NonEnvironmental Backshells AS85049/29 Non-Environmental Strain Relief Backshells Glenair Connector Designator F MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309 M85049/29 10 N 03 A Basic Part No. Shell Size Finish A = Black Anodize N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab Over Electroless Nickel A Thread Cable Range B TABLE I Clamp Size A Thread (Table II) Class 2B Min Max 01 02 .438 - 28 UNEF 01 03 .562 - 24 UNEF 02 04 .688 - 24 UNEF 02 05 .813 - 20 UNEF 02 06 .938 - 20 UNEF 03 07 1.063 - 18 UNEF 03 08 1.188 - 18 UNEF 03 09 1.313 - 18 UNEF 04 10 1.438 - 18 UNEF Clamp Size 1.312 (33.3) Max Length Shell Size Shell Series I Ref. Size 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 Length Code (Omit for Standard) E TABLE II B Dia +.000 (0.0) -.062 (1.6) .567 (14.4) .704 (17.9) .829 (21.1) .954 (24.2) 1.079 (27.4) 1.203 (30.6) 1.329 (33.8) 1.454 (36.9) 1.579 (40.1) Clamp Size 01 02 03 04 05 06 07 08 09 10 Cable Range Min Max .062 (1.6) .125 (3.2) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) .437 (11.1) .625 (15.9) .562 (14.3) .750 (19.1) .687 (17.4) .875 (22.2) .812 (20.6) 1.000 (25.4) .937 (23.8) 1.125 (28.6) 1.062 (27.0) 1.250 (31.8) E Max .781 (19.8) .969 (24.6) 1.062 (27.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) TABLE III 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Length Available Code Shell Sizes 08 - 24 Std. 08 - 24 A 14 - 24 B 20 - 24 C Length 1.00 (25.4) 2.00 (50.8) 3.00 (76.2) 4.00 (101.6) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 36-5