J104D RoHS Compliant E197851 20.4 x 10.05 x 11.0 mm Features • • • • • • High sensitivity Low cost Conforms to FCC part 68 Clearance more than 1.2mm between coil and contacts Creepage more than 1.9mm between coil and contacts Bifurcated contacts for high reliability Contact Data* Contact Arrangement 2C = DPDT Bifurcated Contacts Maximum Switching Power 48W, 120VA Contact Rating 2A @ 24VDC, Resistive Maximum Switching Voltage 250VAC, 100VDC 1A @ 120VAC, Resistive Maximum Switching Current 2A Contact Material AgNi + Au Clad Contact Resistance ≤ 50 milliohms initial Coil Data* Coil Voltage VDC Rated Coil Resistance Ω +/- 10% Max .15W .20W .36W Pick Up Voltage Release Voltage VDC (max) VDC (min) 75% of rated voltage .45W Coil Power W Operate Time ms Release Time ms .15 .20 .36 .45 6 4 10% of rated voltage 3 3.9 60 45 25 20 2.25 0.3 5 6.5 167 125 70 56 3.75 0.5 6 7.8 240 180 100 80 4.50 0.6 9 11.7 540 405 225 180 6.75 0.9 12 15.6 960 720 400 320 9.00 1.2 24 31.2 3840 2880 1600 1280 18.00 2.4 48 62.4 n/a 11520 6400 5100 36.00 4.8 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 1000V rms min. @ sea level initial Contact to Contact * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 500V rms min. @ sea level initial Shock Resistance 100m/s2 for 11 ms Vibration Resistance 1.5mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 5N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +85oC Solderability 260oC for 5 s Weight 5g www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J104D Ordering Information 1. Series J104D 2C 12VDC .45 S J104D 2. Contact Arrangement 2C = DPDT 3. Coil Voltage 3VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC **Not available with .15W coil power 4. Coil Power .15 = .15W .20 = .20W .36 = .36W .45 = .45W 5. Seal S = Sealed (standard) Dimensions Schematic & PC Layout Units = mm Bottom View 20.37 [.80] 9.97 [.39] 11.10 [.44] 11.42 [.45] 7.62 [.30] 5.08 [.20] Ø1.00 TYP [.04] 7.62 [.30] page 2 1.30 [.05] 5.08 [.20] 7.62 [.30] 5.08 [.20] 1.18 [.05] www.citrelay.com 3.58 TYP [.14] phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. 7.62 [.30] 5.08 [.20] fax - 763.535.2194 Specifications and availability subject to change without notice.