LED-25W Series– Fixed Output and Dimmable Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <15.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.25 Amps max @ 120 Vac Maximum Power: 25W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: < _ 20% @ full load Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Protection: utput Over-Voltage, Output Over-Current, and O Output Short Circuit Protection with Auto Recovery • Total Power: 25 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • High Power Factor • UL8750 and Class 2 Compliant, as noted • UL Sign Components Manual (S.A.M. Models) Environmental Specifications Minimum Starting Temp: -30ºC Maximum Case Temp. 90°C Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% Cooling: Convection Vibration Frequency: 5 to 55 Hz/2g, 30 minutes Sound Rating: Class A LED25W-56-C0450-XX 450 19-56 25 84% MTBF: 82,000 Hours at full load and 40ºC ambient conditions 4 per MIL-217F Notice 2 LED25W-40-C0500-XX 500 13-40 20 84% LED25W-40-C0620-XX 620 13-40 24.8 84% EMC: FCC 47CFR Part 15 Class B compliant LED25W-36-C0700-XX 700 12-36 25 84% Constant Current Output Current Output Voltage Max. Output Typical (mA ±3%) Range (Vdc) Power (W) Efficiency Model Number LED25W-72-C0350-XX 350 24-72 25 86% LED25W-40-C0350-XX 350 13-40 14 84% LED25W-28-C0350-XX 350 10-28 9.8 83% LED25W-62-C0400-XX 400 21-62 24.8 85% LED25W-28-C0850-XX 850 10-28 23.8 83% LED25W-24-C1040-XX 1040 8-24 25 83% LED25W-20-C1250-XX 1250 7-20 25 83% LED25W-18-C1400-XX 1400 6-18 25 82% LED25W-16-C1560-XX 1560 6-16 25 82% LED25W-14-C1750-XX 1750 5-14 24.5 82% LED25W-12-C2080-XX 2080 4-12 25 81% -XX indicates dimming options are available. See options at left. Blank = fixed current output Ordering Options: -D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on the output side. “-D” 0-10V Dimming is compatible with most quality 0-10V wall dimmers. See page 3 for additional specifications. -PD:PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output side. “-PD” version is PWM Dimmable via a positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications. Constant Voltage Model Number LED25W-12 LED25W-14 E332160 Max. Output Power (W) Typical Efficiency 12 520-2080 25 81% 14 438-1750 24.5 82% LED25W-16 16 390-1560 25 82% LED25W-18 18 360-1400 25 82% 20 313-1250 25 83% 24 28 36 260-1040 213-850 175-700 25 23.8 25 83% 83% 84% LED25W-40 40 155-620 24.8 84% LED25W-56 56 113-450 25 84% LED25W-62 62 100-400 24.8 85% LED25W-72 72 88-350 25 86% LED25W-20 Sign Components Manual • Output Voltage Output Current (Vdc ±5%) Range (mA) LED25W-24 LED25W-28 LED25W-36 • • Indicates S.A.M. Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. Class 2: US/Canada US Only Rev 9-11-15 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED25W Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 4 Dimensions - IN [mm] Dimming Purple (+) Gray (-) Output Red (+) Blue (-) Tc = 90°C max Input White (N) Black (L) WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. Dimming Leads: 22 AWG, rated 300 V, 105C. All wires are stranded with solder dipped ends. Power Factor / Load 1.00 0.90 18% 0.80 16% 0.70 0.50 10% 0.40 6% 0.20 4% 0.10 2% 0.00 50% 60% 70% 80% Load 90% 0% 50% 100% Typical Efficiency / Load 130 60% 70% 80% Load Lifetime (kHrs) 90% 85% 80% 90% Lifetime / Case Temperature 100% Safety and EMC Compliance UL/CUL CE FCC, 47CFR Part 15 EN61000-3-2 EN61000-3-3 EN61000-4-5 115 120Vac 277Vac 95% Efficiency 8% 0.30 90 75 60 45 UL8750, CSA-C22.2 EN 61347 Class B Class C 2kV 30 75% 70% 60% 120Vac 277Vac 12% THD PF 14% 120Vac 277Vac 0.60 100% THD / Load 20% 15 70% 80% 90% Normalized Output Voltage 100% UL Conditions of Acceptability See website for additional information 0 45 50 55 60 65 70 75 80 85 Case Hotspot Temperature (°C) 90 Note: Life calculations are based on reliability with confidence using a 90% confidence level and <5% failure rate. At a confidence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (Failure is defined as a driver drifting outside specification, rather than fail to operate) Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED25W Series SSL Solutions Faster Than The Speed Of Light® Pg 3 of 4 “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum 0 mA -2.0 V — — 2 mA +15 V Source Current out of 0-10V Purple Wire Absolute Voltage Range on 0-10V (+) Purple Wire Typical Dimming Circuit Dim(+) Purple LED25W-XX-CXXXX-D IP710 Wall Dimmer Dim(-) Gray (Dimmer must be current-sink type control) Output Current / 0-10VDC Dimming Control Voltage Output Current % 100 90 80 70 60 50 40 30 20 10 0 0V 1V 2V 3V 4V 5V 6V 7V Purple-to-Gray Voltage (Vdc) 8V 9V 10V Notes: 1. 2. 3. 4. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED25W Series SSL Solutions Faster Than The Speed Of Light® Pg 4 of 4 “-PD” Option: PWM Dimming Parameters Absolute Maximum Voltage Range on PWM Input (Purple Wire) Input LOW Level Voltage Range (Purple Wire) Input HIGH Level Voltage Range (Purple Wire) Sink Current into PWM Input (Purple Wire) PWM Input Signal Frequency PWM Input Signal Positive Duty Cycle Minimum Typical Maximum -2.0V -2.0 +9.0 0mA 200Hz 0% 10V 0V 10V ——10-90% +28V +7.5V 28V 1.2mA 1000Hz 100% PWM Positive Dimming Typical Circuit PWM (+) Purple LED25W-XX-CXXXX-PD PWM In PWM (-) Gray Output Current / Positive Duty Cycle Output Current % 100 90 80 70 60 50 40 30 20 10 0 0% 10% 20% 30% 40% 50% 60% Positive Duty Cycle 70% 80% 90% 100% Notes: 1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side. 2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle. 3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com