EMI/RFI Non-Env. Backshells AS85049/36 EMI/RFI Non-Environmental Backshell M85049/36 10 N 03 A Glenair Connector Designator F Length Code (Omit for Standard) Basic Part No. MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309 Shell Size Clamp Size Finish N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab Over Electroless Nickel Length 1.312 (33.3) Max A Thread Cable Range B TABLE I Shell Size Clamp Size Shell Series I (Table IV) Min Max Size Ref. 01 02 08 09 01 03 10 11 02 04 12 13 02 05 14 15 02 06 16 17 03 07 18 19 03 08 20 21 03 09 22 23 04 10 24 25 E TABLE II A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF B Dia Max .65 (16.5) .77 (19.6) .89 (22.6) 1.02 (25.9) 1.15 (29.2) 1.23 (31.2) 1.36 (34.5) 1.48 (37.6) 1.73 (43.9) Clamp Cable Range Size Min Max 01 .062 (1.6) .125 (3.2) 02 .125 (3.2) .250 (6.4) 03 .250 (6.4) .375 (9.5) 04 .312 (7.9) .500 (12.7) 05 .437 (11.1) .625 (15.9) 06 .562 (14.3) .750 (19.1) 07 .687 (17.4) .875 (22.2) 08 .812 (20.6) 1.000 (25.4) 09 .937 (23.8) 1.125 (28.6) 10 1.062 (27.0) 1.250 (31.8) E Max .781 (19.8) .969 (24.6) 1.062 (27.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) TABLE III 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Length Code Std. A B C Available Shell Sizes 08 - 24 08 - 24 14 - 24 20 - 24 Length 1.50 (38.1) 2.50 (63.5) 3.50 (88.9) 4.50 (114.3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 38-14