LUXEON Rebel and LUXEON Rebel ES Color Portfolio Introduction With leading light output, color stability, flux density, and clear saturated colors, the LUXEON Rebel and LUXEON Rebel ES emitters are ideal for a wide variety of lighting, signaling, signage and entertainment applications. Every LUXEON Rebel and LUXEON Rebel ES emitter has built-in quality, reliability, lumen maintenance and the ease of manufacturing needed to create a superior high quality light. Using the information in this document you can begin designing applications to your unique specifications. Features and Benefits Key Applications • Deliver more usable light and higher flux density • Architecture • Optimize applications to reduce size and cost -- Entertainment • Tightly pack the LEDs for color mixing -- Studio • Engineer more robust applications • Utilize standard FR4 PCB technology • Simplify manufacturing through the use of surface mount technology • Recognized under the Component Recognition Program of Underwriters Laboratories Inc. UL listing E327436. LUXEON Rebel Color Portfolio DS68 ©2014 Philips Lumileds Lighting Company. • Lamps -- Remote Phosphor • Specialty -- Emergency Vehicle Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection & Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Flux Performance, Binning, and Supportability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pad Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Typical Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Typical Relative Luminous Flux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Typical Chromaticity Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Radiometric Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Color Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. i General Information Product Nomenclature LUXEON Rebel ES Lime is tested at 350 mA/85°C. LUXEON Rebel ES Royal Blue and Blue are tested at 700 mA/25°C. All other LUXEON Rebel Color emitters are tested at 350 mA/25°C. The part number designation is explained as follows: LXML-ABCD-EFGH LXM2-ABCD-EFGH LXM3-ABCD-EFGH Where: A — designates radiation pattern (value P for lambertian) B — designates color (see LUXEON Rebel color binning and labeling section) C — designates color variant (0 for color variants) D — designates diode size (1 for 1mm2 ; 2 for 2mm2) EFGH — minimum luminous flux (lm) or radiometric power (mW) performance LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 2 Average Lumen Maintenance Characteristics LUXEON Rebel color emitters are tested and binned at 350 mA and LUXEON Rebel ES color emitters at 700 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at constant temperature are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and thermal pad temperature are the same. Philips Lumileds projects that green, cyan, blue and all royal blue LUXEON Rebel color products will deliver, on average, 70% lumen maintenance (B50, L70) at 50,000 hours of operation at a forward current of 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. Red, red-orange and amber LUXEON Rebel color products will also deliver, on average, 70% lumen maintenance (B50, L70) at 50,000 hours of operation at a forward current of 350 mA and is based on constant current operation with junction temperature maintained at or below 110°C. LUXEON Rebel PC amber delivers, on average, 70% lumen maintenance (L70) at 50,000 hours of operation at a forward current of up to 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 130°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal LUXEON Rebel reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel and LUXEON Rebel ES color products are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely REACH and the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel Color Portfolio: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 3 Product Selection & Optical Characteristics Product Selection Guide for LUXEON Rebel and LUXEON Rebel ES Colors at Junction Temperature [3] Table 1. Performance @ 350 mA Color Part Number Minimum Typical Luminous Luminous Flux (lm) Flux (lm) or or Radiometric Radiometric Power Power (mW) (mW) Performance @ 700 mA Typical Efficacy (lm/W) or Radiant Efficacy Minimum Typical Luminous Luminous Flux (lm) Flux (lm) or or Radiometric Radiometric Power Power (mW) (mW) Typical Efficacy (lm/W) or Radiant Efficacy Lime LXML-PX02-0000 140 150 160 170 180 Green LXML-PM01-0100 LXML-PM01-0090 LXML-PM01-0080 LXML-PM01-0070 100 90 80 70 102 95 88 79 100 93 86 78 – – – – 161 150 139 125 68 63 58 52 Cyan LXML-PE01-0080 LXML-PE01-0070 LXML-PE01-0060 80 70 60 83 76 67 81 75 66 – – – 133 122 110 56 51 46 LXML-PB01-0040 LXML-PB01-0030 LXML-PB01-0023 LXML-PB01-0018 40.0 30.0 23.5 18.1 41 35 28 22 38 33 26 21 70 58 48 38 29 24 20 16 – – – – – – – – – – – – – – – – 50 60 70 80 58 67 75 83 28 32 36 40 Royal Blue LXML-PR01-0500 LXML-PR01-0425 LXML-PR02-1100 LXML-PR02-1050 LXML-PR02-1000 LXML-PR02-0950 LXML-PR02-0900 LXML-PR02-0800 LXML-PR02-A900 [1] 500 mW 425 mW – – – – – – – 520 mW 480 mW – – – – – – – 48% 44% – – – – – – – 1100 mW 1050 mW 1000 mW 950 mW 900 mW 800 mW 900 mW 910 mW 840 mW 1120 mW 1070 mW 1030 mW 970 mW 940 mW 890 mW 1030 mW 40% 37% 53% 51% 49% 46% 44% 42% 49% Deep Red LXM3-PD01 350 mW 300 mW 260 mW 360 mW 320 mW 290 mW 46% 41% 37% – – – 720 mW 640 mW 580 mW 42% 38% 34% Red LXM2-PD01-0060 LXM2-PD01-0050 LXM2-PD01-0040 LXML-PD01-0050 LXML-PD01-0040 LXML-PD01-0030 60 50 40 50 40 30 62 53 48 52 46 38 83 75 65 53 47 37 – – – – – – 119 106 90 85 75 62 74 65 56 35 30 24 Red-Orange LXM2-PH01-0070 LXM2-PH01-0060 LXML-PH01-0060 LXML-PH01-0050 70 60 60 50 72 67 62 56 98 91 63 57 – – – – 134 122 100 90 83 76 40 35 PC Amber LXM2-PL01-0000 110 100 90 80 70 112 102 95 86 78 105 96 89 80 73 – – – – – 198 184 171 155 140 96 83 76 70 63 Amber LXML-PL01-0060 LXML-PL01-0050 LXML-PL01-0040 LXML-PL01-0030 60 50 40 30 61 54 48 38 60 51 46 37 – – – – 98 84 77 61 39 33 30 24 Blue LXML-PB02 148 157 167 174 183 154 163 174 181 190 – – – – – 278 295 313 327 344 142 151 160 167 176 Notes for Table 1: 1. LXML-PR02-A900 is a selection of color Bins 4,5 only. 2. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power measurements. 3. LUXEON Rebel ES Lime is tested and binned at thermal pad temperature = 85°C, all other LUXEON Rebel Color emitters are tested and binned with thermal pad temperature = 25°C. 4. LUXEON Rebel ES Lime, ES Blue, Deep Red and PC Amber may also be sold under part numbers which denote a minimum flux level, similar to other parts in the portfolio, specified by digits 9 through 12 of the part number. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 4 Flux Performance, Binning, and Supportability LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of flux performance that is approximately Gaussian in nature. In order to provide customers with fine granularity within the overall flux distribution, Philips Lumileds separates LEDs into fixed, easy to design with, minimum luminous flux bins. To verify supportability of parts chosen for your application design, Volume please consult your Philips Lumileds sales representative. Luminous Flux Bins Optical Characteristics LUXEON Rebel and LUXEON Rebel ES Colors at 350 mA or 700 mA, Test Temperature [1] Table 2. Dominant Wavelength [2] lD , or Peak Wavelength [3] lP Color Minimum Lime Typical Maximum Typical Spectral Half-width [5] (nm) Dl1/2 Typical Temperature Typical Total Coefficient Included Angle [5] of Dominant or Peak (degrees) Wavelength (nm/°C) u0.90V DlD / DTJ Typical Viewing Angle [6] (degrees) 2u 1/2 566.0 nm 567.5 nm 569.0 nm 100 0.01 160 125 Green [7] 520.0 nm 530.0 nm 540.0 nm 30 0.05 160 125 Cyan [7] 490.0 nm 505.0 nm 515.0 nm 30 0.04 160 125 Blue [7] 460.0 nm 470.0 nm 485.0 nm 20 0.05 160 125 Royal Blue [3] [7] 440.0 nm 447.5 nm 460.0 nm 20 0.04 160 125 Red [7] [9] 620.0 nm 627.0 nm 645.0 nm 20 0.05 160 125 Deep Red [3] [8] 650.0 nm 655.0 nm 670.0 nm 20 0.05 160 125 Red-Orange [8] 610.0 nm 617.0 nm 620.0 nm 20 0.08 160 125 584.5 nm 590.0 nm 594.5 nm 20 0.10 160 125 587.8 nm 591.0 nm 592.0 nm 80 -0.01 160 120 [8] Amber [8] PC Amber [7] [9] Notes for Table 2: 1. LXML-PR02-xxxx and LXML-PB02-xxxx emitters are tested and binned at 700 mA, all other LUXEON Rebel Color emitters are tested at 350 mA. 2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements. 3. Royal blue and deep red LEDs are binned by peak wavelength. Philips Lumileds maintains a tolerance of ± 2 nm for peak wavelength measurements. 4. Spectral width at ½ of the peak intensity. 5. Total angle at which 90% of total luminous flux or radiometric power is captured. 6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 7. Lime, PC Amber, green, cyan, blue and royal blue products are built with Indium Gallium Nitride (InGaN). 8. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP). 9. Lime and PC Amber are binned by chromaticity coordinates. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 5 Electrical Characteristics Electrical Characteristics for LUXEON Rebel and LUXEON Rebel ES Colors at Test Current and Temperature [1] Table 3. Color Forward Voltage Vf (V) Part Number Minimum Typical Maximum Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) Ru J-C Lime LXML-PX02 2.60 2.75 3.00 -2.0 to -4.0 6 Green LXML-PM01 2.55 2.90 3.51 - 2.0 to - 4.0 10 Cyan LXML-PE01 2.55 2.90 3.51 - 2.0 to - 4.0 10 Blue LXML-PB02 LXML-PB01 2.50 2.55 2.95 2.95 3.50 3.51 - 2.0 to - 4.0 - 2.0 to - 4.0 6 10 Royal Blue LXML-PR02 LXML-PR01 2.50 2.55 2.90 2.95 3.50 3.51 - 2.0 to - 4.0 - 2.0 to - 4.0 6 10 Red LXML-PD01 2.31 2.90 3.51 - 2.0 to - 4.0 12 8 Red LXM2-PD01 1.80 2.10 2.80 - 2.0 to - 4.0 Deep Red LXM3-PD01 1.80 2.10 2.80 - 2.0 to - 4.0 8 Red-Orange LXML-PH01 2.31 2.90 3.51 - 2.0 to - 4.0 12 Red-Orange LXM2-PH01 1.80 2.10 2.80 - 2.0 to - 4.0 8 PC Amber LXM2-PL01 2.55 3.05 3.51 - 2.0 to - 4.0 10 Amber LXML-PL01 2.31 2.90 3.51 - 2.0 to - 4.0 12 Notes for Table 3: 1. LUXEON Rebel ES Lime is tested at 350 mA/85°C. LUXEON Rebel ES Royal Blue and ES Blue are tested at 700 mA/25°C. All other LUXEON Rebel color emitters are tested at 350 mA/25°C. 2. Measured between Tj = 25°C and Tj = 110°C at test current. 3. Philips Lumileds maintains a tolerance of ± 0.06V on forward voltage measurements. Absolute Maximum Ratings Table 4. Parameter Green/Cyan/Blue/ Royal Blue ES Royal Blue/ES Blue/Lime Red/Deep Red Red-Orange/Amber PC Amber DC Forward Current (mA) 1000 1000 700 700 Peak Pulsed Forward Current (mA) 1000 1200 700 700 Average Forward Current (mA) 1000 1000 700 700 ESD Sensitivity < 8000V Human Body Model (HBM) Class 3A JESD22-A114-B LED Junction Temperature [1] 150°C 150°C 135°C Operating Case Temperature Storage Temperature 130°C -40°C - 135°C -40°C - 135°C -40°C - 120°C -40°C - 110°C -40°C - 135°C -40°C - 135°C -40°C - 135°C -40°C - 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 3 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) LUXEON Rebel Color Portfolio LEDs are not designed to be driven in reverse bias. Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. Pulsed operation of Rebel ES Colors with a peak drive current of 1200 mA is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50%. JEDEC Moisture Sensitivity Table 5. Level 1 Soak Requirements Floor Life Standard Time Conditions Time Conditions unlimited [ 30°C / 85% RH 168 Hrs. + 5 / -0 Hrs. 85°C / 85% RH LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 6 Reflow Soldering Characteristics Temperature Profile for Table 6. Table 6. Profile Feature Lead Free Assembly Average Ramp-Up Rate ( Tsmax to Tp ) 3°C / second max Preheat Temperature Min ( Tsmin ) 150°C Preheat Temperature Max ( Tsmax ) 200°C Preheat Time ( tsmin to tsmax ) 60 - 180 seconds Temperature TL ( tL ) 217°C Time Maintained Above Temperature TL ( tL ) 60 - 150 seconds Peak / Classification Temperature ( TP ) 260°C Time Within 5°C of Actual Peak Temperature ( tP ) 20 - 40 seconds Ramp-Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Note for Table 6: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 7 Mechanical Dimensions LUXEON Rebel Color 3.17 2.93 2.10 1.85 1.67 1.38 0.11 0.05 4.61 4.37 0.68 0.52 1.67 1.38 2.61 2.49 R 0.14 0.06 1.26 1.14 0.46 0.34 0.73 0.61 1.86 1.74 1.83 1.71 2.86 2.74 Figure 1. Package outline drawing. Notes for Figure 1: 1. To avoid damage, do not handle the device by the emitter lens. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The thermal pad is electrically isolated from the anode and cathode contact pads. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 8 Mechanical Dimensions LUXEON Rebel ES Color 2.10 1.85 3.17 2.93 0.11 0.05 1.67 1.38 2.31 2.25 1.67 1.38 0.86 0.74 0.83 0.54 0.84 0.72 ∅ 0.68 0.52 0.88 0.72 0.14 R 0.06 2.61 2.49 0.21 R 0.09 1.26 1.14 4.61 4.37 0.14 R 0.06 0.46 0.34 0.73 0.61 1.86 1.74 1.83 1.71 2.86 2.74 Figure 2. Package outline drawing. Notes for Figure 2: 1. To avoid damage, do not handle the device by the emitter lens. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The thermal pad is electrically isolated from the anode and cathode contact pads. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 9 Pad Configuration 3 1 3 2 TOP 2 1 BOTTOM PAD FUNCTION 1 CATHODE 2 ANODE 3 THERMAL Figure 3. Solder pad layout. Note for Figure 3: 1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. Solder Pad Design Figure 4. Solder pad layout. Note for Figure 4: 1. The photograph shows the recommended LUXEON Rebel Color Portfolio layout on printed circuit board (PCB). This design easily achieves a thermal resistance of 7K/W. Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 10 Wavelength Characteristics LUXEON Rebel Green, Cyan, Blue, Royal Blue, Red, Red-Orange, Amber at Test Current, 25°C Relative Spectral Power Distribution 1.0 Cyan 0.8 Royal Blue 0.6 RedOrange Green Blue Deep Red Amber 0.4 Red 0.2 0.0 400 600 550 500 450 650 700 Wavelength (nm) Figure 5. Relative intensity vs. wavelength. LUXEON Rebel ES Lime and LUXEON Rebel PC Amber at 350 mA, 25°C or 85°C 1.0 Relative Spectral Power Distribution Lime (LXML-PX02) 0.8 PC Amber (LXM2-PL01) 0.6 0.4 0.2 0.0 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 6. Relative intensity vs. wavelength. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 11 Typical Light Output Characteristics 1.2 Relativ ve Luminous/Radiant Flux 1.1 1.0 0.9 0.8 LUXEON Rebel ES Blue (LXML-PB02) & Blue (LXML-PB01) Photometric 0.7 Green (LXML-PM01) & Cyan (LXMLPE01) Photometric LUXEON Rebel ES Royal-Blue (LXMLPR02) & Royal-Blue (LXML-PR01) Radiometric 0.6 0.5 -20 0 20 40 60 1. 80 100 120 LXML-PR02 and LXML-PB02 values are based on 700 mA drive current. * 140 Thermal Pad Temperature (°C) Figure 7. Relative light output vs. thermal pad temperature for green, cyan, blue and royal blue. 1.75 Red (LXML-PD01 & LXM2-PD01) Red-orange (LXML-PH01 & LXM2-PH01) 1.50 Relativ ve Luminous Flux Output Amber (LXML-PL01) PC Amber (LXM2-PL01) Deep Red (LXM3-PD01) 1.25 1.00 0.75 0.50 0.25 0.00 -20 0 20 40 60 80 100 Thermal Pad Temperature (°C) Figure 8. Relative light output vs. thermal pad temperature for red, deep red, red-orange and amber. 1.2 Lime (LXML-PX02) Relative Luminous Flux 1.1 1.0 0.9 0.8 0.7 25 50 75 100 125 150 Thermal Pad Temperature (°C) Figure 9. Relative light output vs. thermal pad temperature for lime. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 12 Typical Forward Current Characteristics 1000 ES Royal Blue and ES Blue (LXMLPx02) Forward Current (mA) 800 Green, Cyan, Blue and Royal Blue (LXML-Px01) 600 Lime (LXML-PX02) 400 200 0 2.3 2.5 2.7 2.9 3.1 3.3 Forward Voltage (V) Figure 10. Forward current vs. forward voltage for green, cyan, blue and royal blue at test temperature = 25°C and lime at test temperature = 85°C. Forrward Current (mA) 1000 900 Red (LXM2-PD01) & Red Orange (LXM2PH01) Red (LXML-PD01), Red-orange (LXMLPH01) & Amber (LXML-PL01) PC Amber (LXM2-PL01) 800 Deep Red (LXM3-PD01) 700 600 500 400 300 200 100 0 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 Forward Voltage (V) Figure 11. Forward current vs. forward voltage for red, deep red, red-orange, amber, and PC amber at thermal pad temperature = 25°C. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 13 Typical Relative Luminous Flux Relative Flux vs. Forward Current for LUXEON Rebel ES Royal Blue and Blue 2 1.8 Relative Radiant Flux 1.6 1.4 1.2 1 0.8 LUXEON Rebel ES Royal Blue (LXML-PR02) and ES Blue (LXML-PB02) 0.6 04 0.4 0.2 0 0 200 400 600 800 1000 1200 1400 1600 Forward Current (mA) Figure 12. Relative luminous flux or radiometric power vs. forward current for Rebel ES Royal Blue and ES Blue at thermal pad temperature = 25°C. Relative Luminous Flux vs. Forward Current for LUXEON Rebel ES Lime and LUXEON Rebel Green, Cyan, Blue and Royal Blue 2.7 2.4 Relative Luminous Flux 2.1 1.8 1.5 1.2 Blue (LXML-PB01) 0.9 Royal Blue (LXML-PR01) 0.6 Green (LXML-PM01) Lime (LXML-PX02) 0.3 0.0 0 200 400 600 800 1000 Forward Current (mA) Figure 13. Relative luminous flux or radiometric power vs. forward current for green, cyan, blue and royal blue at thermal pad temperature = 25°C and Rebel ES Lime at thermal pad temperature = 85°C. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 14 Relative Luminous Flux vs. Forward Current for LUXEON Rebel Red, Deep Red, Red-Orange, Amber, Junction Temperature = 25°C Normalized Lum minous Flux/Radiometric Power 2.00 1.75 1.50 1.25 1.00 0.75 Red (LXM2-PD01) & Red-orange (LXM2PH01) 0.50 Red (LXML-PD01), Red-orange (LXMLPH01) & Amber (LXML-PL01) Deep Red (LXM3-PD01) 0.25 0.00 0 100 200 300 400 500 600 700 800 Forward Current (mA) Figure 14. Relative luminous flux vs. forward current for red, deep red, red-orange and amber at Thermal Pad = 25°C maintained. Relative Luminous Flux for LUXEON Rebel PC Amber Junction Temperature = 25°C 2.00 1.75 Relatiive Luminious Flux 1.50 1.25 1.00 0.75 0.50 PC Amber (LXM2-PL01) 0.25 0.00 0 00 0 100 200 300 400 500 600 700 Forward Current (mA) Figure 15. Relative luminous flux vs. forward current for PC amber LXM2-PL01 emitters. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 15 Typical Radiation Patterns Spatial Radiation Pattern for LUXEON Rebel Green, Cyan, Blue, Royal Blue and LUXEON Rebel ES Royal Blue and Blue 100% 90% 80% Relative Inten nsity % 70% 60% 50% LUXEON Rebel ES Royal Blue (LXML-PR02) and ES Blue (LXML-PB02) 40% 30% green LXML-PM01, cyan LXML-PE01, blue LXML-PB01 & royal blue LXML-PR01 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (deg) Figure 16. Spatial radiation pattern for LUXEON Rebel green, cyan, blue, royal blue, LUXEON Rebel ES Royal Blue and blue lambertian. Polar Radiation Pattern for LUXEON Rebel Green, Cyan, Blue, Royal Blue and LUXEON Rebel ES Royal Blue and Blue 0° -30° 30° 60° -60° -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 LUXEON Rebel ES Royal Blue LXML-PR02 and ES Blue LXML-PB02 green LXML-PM01, cyan LXML-PE01, blue LXML-PB01 & royal blue LXML-PR01 Figure 17. Polar radiation pattern for LUXEON Rebel green, cyan, blue, royal blue and LUXEON Rebel ES royal blue lambertian. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 16 Typical Radiation Patterns, Continued Spatial Radiation Pattern for LUXEON Rebel Red, Red-Orange and Amber 100% 90% 80% Relative R Intensity % 70% 60% 50% 40% 30% red LXM2 -PD01 & red-orange LXM2-PH01 20% red LXML-PD01, red-orange LXML-PH01 & amber LXML-PL01 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 18. Spatial radiation pattern for red, red-orange and amber lambertian. Polar Radiation Pattern for LUXEON Rebel Red, Red-Orange and Amber 0° ‐30° 30° 60° ‐60° ‐1.0 ‐0.8 ‐0.6 ‐0.4 ‐0.2 0.0 0.2 0.4 0.6 0.8 1.0 red LXM2‐PD01 & red‐orange LXM2‐PH01 red LXML‐PD01, red‐orange LXML‐PH01 & amber LXML‐PL01 Figure 19. Polar radiation pattern for red, red-orange and amber lambertian. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 17 Typical Radiation Patterns, Continued Spatial Radiation Pattern for LUXEON Rebel Deep Red 120% Relative In ntensity (% %) 100% 80% 60% 40% 20% Deep Red (LXM3-PD01) 0% -90 -60 -30 0 30 60 90 Angular Displacement (deg) Figure 20. Spatial radiation pattern for deep red lambertian. Polar Radiation Pattern for LUXEON Rebel Deep Red 0° 100 -30° 30° 80 60 -60° 60 60° 60 40 20 -90° 90° 0 Deep Red (LXM3-PD01) -120° -150° -150 120° 150° 150 180° Figure 21. Polar radiation pattern for deep red lambertian. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 18 Typical Radiation Patterns, Continued Spatial Radiation Pattern for LUXEON Rebel PC Amber 1.2 1.0 Relative lative Intensity 0.8 0.6 0.4 0.2 0.0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement (degrees) Figure 22. Spatial radiation pattern, PC amber, LXM2-PL01. Polar Radiation Pattern for LUXEON Rebel PC Amber Figure 23. Polar radiation pattern, PC amber, LXM2-PL01. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 19 Typical Chromaticity Characteristics Chromaticity Characteristics vs. Temperature 0.010 0.008 0.006 0.004 x, x, y 0.002 0.000 Dx -0.002 Dy -0.004 -0.006 -0.008 -0.010 -40 -20 0 20 40 60 80 100 120 140 Thermal Pad Temperature (ºC) Figure 24. Chromaticity coordinate vs. thermal pad temperature. Test current: 350 mA. Chromaticity Characteristics vs. Forward Current, Junction Temperature = 25°C 0.004 0.003 0 002 0.002 x, y 0.001 0.000 -0.001 Dx at 25C -0.002 Dy at 25C -0.003 -0.004 0 200 400 600 800 1000 1200 Forward Current (mA) Figure 25. Chromaticity coordinate vs. forward current. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 20 Emitter Pocket Tape Packaging 20 1000 50 Figure 26. Emitter pocket tape packaging. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 21 Emitter Reel Packaging Figure 27. Emitter reel packaging. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 22 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf ). Decoding Product Bin Labeling LUXEON Rebel Color Portfolio emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Format of Labeling for Emitters Reels of green, cyan, blue, royal blue, red, red-orange, amber and PC amber emitters are labeled with a three digit alphanumeric CAT code following the format below. ABC A = Flux bin (J, K, L, M etc.) B = Color bin (2, 4, 6 etc.) C = Vf bin (D, E, F, G, etc.) Reels of lime are labeled with the following CAT code format below. ABCD A = Flux bin (F, G, H, etc.) BC = Color bin (A0) D = Vf bin (P,R) LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 23 Luminous Flux Bins Tables 7 and 8 list the standard photometric luminous flux/radiometric power bins for LUXEON Rebel and LUXEON Rebel ES color emitters (tested and binned at different conditions). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 7. Flux Bins - All Colors (except Royal Blue, Deep Red and Lime) - If = 350 mA or 700 mA and Tj = 25°C Bin Code D E F G H J K L M N X P Y Minimum Flux (lm) 18.1 23.5 30 40 50 60 70 80 90 100 110 120 130 Maximum Flux (lm) 23.5 30 40 50 60 70 80 90 100 110 120 130 140 Table 8. Flux Bins - LUXEON Rebel ES Lime at If = 350 mA and Tj = 85°C Bin Code Minimum Luminous Flux (lm) Maximum Luminous Flux (lm) E F G H J 140 150 160 170 180 150 160 170 180 190 LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 24 Radiometric Flux Bins Table 9. Flux Bins - LUXEON Rebel Royal Blue (If = 350 mA) and LUXEON Rebel ES Royal Blue (If = 700 mA) at Tj = 25°C D E F Minimum Radiometric Flux (mW) 350 425 500 Maximum Radiometric Flux (mW) 425 500 600 G H J K Y A B M 600 700 800 900 950 1000 1050 1100 700 800 900 950 1000 1050 1100 1200 Bin Code Table 10. Flux Bins - LUXEON Rebel Deep Red at If = 350 mA and Tj = 25°C Bin Code C D E Minimum Radiometric Flux (mW) 260 300 350 LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. Maximum Radiometric Flux (mW) 300 350 400 25 Forward Voltage Bins The following forward voltage bins include the minimum and maximum Vf bin values for the emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 11. Vf Bins - for LUXEON Rebel PC Amber (LXML-Pxx1 and LXM2-PL01) tested at If = 350 mA A B C Minimum Forward Voltage (V) 2.31 2.55 2.79 Maximum Forward Voltage (V) 2.55 2.79 3.03 D E 3.03 3.27 3.27 3.51 Bin Code Table 12. Vf Bins - for LUXEON Rebel ES Royal Blue (LXML-PR02) and Blue (PXML-PB02) tested at If = 700 mA Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) P R S T 2.50 2.75 3.00 3.25 2.75 3.00 3.25 3.50 Table 13. Vf Bins - for LUXEON Rebel Red, Red Orange (LXM2-Pxx1) and Deep Red (PXM3-PD01) tested at 350 mA. Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) V W X Y Z 1.80 2.00 2.20 2.40 2.60 2.00 2.20 2.40 2.60 2.80 Table 14. Vf Bins - for LUXEON Rebel ES Lime (LXML-PX02) tested at If = 350 mA. Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) P R 2.60 2.75 2.75 3.00 LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 26 Color Bins Table 15. Dominant Wavelength Bin Structure for Green 1 2 3 Minimum Dominant Wavelength (nm) 520 525 530 Maximum Dominant Wavelength (nm) 525 530 535 4 535 540 Minimum Dominant Wavelength (nm) 490 495 500 505 510 Maximum Dominant Wavelength (nm) 495 500 505 510 515 Bin Code Table 16. Dominant Wavelength Bin Structure for Cyan Bin Code 1 2 3 4 5 Table 17. Dominant Wavelength Bin Structure for LUXEON Rebel and LUXEON Rebel ES Blue Bin Code 1 2 3 4 5 Minimum Dominant Wavelength (nm) 460 465 470 475 480 Maximum Dominant Wavelength (nm) 465 470 475 480 485 Table 18. Peak Wavelength Bin Structure for LUXEON Rebel and LUXEON Rebel ES Royal Blue Bin Code 3 4 5 6 Minimum Peak Wavelength (nm) 440 445 450 455 LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. Maximum Peak Wavelength (nm) 445 450 455 460 27 Color Bins, Continued Table 19. Dominant Wavelength Bin Structure for Red Bin Code 4 5 Minimum Dominant Wavelength (nm) 620 630 Maximum Dominant Wavelength (nm) 630 645 Table 20. Dominant Wavelength Bin Structure for Red-Orange Bin Code 2 Minimum Dominant Wavelength (nm) 610 Maximum Dominant Wavelength (nm) 620 Table 21. Dominant Wavelength Bin Structure for Amber Bin Code 1 2 4 6 Minimum Dominant Wavelength (nm) 585 587 590 592 Maximum Dominant Wavelength (nm) 587 590 592 595 Table 22. Peak Wavelength Bin Structure for Deep Red Bin Code 6 7 Minimum Peak Wavelength (nm) 650 660 LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. Maximum Peak Wavelength (nm) 660 670 28 Color Bins for PC Amber and Lime 0.6 ES Lime 0.55 y PC Amber 0.5 0.45 0.4 0.36 0.41 0.46 0.51 0.56 0.61 x Figure 28. Color bin structure. Table 23. LUXEON Rebel PC Amber Bin Coordinates Bin Code PC Amber Lime Bin Code x y 2 0.5622 0.5576 0.5775 0.5843 0.4372 0.4326 0.4132 0.4151 A0 0.3819 0.4191 0.4327 0.3972 0.5055 0.5790 0.5655 0.4986 Note for Table 23: 1. LUXEON Rebel PC amber and lime emitters are tested and binned by x,y coordinates. LUXEON Rebel Color Portfolio Datasheet DS68 20140215 ©2014 Philips Lumileds Lighting Company. 29 Who We Are Philips Lumileds focuses on one goal: Creating the world’s highest performing LEDs. The company pioneered the use of solid-state lighting in breakthrough products such as the first LED backlit TV, the first LED flash in camera phones, and the first LED daytime running lights for cars. Today we offer the most comprehensive portfolio of high quality LEDs and uncompromising service. Philips Lumileds brings LED’s qualities of energy efficiency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retrofit lamps. Our products are engineered for optimal light quality and unprecedented efficacy at the lowest overall cost. By offering LEDs in chip, packaged and module form, we deliver supply chain flexibility to the inventors of next generation illumination. Philips Lumileds understands that solid state lighting is not just about energy efficiency. It is about elegant design. Reinventing form. Engineering new materials. Pioneering markets and simplifying the supply chain. It’s about a shared vision. Learn more about our comprehensive portfolio of LEDs at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2014 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON Rebel Color Portfolio Datasheet DS68 20140215