JH- / JHS-139 Quadrature Hybrid, 250 - 500 MHz Rev. V3 Features FP-2 (JH-139) • • • • • Octave Bandwidth Low VSWR: 1.1:1 Typical High Isolation: 30 dB Typical Impedance: 50 Ohms Nominal Input Power: 4 Watts Max.@ 25°C, Derated to 1 Watt @ 85oC • MIL-STD-202 Screening Available Description 3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90o or 180o phase differential and for Quadrature combining or performing summation/differential combining. SF-1 (JHS-139) Pin Configuration (JH-139) Pin No. Function Pin No. Function 1 A 5 D 2 GND 6 GND 3 GND 7 GND 4 B 8 C Pin Configuration (JHS-139) Pin No. Function Pin No. Function 1 A 3 D 2 B 4 C 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. JH- / JHS-139 Quadrature Hybrid, 250 - 500 MHz Rev. V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Less Coupling 250 - 500 MHz dB — — 0.5 Isolation — 250 - 500 MHz dB 15 — — Amplitude Balance — 250 - 500 MHz dB — — 1.0 VSWR — 250 - 500 MHz Ratio — — 1.5:1 Deviation from Quadrature — 250 - 500 MHz ° — — 4 Insertion Loss 2 1. All specifications apply with 50 ohm source and load impedance. 2. Average of coupled output less 3 dB. This product contains elements protected by United States Patent Number 3,484,724 Phasing Diagram OUT A Typical Performance Curves B C D ISO 0° -90° -90° 0° IN A B ISO C 0° 90° D -90° 0° ISO ISO 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. JH- / JHS-139 Quadrature Hybrid, 250 - 500 MHz Rev. V3 Typical Performance Curves Ordering Information Part Number Package JH-139 PIN FP-2 JHS-139 PIN SF-1 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.