TECHNICAL DATASHEET Rev. A LANH 2 SERIES 5, 12, & 24 VDC Nominal Input Voltages 4-Pin SIL and 8-Pin DIL Package Types 3.3, 5, 9, 12, & 15 VDC Non-Regulated Single Outputs 2 Watt DC/DC Power Converters SIL Package Type DIL Package Type FEATURES • Non-Regulated Single Outputs • 1000VDC I/O Isolation • 5, 12, and 24 VDC Nominal Input Voltages • Low Ripple & Noise • RoHS Compliant • 100% Burned-in • 2 Watts Output Power • -40°C to +85°C Operating Temperature Range • Input Filter with Internal Capacitor • 4-Pin SIL and 8-Pin DIL Package Types Available DESCRIPTION The LANH 2 series consists of 2 Watt DC/DC power converters with 5, 12, and 24 VDC nominal input voltages and 3.3, 5, 9, 12, and 15 VDC non-regulated single outputs. Some features include low ripple and noise, 1000VDC I/O isolation, and a -40°C to +85°C operating temperature range. This series is RoHS compliant and offers both 4-pin SIL and 8-Pin DIL package types. 04/30/2012 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 LANH 2 Series SIL and DIL Package Types Non-Regulated Single Outputs 2 Watt DC/DC Power Converters Rev. A TECHNICAL SPECIFICATIONS: LANH 2 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS Input Voltage Range Input Surge Voltage TEST CONDITIONS 5VDC nominal input models 12VDC nominal input models 24VDC nominal input models 5VDC nominal input models 12VDC nominal input models 24VDC nominal input models Input Current OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Output Current Line Regulation per 1.0% change in input change Load Regulation Capacitive Load 2 Watt Output Power Output Ripple 20MHz Bandwidth Temperature Coefficient PROTECTION Short Circuit Protection Duration GENERAL SPECIFICATIONS Efficiency Switching Frequency Nominal input Isolation Voltage (Input to Output) Test duration 60 seconds / 0.5mA Isolation Resistance 500VDC Isolation Capacitance 1KHz / 250mVrms ENVIRONMENTAL SPECIFICATIONS Operating Temperature Full load Case Surface Temperature Storage Temperature Humidity Cooling PHYSICAL SPECIFICATIONS Case Material SIL Package Type Weight DIL Package Type SIL Package Type Dimensions (L x W x H) DIL Package Type Min 4.5 10.8 21.6 -0.7 -0.7 -0.7 Nom Max Unit 5 5.5 12 13.2 24 26.4 5 7.5 12 15 24 30 See Table VDC VDC See Table ±5 See Table 1.3 See Table 330 2 See Table ±0.01 ±0.02 0 % % µF W %/°C 1 second max See Table 80 KHz VDC MΩ pF 1000 1000 40 -40 -40 -55 +85 +95 +105 90 Free air convection °C °C °C % plastic 0.05oz (1.4g) 0.06oz (1.8g) 0.46 x 0.24 x 0.40 inches (11.68 x 6.00 x 10.15 mm) 0.50 x 0.39 x 0.30 inches (12.70 x 10.00 x 7.70 mm) *Due to advances in technology, specifications are subject to change without notice. 04/30/2012 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 5 LANH 2 Series SIL and DIL Package Types Non-Regulated Single Outputs 2 Watt DC/DC Power Converters Rev. A MODEL SELECTION TABLES SIL Package Type Models Input Current Output Voltage Output Current No Load Full Load Output Power Efficiency 3.3 VDC 600mA 40mA 533mA ±12% 50mV 2W 75% 5 VDC 400mA 40mA 533mA ±10% 60mV 2W 75% 9 VDC 222mA 40mA 533mA ±8% 80mV 2W 75% LANH512N2 12 VDC 167mA 35mA 520mA ±8% 100mV 2W 77% LANH515N2 15 VDC 134mA 35mA 520mA ±8% 120mV 2W 77% LANH1233N2 3.3 VDC 600mA 18mA 222mA ±12% 50mV 2W 75% 5 VDC 400mA 18mA 222mA ±10% 60mV 2W 75% 9 VDC 222mA 16mA 217mA ±8% 80mV 2W 77% LANH1212N2 12 VDC 167mA 16mA 217mA ±8% 100mV 2W 77% LANH1215N2 15 VDC 134mA 16mA 217mA ±8% 120mV 2W 77% LANH2433N2 3.3 VDC 600mA 5mA 111mA ±12% 50mV 2W 75% 5 VDC 400mA 5mA 111mA ±10% 60mV 2W 75% 9 VDC 222mA 5mA 110mA ±8% 80mV 2W 76% LANH2412N2 12 VDC 167mA 5mA 110mA ±8% 100mV 2W 76% LANH2415N2 15 VDC 134mA 5mA 110mA ±8% 120mV 2W 76% Output Power Efficiency Model Number Input Voltage LANH533N2 LANH505N2 LANH509N2 5 VDC (4.5 – 5.5 VDC) LANH1205N2 LANH1209N2 12 VDC (10.8 – 13.2 VDC) LANH2405N2 LANH2409N2 24 VDC (21.6 – 26.4 VDC) Load Ripple & Noise Regulation DIL Package Type Models Model Number Input Voltage LANH505N2DIL Input Current Output Voltage Output Current No Load Full Load Load Ripple & Noise Regulation 5 VDC 400mA 40mA 533mA ±10% 60mV 2W 75% LANH509N2DIL 5 VDC 9 VDC 222mA 40mA 533mA ±8% 80mV 2W 75% LANH512N2DIL (4.5 – 5.5 VDC) 12 VDC 167mA 35mA 520mA ±8% 100mV 2W 77% LANH515N2DIL 15 VDC 134mA 35mA 520mA ±8% 120mV 2W 77% LANH1205N2DIL 5 VDC 400mA 22mA 222mA ±10% 60mV 2W 75% LANH1209N2DIL 12 VDC 9 VDC 222mA 20mA 217mA ±8% 80mV 2W 77% LANH1212N2DIL (10.8 – 13.2 VDC) 12 VDC 167mA 20mA 217mA ±8% 100mV 2W 77% LANH1215N2DIL 15 VDC 134mA 20mA 217mA ±8% 120mV 2W 77% LANH2405N2DIL 5 VDC 400mA 7mA 111mA ±10% 60mV 2W 75% LANH2409N2DIL 24 VDC 9 VDC 222mA 6mA 110mA ±8% 80mV 2W 76% LANH2412N2DIL (21.6 – 26.4 VDC) 12 VDC 167mA 6mA 110mA ±8% 100mV 2W 76% 15 VDC 134mA 6mA 110mA ±8% 120mV 2W 76% LANH2415N2DIL 04/30/2012 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 Rev. A LANH 2 Series SIL and DIL Package Types Non-Regulated Single Outputs 2 Watt DC/DC Power Converters DERATING MECHANICAL DRAWINGS 04/30/2012 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 Rev. A LANH 2 Series SIL and DIL Package Types Non-Regulated Single Outputs 2 Watt DC/DC Power Converters COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 04/30/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5