NCP552, NCP553, NCV553 80 mA CMOS Low Iq NOCAP Voltage Regulator This series of fixed output NOCAP linear regulators are designed for handheld communication equipment and portable battery powered applications which require low quiescent. This series features an ultra−low quiescent current of 2.8 A. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits. The NCP552 series provides an enable pin for ON/OFF control. These voltage regulators have been designed to be used with low cost ceramic capacitors. The devices have the ability to operate without an output capacitor. The devices are housed in the micro−miniature SC82−AB surface mount package. Standard voltage versions are 1.5, 1.8, 2.5, 2.7, 2.8, 3.0, 3.3, and 5.0 V. Other voltages are available in 100 mV steps. http://onsemi.com 4 1 SC82−AB (SC70−4) SQ SUFFIX CASE 419C Features • Pb−Free Packages are Available* Low Quiescent Current of 2.8 A Typical Low Output Voltage Option Output Voltage Accuracy of 2.0% Industrial Temperature Range of −40°C to 85°C (NCV553, TA = −40°C to +125°C) NCP552 Provides an Enable Pin PIN CONNECTIONS & MARKING DIAGRAMS GND 1 4 Enable xxxM • • • • • Vin 2 3 Vout Typical Applications Battery Powered Consumer Products Hand−Held Instruments Camcorders and Cameras NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes (NCP552 Top View) GND 1 4 N/C xxxM • • • • Vin 2 3 Vout ON GND Enable (NCP553, NCV553 Top View) OFF Output Input Vin C1 xxx = Device Code M = Date Code Vout + + C2 ORDERING INFORMATION This device contains 32 active transistors See detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet. Figure 1. NCP552 Typical Application Diagram GND N/C Vin Vout Input Output C1 + + *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. C2 This device contains 32 active transistors Figure 2. NCP553 Typical Application Diagram Semiconductor Components Industries, LLC, 2004 September, 2004 − Rev. 5 1 Publication Order Number: NCP552/D NCP552, NCP553, NCV553 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ PIN FUNCTION DESCRIPTION NCP552 NCP553 Pin Name Description 1 1 GND 2 2 Vin Positive power supply input voltage. 3 3 Vout Regulated output voltage. 4 − Enable − 4 N/C Power supply ground. This input is used to place the device into low−power standby. When this input is pulled low, the device is disabled. If this function is not used, Enable should be connected to Vin. No internal connection. MAXIMUM RATINGS ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ Rating Symbol Value Unit Vin 12 V Enable −0.3 to Vin +0.3 V Output Voltage Vout −0.3 to Vin +0.3 V Power Dissipation and Thermal Characteristics Power Dissipation Thermal Resistance, Junction−to−Ambient PD RJA Internally Limited 400 W °C/W Operating Junction Temperature TJ +125 °C Operating Ambient Temperature NCP552, NCP553 NCV553 TA Storage Temperature Tstg Input Voltage Enable Voltage (NCP552 ONLY) °C −40 to +85 −40 to +125 −55 to +150 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL−STD−883, Method 3015 Machine Model Method 200 V 2. Latch up capability (85°C) 200 mA DC with trigger voltage. http://onsemi.com 2 NCP552, NCP553, NCV553 ELECTRICAL CHARACTERISTICS (Vin = Vout(nom.) + 1.0 V, Venable = Vin, Cin = 1.0 F, Cout = 1.0 F, TJ = 25°C, unless otherwise noted.) Characteristic Symbol Min Typ Max 1.455 1.746 2.425 2.646 2.744 2.94 3.234 4.900 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 1.545 1.854 2.575 2.754 2.856 3.06 3.366 5.100 1.455 1.746 2.425 2.619 2.716 2.910 3.201 4.900 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 1.545 1.854 2.575 2.781 2.884 3.09 3.399 5.100 Unit Output Voltage (TA = 25°C, Iout = 10 mA) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 5.0 V Vout Output Voltage (TA = −40°C to 85°C, Iout = 10 mA) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 5.0 V Vout Output Voltage (TA = −40°C, Iout = 10 mA) NCV553 −5.0 V Vout 4.900 5.0 5.100 V Output Voltage (TA = +125°C, Iout = 10 mA) NCV553 −5.0 V Vout 4.850 5.0 5.150 V Line Regulation (Vin = Vout + 1.0 V to 12 V, Iout = 10 mA) Regline − 2.0 4.5 mV/V Load Regulation (Iout = 1.0 mA to 80 mA, Vin = Vout + 2.0 V) Regload − 0.3 0.8 mV/mA Output Current (Vout = (Vout at Iout = 80 mA) −3.0%) 1.5 V−3.9 V (Vin = Vout(nom.) + 2.0 V) 4.0 V−5.0 V (Vin = 6.0 V) Io(nom.) 80 80 180 180 − − Dropout Voltage (TA = −40°C to 125°C, Iout = 80 mA, Measured at Vout −3.0%) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 5.0 V Vin−Vout Quiescent Current (Enable Input = 0 V) (Enable Input = Vin, Iout = 1.0 mA to Io(nom.), Vin = Vout +2.0 V) V V mA mV − − − − − − − − 1300 1100 800 750 730 680 650 470 1800 1600 1400 1200 1200 1000 1000 800 − − 0.1 2.8 1.0 6.0 100 100 300 300 450 450 − 90 − 1.3 − − − − 0.3 − 100 − A IQ Output Short Circuit Current (Vout = 0 V) 1.5 V−3.9 V (Vin = Vout(nom.) + 2.0 V) 4.0 V−5.0 V (Vin = 6.0 V) Iout(max) Output Voltage Noise (f = 20 Hz to 100 kHz, Iout = 10 mA) (Cout = 1.0 F) Vn Enable Input Threshold Voltage (NCP552 ONLY) (Voltage Increasing, Output Turns On, Logic High) (Voltage Decreasing, Output Turns Off, Logic Low) mA Vth(en) Output Voltage Temperature Coefficient TC V 3. Maximum package power dissipation limits must be observed. T TA PD J(max) RJA 4. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible. http://onsemi.com 3 Vrms ppm/°C NCP552, NCP553, NCV553 DEFINITIONS Load Regulation Line Regulation The change in output voltage for a change in output current at a constant temperature. The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse technique such that the average chip temperature is not significantly affected. Dropout Voltage The input/output differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 3.0% below its nominal. The junction temperature, load current, and minimum input supply requirements affect the dropout level. Line Transient Response Typical over and undershoot response when input voltage is excited with a given slope. Thermal Protection Internal thermal shutdown circuitry is provided to protect the integrated circuit in the event that the maximum junction temperature is exceeded. When activated at typically 160°C, the regulator turns off. This feature is provided to prevent failures from accidental overheating. Maximum Power Dissipation The maximum total dissipation for which the regulator will operate within its specifications. Quiescent Current The quiescent current is the current which flows through the ground when the LDO operates without a load on its output: internal IC operation, bias, etc. When the LDO becomes loaded, this term is called the Ground current. It is actually the difference between the input current (measured through the LDO input pin) and the output current. Maximum Package Power Dissipation The maximum power package dissipation is the power dissipation level at which the junction temperature reaches its maximum operating value, i.e. 125°C. Depending on the ambient power dissipation and thus the maximum available output current. http://onsemi.com 4 1 3.03 Vout(nom.) = 3.0 V 0.9 Vout, OUTPUT VOLTAGE (VOLTS) Vin − Vout, DROPOUT VOLTAGE (VOLTS) NCP552, NCP553, NCV553 0.8 0.7 80 mA 0.6 0.5 0.4 40 mA 0.3 0.2 0.1 0 −50 −25 0 25 50 75 100 Vout(nom.) = 3.3 V 3.025 Iout = 5 mA 3.02 3.01 3.005 3 −60 125 −20 −40 20 0 60 40 80 TEMPERATURE (C) TEMPERATURE (C) Figure 3. Dropout Voltage versus Temperature Figure 4. Output Voltage versus Temperature 3 2.75 2.5 2.25 2 1.75 −60 Vout(nom.) = 3 V Iout = 0 mA 4 3.5 3 2.5 2 1.5 1 0.5 0 −40 −20 0 20 40 60 80 100 0 2 TEMPERATURE (C) 3.5 3 2.5 OUTPUT VOLTAGE DEVIATION (mV) 10 mA 1.5 50 mA 0.5 0 10 100 1000 10000 8 6 10 12 Figure 6. Quiescent Current versus Input Voltage Vin, INPUT VOLTAGE (V) 4 2 4 Vin, INPUT VOLTAGE (VOLTS) Figure 5. Quiescent Current versus Temperature 1 100 4.5 Iout = 0 mA Vin = 4 V Iq, QUIESCENT CURRENT (A) Iq, QUIESCENT CURRENT (A) Vin = 4 V 3.015 3.25 OUTPUT NOISE (V/Hz) Vin = 12 V 100000 1000000 6 Iout = 1 mA Cout = 1 F 5 4 200 100 0 −100 0 0.5 1 1.5 2 2.5 3 3.5 FREQUENCY (Hz) TIME (s) Figure 7. Output Noise Density Figure 8. Line Transient Response http://onsemi.com 5 4 4.5 Vin = 4 V Cout = 10 F 400 200 ENABLE VOLTAGE (V) 200 0 −200 0 Vin = 4 V Cout = 10 F −400 Iout, OUTPUT CURRENT (V) 150 100 50 0 100 50 0 −50 0 OUTPUT VOLTAGE (V) OUTPUT VOLTAGE DEVIATION (mV) 600 10 20 30 40 0 50 0.5 1 1.5 2 TIME (ms) TIME (ms) Figure 9. Load Transient Response Figure 10. Load Transient Response 3.5 Vout, OUTPUT VOLTAGE (VOLTS) Iout, OUTPUT CURRENT (mA) OUTPUT VOLTAGE DEVIATION (mV) NCP552, NCP553, NCV553 5 0 3 2 Iout = 10 mA Cin = 1 F Cout = 0.1 F Vin = 4 V 1 0 0 100 200 300 400 3 2.5 2 1.5 1 Cin = 1 F Cout = 1 F TA = 25 C 0.5 0 500 600 700 0 2 4 6 8 10 12 TIME (s) Vin, INPUT VOLTAGE (VOLTS) Figure 11. Turn−On Response (NCP552 ONLY) Figure 12. Output Voltage versus Input Voltage http://onsemi.com 6 NCP552, NCP553, NCV553 APPLICATIONS INFORMATION A typical application circuit for the NCP552 series and NCP553 series is shown in Figure 1 and Figure 2, front page. chance to pick up noise or cause the regulator to malfunction. Set external components, especially the output capacitor, as close as possible to the circuit, and make leads as short as possible. Input Decoupling (C1) A 1.0 F capacitor either ceramic or tantalum is recommended and should be connected close to the package. Higher values and lower ESR will improve the overall line transient response. If large line or load transients are not expected, then it is possible to operate the regulator without the use of a capacitor. TDK capacitor: C2012X5R1C105K, or C1608X5R1A105K Thermal As power across the NCP552 and NCP553 increases, it might become necessary to provide some thermal relief. The maximum power dissipation supported by the device is dependent upon board design and layout. Mounting pad configuration on the PCB, the board material and also the ambient temperature effect the rate of temperature rise for the part. This is stating that when the devices have good thermal conductivity through the PCB, the junction temperature will be relatively low with high power dissipation applications. The maximum dissipation the package can handle is given by: Output Decoupling (C2) The NCP552 and NCP553 are very stable regulators and do not require any specific Equivalent Series Resistance (ESR) or a minimum output current. If load transients are not to be expected, then it is possible for the regulator to operate with no output capacitor. Otherwise, capacitors exhibiting ESRs ranging from a few m up to 10 can thus safely be used. The minimum decoupling value is 0.1 F and can be augmented to fulfill stringent load transient requirements. The regulator accepts ceramic chip capacitors as well as tantalum devices. Larger values improve noise rejection and load regulation transient response. TDK capacitor: C2012X5R1C105K, C1608X5R1A105K, or C3216X7R1C105K T TA PD J(max) RJA If junction temperature is not allowed above the maximum 125°C, then the NCP552 and NCP553 can dissipate up to 250 mW @ 25°C. The power dissipated by the NCP552 and NCP553 can be calculated from the following equation: Enable Operation (NCP552 ONLY) Ptot [Vin * Ignd (Iout)] [Vin Vout] * Iout The enable pin will turn on the regulator when pulled high and turn off the regulator when pulled low. These limits of threshold are covered in the electrical specification section of this data sheet. If the enable is not used then the pin should be connected to Vin. or P Vout * Iout VinMAX tot Ignd Iout If an 80 mA output current is needed then the ground current from the data sheet is 2.8 A. For an NCP552 or NCP553 (3.0 V), the maximum input voltage will then be 6.12 V. Hints Please be sure the Vin and GND lines are sufficiently wide. When the impedance of these lines is high, there is a http://onsemi.com 7 NCP552, NCP553, NCV553 ORDERING INFORMATION Nominal Output Voltage (Note 5) Marking NCP552SQ15T1 NCP552SQ18T1 NCP552SQ25T1 NCP552SQ27T1 NCP552SQ28T1 NCP552SQ30T1 NCP552SQ33T1 NCP552SQ50T1 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 LAW LAX LAY LAZ LBA LBB LBC LBD NCP553SQ15T1 NCP553SQ18T1 NCP553SQ25T1 NCP553SQ27T1 NCP553SQ28T1 NCP553SQ30T1 NCP553SQ33T1 NCP553SQ50T1 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 LBE LBF LBG LBH LBI LBJ LBK LBL NCP553SQ15T1G NCP553SQ30T1G 1.5 3.0 LBE LBJ (Pb−Free) NCV553SQ50T1 (Note 6) 5.0 LFT SC82−AB (SC70−4) Device Package Shipping† SC82 AB SC82−AB (SC70−4) 3000 Units/ 8″ Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 5. Additional voltages in 100 mV steps are available upon request by contacting your ON Semiconductor representative. 6. Automotive qualified. http://onsemi.com 8 NCP552, NCP553, NCV553 PACKAGE DIMENSIONS SC82−AB (SC70−4) SQ SUFFIX CASE 419C−02 ISSUE C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. 419C−01 OBSOLETE. NEW STANDARD IS 419C−02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. A G C D 3 PL N 4 3 1 2 K B S F L H J 0.05 (0.002) http://onsemi.com 9 DIM A B C D F G H J K L N S MILLIMETERS MIN MAX 1.8 2.2 1.15 1.35 0.8 1.1 0.2 0.4 0.3 0.5 1.1 1.5 0.0 0.1 0.10 0.26 0.1 −−− 0.05 BSC 0.2 REF 1.8 2.4 INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.008 0.016 0.012 0.020 0.043 0.059 0.000 0.004 0.004 0.010 0.004 −−− 0.002 BSC 0.008 REF 0.07 0.09 NCP552, NCP553, NCV553 NOCAP is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 10 For additional information, please contact your local Sales Representative. NCP552/D