CAPACITORS ALUMINIUM ELECTROLYTIC STANDARD RADIAL CEBM For general purpose SECTION 1 Wide CV value range Life 2000 hours at +85°C Safety vent construction products RANGE V µF 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 6.3 øxl/mm 6.3x11 8x11.5 10x12.5 12.5x20 12.5x20 16x25 16x25 16x31.5 18x35.5 10 øxl/mm 5x11 6.3x11 8x11.5 8x11.5 10x16 12.5x20 12.5x25 16x25 16x31.5 18x35.5 18x35.5 16 øxl/mm 6.3x11 8x11.5 8x11.5 10x12.5 10x20 12.5x25 16x25 16x31.5 18x32 18x35.5 25 øxl/mm 5x11 6.3x11 8x11.5 10x12.5 10x16 12.5x20 16x25 16x31.5 18x35.5 18x35.5 35 øxl/mm 5x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x25 16x31.5 18x35.5 18x35.5 50 øxl/mm 5x11 6.3x11 6.3x11 8x11.5 10x16 10x20 12.5x20 16x25 16x34.5 18x35.5 63 øxl/mm 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x20 12.5x20 12.5x25 16x31.5 22x40 100 øxl/mm 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11.5 10x12.5 10x16 12.5x20 16x25 16x25 16x31.5 18x40 160 øxl/mm 6.3x11 6.3x11 6.3x11 8x11.5 8x11.5 10x12.5 10x20 12.5x20 12.5x25 16x25 18x35.5 200 øxl/mm 6.3x11 6.3x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x25 12.5x25 16x31.5 22x35.5 Sizes may reduce as technology continually improves. ORDERING INFORMATION CEBM 100 16 TA Range Capacitance µF Voltage V Options: TA = Tape/Ammo-box Blank = Loose CRxx = Cropped to xxMM TA = 5mm pitch, e.g. TA 2mm = 2mm pitch 33 www.dubilier.co.uk 250 øxl/mm 5x11 5x11 6.3x11 6.3x11 8x11 8x11 10x16 10x16 10x20 12.5x25 12.5x25 16x31.5 400 øxl/mm 6.3x11 6.3x11 6.3x11 6.6.3x11 8x11.5 8x11.5 10x16 10x20 12.5x20 16x25 16x31.5 18x35.5 450 øxl/mm 6.3x11 6.3x11 6.3x11 6.3x11 8x11 10x16 10x20 12.5x20 12.5x25 16x31.5 18x35.5 18x40 CAPACITORS ALUMINIUM ELECTROLYTIC STANDARD RADIAL CEBM SECTION 1 SPECIFICATION Item Operating Temperature Range Rated Working Voltage Range Nominal Capacitance Range Capacitance Tolerance Leakage Current tan ∂ Ripple Current Low Temperature Characteristics Impedance High Temperature Loading Shelf Life Performance Characteristics -40 to +85°C -25 to +85°C 6.3 to 100V DC 160 to 450V DC 0.47 to 15000µF 0.47 to 220µF ± 20% (120Hz, +20°C) l ≤ 0.01CV or 3[µA] after 2 minutes l ≤ 0.06CV [µA] after 2 minutes whichever is greater measured with application of rated working voltage at +20°C rated working voltage applied at +20°C Working voltage [V] 6.3 10 16 25 35 50 63 100 tan ∂ (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 Working voltage [V] 160 200 250 400 450 0.18 0.20 0.20 tan ∂ (max.) 0.16 0.18 (120Hz, +20°C)For capacitance value > 1000µF, add 0.02 per extra 1000µF Refer to standard products table (120Hz, +85°C) Correction factor for frequency Frequency [Hz] 50/60 120 1K 10K Correction factor (Multiplier) 0.7 1 1.3 1.7 Impedance ratio max. at 120Hz Working voltage [V] 6.3 10 16 25 35 50 63 100 -25°C/+20°C 4 3 2 2 2 2 2 2 -40°C/+20°C 8 6 4 4 3 3 3 3 Working voltage [V] 160 200 250 400 450 -25°C/+20°C 2 2 3 15 15 For capacitance value > 1000µF, Add 0.5 per extra 1000µF for -25°C/+25°C. Add 1.0 per extra 1000µF for -40°C/+20°C. Maximum C-Z (rated cap-[µF] x Impedance [Ω]) value at 10KHz Working voltage [V] 6.3 10 16 25 35 50 63 100 C-Z max. at +20°C 220 160 125 90 80 60 55 50 C-Z max. at -25°C 3000 1900 1300 800 650 560 500 450 Working voltage [V] 160 200 250 450 C-Z max. at +20°C 100 140 150 270 C-Z max. at -25°C 2400 2500 3100 12000 Test conditions Duration 2000 hours Ambient temperature +85°C Applied voltage Rated DC working voltage Post test requirements at +20°C Leakage current ≤ Initial specified value Capacitance change ≤ ± 20% of initial measured value tan ∂ ≤ 150% of initial specified value Test conditions Duration 500 hours Ambient temperature +85°C (None) Applied voltage Post test requirements at +20°C. Same limits for high temperature loading. 34 www.dubilier.co.uk CAPACITORS ALUMINIUM ELECTROLYTIC STANDARD RADIAL CEBM PERMISSIBLE RIPPLE CURRENT mA (rms) 85˚C/120Hz 6.3 10 16 65 75 100 110 170 190 210 330 300 330 530 620 990 1050 1150 1350 1700 1800 1900 2150 2250 2500 2680 2950 25 35 50 63 100 5 10 20 25 30 45 70 110 120 200 5 10 10 15 29 25 30 30 30 35 35 45 50 70 55 60 60 115 110 70 70 80 100 160 80 90 110 150 210 140 150 190 260 380 240 260 330 460 600 300 380 450 540 650 860 420 500 510 740 850 1100 740 950 1050 1350 1550 1350 1200 1500 1750 1850 2300 1200 1900 2220 2170 2100 2360 2400 2500 2500 2600 160 200 250 400 450 10 15 20 35 40 65 130 180 220 300 640 12 17 20 35 45 70 130 190 180 400 660 14 15 25 30 40 70 130 160 210 310 14 19 28 32 41 70 120 140 225 14 19 29 35 50 75 110 170 230 SECTION 1 Volts µF 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 OUTLINE DRAWING L+1 15 min Dø P dø 5 min P Vinyl Sleeve dø Dø ± 0.5 5 2.0 6.3 2.5 0.5 8 3.5 10 5.0 0.6 13 5.0 16 7.5 18 7.5 0.8 22 10.0 For smaller case size options refer to sales office and discuss CEBR. Dimensions in mm +0.5 35 www.dubilier.co.uk