UNISONIC TECHNOLOGIES CO., M62364 CMOS IC 8-BIT 8-CH MULTIPLYING D-A CONVERTER WITH BUFFER AMPLIFIERS SSOP-24 (209mil) DESCRIPTION The UTC M62364 is a CMOS 8-bit, 8-ch D/A converter having a multiplying function and output buffer amplifiers. It has a serial data input and can easily communicate with a microcontroller by the simple three-wiring method (DIN, CLK, LD). The output buffer amplifiers operating in AB-class has both sinking and driving capabilities of 1.0mA or more and can operate in a whole supply range from VDD to GND. The IC is suitable for a use in automatic adjustment applications in conjunction with a MCU by utilizing the terminal Do for a cascading connection. SOP-24 FEATURES *Three-wiring serial data transmission *Doubled precision 8-ch D/A converter employing an R-2R with higher-order segment method *8 buffer amplifiers operating in a whole supply voltage range from VDD to GND *4-quadrant multiplication ORDERING INFORMATION Ordering Number Lead Free Halogen Free M62364L-R24-R M62364G-R24-R M62364L-R24-T M62364G-R24-T M62364L-S24-R M62364G-S24-R M62364L-S24-T M62364G-S24-T www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Package Packing SSOP-24 SSOP-24 SOP-24 SOP-24 Tape Reel Tube Tape Reel Tube 1 of 8 QW-R502-008.B M62364 CMOS IC PIN CONFIGURATION (TOP VIEW) VIN1 VOUT1 1 2 3 4 VOUT2 VIN2 VDD LD CLK DIN VIN3 VOUT3 5 6 7 8 9 10 11 VOUT4 VIN4 12 24 23 22 21 20 VIN8 VOUT8 VOUT7 VIN7 GND 19 18 17 16 RESET VDA(REF) DOUT VIN6 15 VOUT6 14 VOUT5 VIN5 13 EXPLANATION OF TERMINALS PIN NO 8 17 SYMBOL DIN DOUT 7 CLK 6 LD 19 RESET VOUT1 VOUT2 VOUT3 VOUT4 VOUT5 VOUT6 VOUT7 VOUT8 VDD GND VIN1 VIN2 VIN3 VIN4 VIN5 VIN6 VIN7 VIN8 VDA(REF) 2 3 10 11 14 15 22 23 5 20 1 4 9 12 13 16 21 24 18 FUNCTION Serial data input Serial data output Shift clock input. Input data of DIN are taken into the 12-bit shift register on a rising edge of the clock A low state enables data loading to the 12-bit shift register. During a rising edge of LD, the data will be loaded to the output register Reset 8-bit latches D/A Converter Output with8-bit resolution Power Supply Ground D/A Converter Input D/A Converter Reference Voltage Input UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 8 QW-R502-008.B M62364 CMOS IC BLOCK DIAGRAM VDD 5 12-bit 12 SHIFT REGISTER bit SHIFT REGISTER DIN 8 D0D0 D1 CLK 7 D23 D3 D3 D4 D4 D D5 D D6 D7 D D D8 17 DOUT D9D 10 D10 11 D11 6 LD ADDRESS DECODER RESET 19 8-bit Latch 8-bit Latch D-A CONVERTER D-A CONVERTER 18 VDA(REF) - + - + 1 2 24 23 20 VIN1 VOUT1 VIN8 VOUT8 GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 8 QW-R502-008.B M62364 ABSOLUTE MAXIMUM RATING PARAMETER Supply Voltage Digital Input Voltage Analog Input Voltage Analog Output Voltage D-A Reference Voltage Operating Temperature Storage Temperature CMOS IC SYMBOL VDD VIND VIN VOUT VDA(REF) TOPR TSTG RATINGS -0.3 ~ +7.0 -0.3 ~ +7.0 -0.3 ~ VDD+0.3 -0.3 ~ VDD+0.3 -0.3 ~ VDD+0.3 -20 ~ +75 -40 ~ +125 UNIT V V V V V °C °C ELECTRICAL CHARACTERISTICS (VDD=5V±10%, VDD≥VIN, GND, VDA(REF) =0V, TA= -20 ~ 85°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDUCTION MIN ANA/DIG COMMON PART Supply Voltage VDD 2.7 Supply Current IDD CLK=1MHz, VCC=3V, IAO=0μA Digital Part Digital Input “Low” Voltage IIL Digital Input “High” Voltage IIH 0.8VDD DOUT Terminal Output “Low” Voltage VOL IOL=2.5mA DOUT Terminal Output “High” Voltage VOH IOH= -400μA VDD-0.4 Input Leak Current IILK VIN=0 ~VDD -10 ANALOG PART 0.1 IAO= ±100μA Buffer Amplifier Output Voltage Range VAO IAO= ±500μA 0.2 VIN=3V, VDA(REF) =0V, * Proportional to max. input Input Current IIN current condition (VIN- VDA(REF)) and digital data of each channels. VIN=3V, VDA(REF) =0V, * Proportional to max. input -1.44 D-A Reference Input Current IDA(REF) current condition (VIN - VDA(REF)) and digital data of each channels Upper Saturation Voltage=0.4V -1 Buffer Amplifier Output Current Range IAO Lower Saturation Voltage=0.4V Buffer Amplifier Output Impedance RO Resolution RES VDD=2.61V,VDA(REF) =0.050V Differential Nonlinearity DNL (10mV/1LSB) -1 Without Load(I = ±0) Nonlinearity NL -1.5 AO Output Capacitative Load CO UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP MAX UNIT 3.0 3.6 3.5 V mA 0.2 VDD V V V V μA 0.4 10 VCC-0.1 VCC-0.2 V 0.18 mA mA 1 mA 1 1.5 0.1 Ω bit LSB LSB μF 5 8 4 of 8 QW-R502-008.B M62364 CMOS IC ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER AC CHARACTERISTICS Clock “L” Pulse Width Clock “H” Pulse Width Clock Rise Time Clock Fall Time Data Set Up Time Data Hold Time LD Set Up Time LD Hold Time LD “H” Pulse Duration Time Data Output Delay Time D-A Output Setting Time SYMBOL tCKL tCKH tCR tCF tDCH tCHD tCHL tLDC tLDH tDOUT tLDD TEST CONDUCTION TYP MAX 200 200 CL=100pF CL≤100pF,VAO : 0.1<=>2.6V This Time Until The Output Becomes The final Value Of 1/2 LSB UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 60 100 200 100 100 70 UNIT ns ns 200 ns 350 ns ns ns ns ns ns 300 μs 5 of 8 QW-R502-008.B M62364 CMOS IC DIGITAL FORMAT ( LSB ) DATA 1 2 3 4 5 6 7 8 9 10 11 12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 D0 D1 D2 D3 D4 D5 D6 D7 CLK ( MSB ) ( LSB ) D8 : DAC DATA D9 D11 D10 : DAC SELECT DATA Dac Select Data D8 D9 D10 D11 Dac Selection 0 0 0 0 Don't Care 0 0 0 1 VOUT1 Selection 0 0 1 0 VOUT2 Selection 0 0 1 1 VOUT3 Selection 0 1 0 0 VOUT4 Selection 0 1 0 1 VOUT5 Selection 0 1 1 0 VOUT6 Selection 0 1 1 1 VOUT7 Selection 1 0 0 0 1 0 0 1 Don't Care 1 0 1 0 Don't Care 1 0 1 1 Don't Care 1 1 0 0 Don't Care 1 1 0 1 Don't Care 1 1 1 0 Don't Care 1 1 1 1 Don't Care VOUT8 Selection UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 8 QW-R502-008.B M62364 DIGITAL FORMAT(Cont.) TIMING CHART UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw CMOS IC 7 of 8 QW-R502-008.B M62364 CMOS IC TIMING CHART(Cont.) tCF tCKH tCR CLK tCKL tLDC DIN tLDH tDCH tCHD tCHL LD tLDD D - A OUTPUT tDo DOUT OUTPUT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 8 QW-R502-008.B