Crystek CCO-983-500.000 9x14 mm smd,3.3v/5v, sinewave Datasheet

CCO-983/985 Model
9×14 mm SMD, 3.3V/5V, SineWave
Frequency Range:
50 MHz to 500 MHz
Temperature Range:
(Option X)
Storage:
±25ppm, 0°C to 70°C
±50ppm, -40°C to 85°C
-45°C to 90°C
Input Voltage:
3.3V ±0.3V
5.0V ±0.5V
30mA Max @ 3.3V
50mA Max @ 5.0V
Input Current:
Output:
Output Power:
Start-up time:
Load
True SineWave
0 dBm Min
2ms Typical, 10ms Max
50 Ω
2nd Harmonic:
Sub-Harmonics:
(50 MHz ~ 170 MHz)
(171 MHz ~ 500 MHz)
-20 dBc Max
Period Jitter:
Phase Jitter:
(20,000 periods)
12 kHz~20 MHz
50 kHz~80 MHz
Phase Noise Typ.:
(@311.04 MHz)
Aging:
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
None
-40 dBc Typical, -35 dBc Max
<5ps RMS (1-sigma) Max
<1ps RMS (1-sigma) Max
<1ps RMS (1-sigma) Max
-50 dBc/Hz
-80 dBc/Hz
-110 dBc/Hz
-135 dBc/Hz
-145 dBc/Hz
<3ppm 1st year, <2ppm every year thereafter
Applications:
10 Gigabit Ethernet
OC48: Forward Error Correction
Broadband Networks
SONET/SDH/DWD
ATM
Network/switch
Telecom
Designed using FR5 PCB & HFF crystal technology to provide a
Low Noise, Low Jitter Crystal Oscillator with True Sinewave Output.
Specifications subject to change without notice.
CRYSTEK
CORPORATION
TD-041205 Rev. J
Page 1 of 2
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
0.560
(14.2)
CCO-983/985 Model
9×14 mm SMD, 3.3V/5V, SineWave
CRYSTEK
Part Number
Frequency
Date Code
0.360
(9.14)
Crystek Part Number Guide
0.040
(1.01)
1
4
CCO-983 X-500.000
#1
#2
#3
2
0.070
(1.77)
3
0.200
(5.08)
#4
0.560
(14.2)
SUGGESTED PAD LAYOUT
0.050
(1.27)
0.210
(5.3)
#1 Crystek 9×14 SMD SineWave Oscillator
#2 Model 983 = 983=3.3V 985=5.0V
#3 Temp. Range: Blank = 0/70°C, X=-40/85°C
#4 Frequency in MHz: 3 or 6 decimal places
0.090
(2.28)
Example:
CCO-983X-500.000 = 3.3V, -40/85°C, 500.000 MHz
Pad
Connection
1
2
3
4
N/C
GND
OUT
Vdd
0.280
(7.11)
0.200
(5.08)
Standard Frequencies MHz
167.3317
212.5000
250.0000
311.0400
RECOMMENDED REFLOW SOLDERING PROFILE
TEMPERATURE
77.7600
155.5200
156.2500
161.1328
166.6286
260°C
Ramp-Up
3°C/Sec Max.
217°C
Critical
Temperature Zone
Ramp-Down
6°C/Sec.
200°C
150°C
Preheat
180 Secs. Max.
8 Minutes Max.
90 Secs. Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
Mechanical:
Shock:
Solderability:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Packaging:
Tape/Reel:
100ea, 250ea, 500ea 24mm Tape
Specifications subject to change without notice.
CRYSTEK
CORPORATION
TD-041205 Rev. J
Page 2 of 2
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
Similar pages