BAS70_BAS70-04_BAS70-05_BAS70-06 Schottky Diodes Features • General-purpose diode for high-speed switching • Circuit protection • Voltage clamping • High-level detecting and mixing • RoHS compliant package Packing & Order Information 3,000/Reel Graphic symbol Graphic symbol ORDERING INFORMATION Type Marking BAS70 73s BAS70-04 74s BAS70-05 75s BAS70-06 76s Pin Configuration 1=A 1=A1 1=A1 1=C1 2 n.c 2 =C2 2 =A2 2 =C2 3=C 3=C1/A2 3=C1/C2 3=A1/A2 Package SOT-23 SOT-23 SOT-23 SOT-23 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings Symbol Parameter Value Unit VR Diode reverse voltage 70 V IF Forward current IF 70 mA IFSM Surge forward current, t ≤ 10ms 100 mA Ptot Total power dissipation BAS 70, TS ≤ 66°C 250 mW Ptot BAS 70-04, BAS 70-05, BAS 70-06, TS ≤ 40°C 250 mW TJ Junction temperature 150 °C TOP Operating temperature range -55 to +150 °C TSTG Storage temperature -55 to +150 °C Publication Order Number: [BAS70_BAS70-04_BAS70-05_BAS70-06] © Bruckewell Technology Corporation Rev. A -2014 BAS70_BAS70-04_BAS70-05_BAS70-06 Schottky Diodes Maximum Ratings Symbol Parameter Value Unit RthJA Junction - ambient BAS 70 ≤405 K/W RthJA Junction - ambient BAS 70-04 ≤575 K/W RthJS Junction - soldering point BAS 70 ≤335 K/W RthJS Junction - soldering point BAS 70-04 ≤435 K/W 1) Package mounted on epoxy pcb 40mm x 40mm x 1.5mm / 6cm2 Cu Electrical Characteristics at TA = 25°C, unless otherwise specified. DC characteristics Symbol Parameter V(BR) Breakdown voltage I(BR) = 10 μA MIN TYP MAX UNIT V 70 Reverse current μA IR VR = 50 V 0.1 VR = 70 V 1.0 μA Forward voltage VF IF = 1 mA 375 410 IF = 10 mA 705 750 IF = 15 mA 880 1000 TYP MAX UNIT 1.6 2 pF 100 ps AC characteristics Symbol Parameter CT Diode capacitance CT - pF VR = 0 V, f = 1 MHz τ MIN Charge carrier life time ps IF = 25 mA RF Differential forward resistance IF = 10 mA, f = 10 kHz Publication Order Number: [BAS70_BAS70-04_BAS70-05_BAS70-06] 30 mV Ω © Bruckewell Technology Corporation Rev. A -2014 BAS70_BAS70-04_BAS70-05_BAS70-06 Schottky Diodes ■RATINGS AND CHARACTERISTIC CURVES Forward current IF = f (VF) Reverse current IR = f (VR) TA = 25°C TA = Parameter Diode capacitance CT = f (VR) Differential forward resistance rf = f (IF) f = 1MHz f = 10 kHz Publication Order Number: [BAS70_BAS70-04_BAS70-05_BAS70-06] © Bruckewell Technology Corporation Rev. A -2014 BAS70_BAS70-04_BAS70-05_BAS70-06 Schottky Diodes ■RATINGS AND CHARACTERISTIC CURVES Forward current IF = f (TA*;TS) Permissible pulse load RthJS = f (tp) * Package mounted on epoxy Permissible Pulse Load IFmax / IFDC = f(tp) Publication Order Number: [BAS70_BAS70-04_BAS70-05_BAS70-06] © Bruckewell Technology Corporation Rev. A -2014 BAS70_BAS70-04_BAS70-05_BAS70-06 Schottky Diodes Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [BAS70_BAS70-04_BAS70-05_BAS70-06] © Bruckewell Technology Corporation Rev. A -2014