - typ. @ 25 ˚C 710 - 1.4 2.2 dB - MHz α Maximum insertion attenuation 704.0 ... 716.0 MHz Amplitude ripple (p-p) 704.0 ... 716.0 MHz - 0.4 1.3 dB Error Vector Magnitude @ fCarrier 706.4 ... 712.0 - 0.9 3.0 % - 1.2 3.5 % ∆α ... 713.6 MHz EVM1) MHz EVM1) Input VSWR (Tx port) 704.0 ... 716.0 MHz - 1.4 2.0 Output VSWR (Ant Port) 704.0 ... 716.0 MHz - 1.4 2.0 Third Harmonic at 2130MHz - -80 - @ fCarrier 712.0 Harmonic Level CW tone at 710MHz 2) 1) 2) Error Vector Magnitude (EVM) based on definition in 3GPP TS 25.141 Power level: +27dBm on Tx port Please read cautions and warnings and important notes at the end of this document. 3 April 16, 2014 dBm SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = -20 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 15 nH ZRx = 100 Ω (balanced) B8612 Characteristics Tx-Antenna Absolute attenuation 10.0 692.0 722.0 728.0 734.0 746.0 768.0 869.0 1408.0 1565.0 1805.0 1930.0 2110.0 2155.0 2400.0 2816.0 min. typ. @ 25 ˚C max. 30 2.5 2.5 20 45 35 35 35 40 43 45 45 48 48 50 45 43 7 10 29 55 44 42 46 46 48 51 53 55 55 61 55 - α ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 692.0 698.0 728.0 734.0 746.0 768.0 805.0 894.0 1432.0 1607.0 1880.0 1990.0 2155.0 2170.0 2497.0 2864.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 4 April 16, 2014 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –20˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 15nH ZRx = 100 Ω (balanced) B8612 Characteristics Antenna-Rx Center frequency fc max. - 740 - - 1.6 2.3 dB dB MHz ... 746.0 MHz ... 746.0 MHz - 0.3 1.0 ... 746.0 MHz - 1.3 2.0 ... 746.0 MHz - 1.3 2.0 746.0 MHz 30 34 - dB 35 50 35 50 40 20 13 7 35 40 40 38 35 64 62 62 62 48 27 21 16 39 53 50 47 44 - dB dB dB dB dB dB dB dB dB dB dB dB dB ∆α Amplitude ripple (p-p) 734.0 typ. @ 25 ˚C α Maximum insertion attenuation 734.0 min. Input VSWR (Ant port) 734.0 Output VSWR (Rx Port) 734.0 Common mode rejection ratio 734.0 ... α Absolute attenuation 10.0 674.0 686.0 704.0 716.0 722.0 725.0 727.0 777.0 793.0 805.0 3300.0 4500.0 ... 674.0 ... 686.0 ... 704.0 ... 716.0 ... 722.0 ... 725.0 ... 727.0 ... 728.0 ... 793.0 ... 805.0 ... 3300.0 ... 4500.0 ... 6000.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 5 April 16, 2014 SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = -20 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 15nH ZRx = 100 Ω (balanced) B8612 Characteristics Tx-Rx min. typ. @ 25 ˚C max. 58 58 55 52 30 30 30 64 70 61 56 69 62 59 - dB dB dB dB dB dB dB 52 57 - dB α Differential mode isolation 704.0 ... 716.0 734.0 ... 738.0 738.0 ... 742.0 742.0 ... 746.0 1408.0 ... 1432.0 2112.0 ... 2148.0 2816.0 ... 2864.0 MHz MHz MHz MHz MHz MHz MHz Common mode isolation 704.0 ... MHz α 716.0 Maximum Ratings Storage temperature range DC voltage ESD voltage Input power at Tx Port 704.0 ...716.0 MHz elsewhere 1) Tstg VDC VESD Pin Pin –40/+85 5 1001) 29 10 ˚C V V dBm dBm machine model, 1 pulse } continuous wave 55 ˚C, 5000h According to JESD22-A115A (machine model), 1 negative and 1 positive pulses. Please read cautions and warnings and important notes at the end of this document. 6 April 16, 2014 SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Frequency Response TX-ANT Narrow Band Frequency Response TX-ANT Bandwidth Please read cautions and warnings and important notes at the end of this document. 7 April 16, 2014 SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Frequency Response ANT-RX Narrow Band Frequency Response ANT-RX Bandwidth Please read cautions and warnings and important notes at the end of this document. 8 April 16, 2014 SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Frequency Response ANT-TX Wide Band Frequency Response ANT-RX Wide Band Please read cautions and warnings and important notes at the end of this document. 9 April 16, 2014 SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data Frequency Response TX-RX : Differential mode isolation Frequency Response TX-RX : Common mode isolation Please read cautions and warnings and important notes at the end of this document. 10 April 16, 2014 SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data S11 VSWR (TX) S22 VSWR (ANT) S33 VSWR (RX) Please read cautions and warnings and important notes at the end of this document. 11 April 16, 2014 SAW Components B8612 SAW Duplexer 710.0 / 740.0 MHz Preliminary data References Type B8612 Ordering code B39741B8612P810 Marking and package C61157-A8-A57 Packaging F61074-V8259-Z000 Date codes L_1126 S-parameters B8612_NB.s4p B8612_WB.s4p Soldering profile S_6001 RoHS compatible Defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Matching coils See http://www.tdk.co.jp/tefe02/coil.htm#aname1 http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 12 April 16, 2014 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 13 April 16, 2014