SPECIFICATION Tol RDC IDC ( H) % MAX IN ( ) (A) CDRH124-3R9 3.9 @ 100 kHz M 0.015 6.5 CDRH124-4R7 4.7 @ 100 kHz M 0.018 5.7 CDRH124-6R9 6.9 @ 100 kHz M 0.023 4.9 CDRH124-100 10 @ 100 kHz M 0.028 4.5 CDRH124-120 12 @ 100 kHz M 0.038 4 CDRH124-150 15 @ 100 kHz M 0.05 3.2 CDRH124-180 18 @ 100 kHz M 0.057 3.1 CDRH124-220 22 @ 100 kHz M 0.066 2.9 CDRH124-270 27 @ 100 kHz M 0.08 2.8 CDRH124-330 33 @ 100 kHz M 0.097 2.7 CDRH124-390 39 @ 100 kHz M 0.132 2.1 CDRH124-470 47 @ 100 kHz M 0.15 1.9 CDRH124-560 56 @ 100 kHz M 0.19 1.8 CDRH124-680 68 @ 100 kHz M 0.22 1.5 CDRH124-820 82 @ 100 kHz M 0.26 1.3 CDRH124-101 100 @ 100 kHz M 0.308 1.2 CDRH124-121 120 @ 100 kHz M 0.38 1.1 CDRH124-151 150 @ 100 kHz M 0.53 0.95 CDRH124-181 180 @ 100 kHz M 0.62 0.85 CDRH124-221 220 @ 100 kHz M 0.7 0.8 CDRH124-271 270 @ 100 kHz M 0.876 0.6 CDRH124-331 330 @ 100 kHz M 0.99 0.5 TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = PACKAGING MARKING CDRH124 SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 500PCS/REEL = 3 CHARACTERS, VALUE NOTE TOLERANCES L=15%; M=20%; N=30% 12.0 12.0 4.50 L 2.9 7 2.9 5.4 Part NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH124 SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH124 SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00