Type AVES –55 °C to +105 °C Low Profile SMT Aluminum Electrolytic Capacitors For Filtering, Bypassing and Power Supply Decoupling Type AVES Capacitors are rated for 1000 hours at 105 ºC with low impedance characteristics. They are ideal for high density PC board packaging. The Type AVES ofers a low in-place-cost for a high quality performer. The vertical cylindrical cases facilitate automatic mounting and refow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Type AVES is RoHS compliant. Highlights • +105 °C, Up to 1000 Hours Load Life • Capacitance Range: 0.1 µF to 100 µF • Voltage Range: 6.3 Vdc to 50 Vdc Specifcations Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current: Ripple Current Multiplier: Dissipation Factor: (Tan d at 120 Hz, 20 ºC) Low Temperature Characteristic (at 120 Hz): Load Life Test: Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). –55 °C to +105 °C 6.3, 10, 16, 25, 35, 50 Vdc 0.1µF to 100 µF ±20% @ 120 Hz and +20 °C I = 0.01 CV or 3 (µA) whichever is greater after 2 minutes C = rated capacitance in µF, V = rated DC working voltage Vdc Freq. (Hz) 50, 60 120 1k 10 k up Under 16 0.8 1.00 1.15 1.25 25 ~ 35 0.8 1.00 1.25 1.40 50 0.8 1.00 1.35 1.50 Rated Voltage 6.3 10 16 25 35 50 Tan δ Max 0.30 0.26 0.22 0.16 0.13 0.12 Rated Voltage Impedance Ratio 6.3 10 16 25 35 50 Z(–25 ºC) / Z(+20 ºC) 4 3 2 2 2 2 Z(–40 ºC) / Z(+20 ºC) 8 5 4 3 3 3 Test Time 1,000 Hours Capacitance Change Within ±20% of initial value Dissipation Factor Less than 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 1,000 hrs at 105 ºC Shelf LifeTest: Test time: 1000 hours; other items are the same as those for life test. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVES –55 °C to +105 °C Low Profile SMT Aluminum Electrolytic Capacitors Outline Drawing, Case Code & Dimensions Table ØD ± 0.5 - B ± 0.2 + L A ± 0.2 0.4 ±0.2 0.3 Max Case Ø D L Code (mm) (mm) W C ±0.2 P C ±0.2 A B C (mm) (mm) (mm) W P ±0.2 (mm) (mm) B 4.0 5.3 ±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 C 5.0 5.3 ±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 D 6.3 5.3 ±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 Part Numbering System AVES 106 Series Capacitance AVES M 16 B 12T –F Packaging RoHS Capacitance Voltage Case 104 = 0.1 µF Tolerance 06 = 6.3 Vdc Code 105 = 1.0 µF M = ±20% 10 = 10 Vdc B=B 106 = 10.0 µF 16 = 16 Vdc 107 = 100.0 µF 25 = 25 Vdc 108 = 1000.0 µF 50 = 50 Vdc Information Compliant 12 = Carrier Tape Width (mm) T = Tape & Reel Ratings Catalog Part Number Max DCL 2 min. (µA) Max DF 120 Hz 20 ºC Max Ripple Current 120 Hz 105 °C (mA) Case Code Size DxL (mm) Quantity per Reel (each) 22 33 47 100 AVES226M06B12T-F AVES336M06C12T-F AVES476M06C12T-F AVES107M06D16T-F 3.0 3.0 3.0 6.3 0.30 0.30 0.30 0.30 21 30 46 61 B C C D 4 x 5.3 5 x 5.3 5 x 5.3 6.3 x 5.3 2000 1000 1000 1000 10 22 33 47 100 AVES106M10B12T-F AVES226M10C12T-F AVES336M10C12T-F AVES476M10D16T-F AVES107M10D16T-F 3.0 3.0 3.3 4.7 10.0 0.26 0.26 0.26 0.26 0.26 15 25 31 43 65 B C C D D 4 x 5.3 5 x 5.3 5 x 5.3 6.3 x 5.3 6.3 x 5.3 2000 1000 1000 1000 1000 Cap (µF) Max ESR 120 Hz 20 ºC (ohms) 6.3 Vdc ( 8 Vdc Surge) 22.6 15.1 10.6 5.0 10 Vdc ( 13 Vdc Surge) 43.1 19.6 13.1 9.2 4.3 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVES –55 °C to +105 °C Low Profile SMT Aluminum Electrolytic Capacitors Catalog Part Number Max DCL 2 min. (µA) 10 22 33 47 100 AVES106M16B12T-F AVES226M16C12T-F AVES336M16D16T-F AVES476M16D16T-F AVES107M16D16T-F 3.0 3.5 5.3 7.5 16.0 4.7 10 22 33 47 AVES475M25B12T-F AVES106M25C12T-F AVES226M25D16T-F AVES336M25D16T-F AVES476M25D16T-F 3.0 3.0 5.5 8.3 11.8 4.7 AVES475M35B12T-F 3.0 10.0 22.0 AVES106M35C12T-F AVES226M35D16T-F 3.5 7.7 .10 .22 .33 .47 1.0 2.2 3.3 4.7 10.0 22.0 AVES104M50B12T-F* AVES224M50B12T-F* AVES334M50B12T-F* AVES474M50B12T-F* AVES105M50B12T-F AVES225M50B12T-F AVES335M50B12T-F AVES475M50C12T-F AVES106M50D16T-F AVES226M50D16T-F 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 11.0 Cap (µF) Max DF 120 Hz 20 ºC Max ESR 120 Hz 20 ºC ( ohms ) 16 Vdc ( 20 Vdc Surge) 0.22 36.5 0.22 16.6 0.22 11.1 0.22 7.8 0.22 3.6 25 Vdc (31 Vdc Surge) 0.16 56.4 0.16 26.5 0.16 12.1 0.16 8.0 0.16 5.6 35 Vdc (44 Vdc Surge) 0.13 45.9 0.13 21.6 0.13 9.8 50 Vdc (63 Vdc Surge) 0.12 1989.4 0.12 904.3 0.12 602.8 0.12 423.3 0.12 198.9 0.12 90.4 0.12 60.3 0.12 42.3 0.12 19.9 0.12 9.0 Max Ripple Current 120 Hz 105 °C (mA) Size DxL (mm) Quantity per Reel (each) 16 28 40 47 70 4 x 5.3 5 x 5.3 6.3 x 5.3 6.3 x 5.3 6.3 x 5.3 2000 1000 1000 1000 1000 12 21 36 44 60 4 x 5.3 5 x 5.3 6.3 x 5.3 6.3 x 5.3 6.3 x 5.3 2000 1000 1000 1000 1000 14 4 x 5.3 2000 23 50 5 x 5.3 6.3 x 5.3 1000 1000 2 3 4 5 7 10 12 17 26 51 4 x 5.3 4 x 5.3 4 x 5.3 4 x 5.3 4 x 5.3 4 x 5.3 4 x 5.3 5 x 5.3 6.3 x 5.3 6.3 x 5.3 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 *denotes discontinured part number CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVES –55 °C to +105 °C Low Profile SMT Aluminum Electrolytic Capacitors Recommended Land Patterns by case size for AVES series B A B C Case Code B C D Case Size 4x5.3 5x5.3 6.3x5.3 Land Dimensions (mm) C B A 1.6 2.6 1 1.6 3 1.4 1.6 3.5 1.9 Recommended Soldering Methods Recommended Reflow Soldering Profile: Parts should be subjected to just one reflow soldering process. Soldering with a solder iron should be performed with a maximum soldering iron tip temperature of 350±5°C for 3 to 4 seconds. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVES –55 °C to +105 °C Low Profile SMT Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifcations, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confrming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specifed by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com