HITRON HVP100-23 Universal input harmonic correction ac-dc open frame single & multi-output 100 watts internal switching power supply Datasheet

H HiTRON
UNIVERSAL INPUT HARMONIC CORRECTION
AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS
INTERNAL SWITCHING POWER SUPPLIES HVP100 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
MEET IEC 61000-3-2 HARMONIC CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac with PFC.
Input Connector: B-S connector.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 20A @230Vac (active).
Input Current: 1.6A@115Vac, 0.6A@230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR PUB. 22 Class B.
Hold-up Time: Typ. 30mS @ 115Vac & 230Vac.
Power Fail Signal: Installed.
Power Factor Correction: Meet Harmonic Correction
per IEC 61000-3-2.PF typ. 0.98.
Earth Leakage: Less than 0.5mA.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: B-S connector.
Output Wattage: Typ. 100 Watts.
Line Regulation: Typ. 1.0%.
Load Regulation: Main VO1 typ. ±1.0%.
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at main VO1 only.
Remote Sense: Installed in VO1.
Adjustability: Available at main O/P VO1.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 74-79%.
Switching Frequency: Fixed frequency at 85 or 80K Hz.
Circuit Topology: PWM fixed frequency forward circuit.
Transient Response: Output voltage returns in
less than 3mS following
a 25% load change.
Safety Standard: UL 60950-1/EN 60950-1 Class I.
Operating Temperature: 0 to +50°C.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: Typ. 0.04% /°C.
Cooling: Free air convection.
Recommended 20cfm fan cooling for full load.
Construction: Enclosure box or L-bracket format.
Power Density: 2.16Watts / Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
For the details of safety approval, please consult the factory.
-43-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
DUAL OUTPUT
SINGLE OUTPUT
MODEL NO.
HVP100-10
HVP100-11
HVP100-12
HVP100-13
HVP100-14
HVP100-15
HVP100-17
HVP100-19
HVP100- 21
HVP100- 22
HVP100- 23
HVP100- 291
HVP100- 292
HVP100- 293
MAIN VO1 @
Typ.
Volt.
12.0A
+5.0V
12.0A
+5.0V
12.0A
+5.0V
12.0A
+5.0V
12.0A
+3.3V
12.0A
+3.3V
12.0A
+3.3V
AUX. VO2 †■
Typ.
Volt.
3.0A
+12V
3.0A
+12V
1.5A
+24V
3.0A
+15V
3.0A
+12V
3.0A
+15V
1.5A
+24V
MODEL NO.
AUX. VO2 †■
Typ.
Volt.
4.0A
+12V
3.2A
+15V
2.0A
+24V
4.0A
+12V
3.2A
+15V
2.0A
+24V
MIAN VO1 @
Typ.
Volt.
10.0A
+5.0V
10.0A
+5.0V
10.0A
+5.0V
15.0A
+3.3V
15.0A
+3.3V
15.0A
+3.3V
MAIN VO1 @ #
Typ.
Volt.
20.0A
5.0V
8.5A
12.0V
7.0A
15.0V
4.5A
24.0V
4.0A
28.0V
3.0A
36.0V
2.1A
48.0V
25.0A
3.3V
TRIPLE OUTPUT
MODEL NO.
HVP100- 30
HVP100- 31
HVP100- 32
HVP100- 33
HVP100- 392
HVP100- 393
HVP100- 394
AUX. ±VO3
Typ.
Volt.
0.8A
12V
0.8A
5V
0.8A
12V
0.3A
15V
0.8A
12V
0.3A
15V
0.8A
12V
Symbol: " " OVP built-in. "@" Adjustable. "±" Positive or Negative selectable (factory set). "#" Remote sensing.
"■" Coupled choke. " " Installed with Post Regulator (P.R.). "†" Stacked on main output.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: L-B 706.0g (24.9 Oz.)
Box 795.0g (28.0 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
SINGLE OUTPUT
DUAL OUTPUT
TRIPLE OUTPUT
ASSORTED SIGNALS
ASSIGNMENT
AC-L
AC-N
AC-G
VO1
DC-COM
VO1
VO2
DC-COM
VO1
VO2
VO3
DC-COM
-SENSING
+SENSING
P.F
DC-COM
CNTR & PIN #
P1-1
P1-2
P1-3
P1-4,5
P1-6.7
P1-4
P1-6
P1-5
P1-4
P1-6
P1-7
P1-5
P2-4
P2-3
P2-2
P2-1
Mating connector: P1: Non, Screw on Top. P2: Molex 5051 or equivalent.
-44-
Similar pages