IDT IDT74ALVC16244A 3.3v cmos 16-bit buffer/driver Datasheet

IDT74ALVC16244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
IDT74ALVC16244A
3.3V CMOS 16-BIT
BUFFER/DRIVER WITH
3-STATE OUTPUTS
FEATURES:
DESCRIPTION:
• 0.5 MICRON CMOS Technology
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
• VCC = 3.3V ± 0.3V, Normal Range
• VCC = 2.7V to 3.6V, Extended Range
• VCC = 2.5V ± 0.2V
μ W typ. static)
• CMOS power levels (0.4μ
• Rail-to-Rail output swing for increased noise margin
• Available in TSSOP package
This 16-bit buffer/driver is built using advanced dual metal CMOS
technology. The ALVC16244A is designed specifically to improve the
performance and density of 3-state memory address drivers, clock drivers,
and bus-oriented receivers and transmitters. The device can be used as
four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true
outputs and symmetrical active-low output-enable (OE) inputs.
The ALVC16244A has been designed with a ±24mA output driver. This
driver is capable of driving a moderate to heavy load while maintaining
speed performance.
DRIVE FEATURES:
APPLICATIONS:
• High Output Drivers: ±24mA
• Suitable for heavy loads
• 3.3V high speed systems
• 3.3V and lower voltage computing systems
FUNCTIONAL BLOCK DIAGRAM
25
1OE
1
1A1
47
2
1Y1
3A1
36
13
1A2
46
3
1Y2
3A2
35
14
3Y2
1A3
44
5
1Y3
3A3
33
16
3Y3
43
6
1Y4
3A4
32
17
3Y4
1A4
3OE
2OE
48
2A1
41
8
2A2
40
9
2A3
38
11
2A4
37
12
3Y1
4OE
24
2 Y1
4A1
30
19
4Y1
2Y2
4A2
29
20
4Y2
2Y3
4A3
27
22
4Y3
2Y4
4A4
26
23
4Y4
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
JUNE 2009
1
© 2009 Integrated Device Technology, Inc.
DSC-4698/6
IDT74ALVC16244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS(1)
PIN CONFIGURATION
1OE
1
48
2OE
1Y1
2
47
1A1
Symbol
Description
VTERM(2)
Max
Unit
VTERM(3)
Terminal Voltage with Respect to GND
–0.5 to +4.6
V
Terminal Voltage with Respect to GND
–0.5 to VCC+0.5
V
TSTG
Storage Temperature
–65 to +150
°C
IOUT
DC Output Current
–50 to +50
mA
IIK
Continuous Clamp Current,
VI < 0 or VI > VCC
±50
mA
IOK
Continuous Clamp Current, VO < 0
–50
mA
ICC
ISS
Continuous Current through each
VCC or GND
±100
mA
1Y2
3
46
1A2
GND
4
45
GND
1Y3
5
44
1A3
1Y4
6
43
1A4
VCC
7
42
VCC
2Y1
8
41
2A1
2Y2
9
40
2A2
10
39
GND
2Y3
11
38
2A3
2Y4
12
37
2A4
3Y1
13
36
3A1
CIN
Input Capacitance
VIN = 0V
5
7
pF
3Y2
14
35
3A2
COUT
Output Capacitance
VOUT = 0V
7
9
pF
GND
15
34
GND
COUT
I/O Port Capacitance
VIN = 0V
7
9
pF
3Y3
16
33
3A3
3Y4
17
32
3A4
VCC
18
31
VCC
4Y1
19
30
4A1
4Y2
20
29
4A2
GND
21
28
GND
GND
4Y3
22
27
4A3
4Y4
23
26
4A4
4OE
24
25
3OE
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. All terminals except VCC.
CAPACITANCE (TA = +25°C, F = 1.0MHz)
Parameter(1)
Symbol
Conditions
Typ.
Max.
NOTE:
1. As applicable to the device type.
PIN DESCRIPTION
Pin Names
Description
xOE
3-State Output Enable Inputs (Active LOW)
xAx
Data Inputs
xYx
3-State Outputs
FUNCTION TABLE(1)
TSSOP
TOP VIEW
Inputs
xOE
xAx
xYx
L
H
H
L
L
L
H
X
Z
NOTE:
1. H = HIGH Voltage Level
X = Don’t Care
L = LOW Voltage Level
Z = High-Impedance
2
Outputs
Unit
IDT74ALVC16244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Operating Condition: TA = –40°C to +85°C
Symbol
VIH
VIL
Min.
Typ.(1)
Max.
Unit
VCC = 2.3V to 2.7V
1.7
—
—
V
VCC = 2.7V to 3.6V
2
—
—
VCC = 2.3V to 2.7V
—
—
0.7
VCC = 2.7V to 3.6V
—
—
0.8
Parameter
Input HIGH Voltage Level
Input LOW Voltage Level
Test Conditions
V
IIH
Input HIGH Current
VCC = 3.6V
VI = VCC
—
—
±5
µA
IIL
Input LOW Current
VCC = 3.6V
VI = GND
—
—
±5
µA
IOZH
High Impedance Output Current
VCC = 3.6V
VO = VCC
—
—
±10
µA
IOZL
(3-State Output pins)
VO = GND
—
—
±10
VIK
Clamp Diode Voltage
VCC = 2.3V, IIN = –18mA
—
–0.7
–1.2
V
VH
ICCL
ICCH
ICCZ
ΔICC
Input Hysteresis
Quiescent Power Supply Current
VCC = 3.3V
VCC = 3.6V
VIN = GND or VCC
—
—
100
0.1
—
40
mV
µA
Quiescent Power Supply Current
Variation
One input at VCC - 0.6V, other inputs at VCC or GND
—
—
750
µA
NOTE:
1. Typical values are at VCC = 3.3V, +25°C ambient.
OUTPUT DRIVE CHARACTERISTICS
Symbol
VOH
VOL
Test Conditions(1)
Parameter
Output HIGH Voltage
Output LOW Voltage
Min.
Max.
Unit
V
VCC = 2.3V to 3.6V
IOH = – 0.1mA
VCC – 0.2
—
VCC = 2.3V
IOH = – 6mA
2
—
VCC = 2.3V
IOH = – 12mA
1.7
—
VCC = 2.7V
2.2
—
VCC = 3V
2.4
—
VCC = 3V
IOH = – 24mA
2
—
VCC = 2.3V to 3.6V
IOL = 0.1mA
—
0.2
VCC = 2.3V
IOL = 6mA
—
0.4
IOL = 12mA
—
0.7
VCC = 2.7V
IOL = 12mA
—
0.4
VCC = 3V
IOL = 24mA
—
0.55
V
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C.
3
IDT74ALVC16244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
OPERATING CHARACTERISTICS, TA = 25°C
Symbol
Parameter
CPD
Power Dissipation Capacitance Outputs enabled
CPD
Power Dissipation Capacitance Outputs disabled
VCC = 2.5V ± 0.2V
VCC = 3.3V ± 0.3V
Test Conditions
Typical
Typical
Unit
CL = 0pF, f = 10Mhz
16
19
pF
4
5
SWITCHING CHARACTERISTICS(1)
VCC = 2.5V ± 0.2V
Symbol
Parameter
tPLH
Propagation Delay
tPHL
xA to xBx
tPZH
Output Enable Time
tPZL
OE to xBx
tPHZ
Output Disable Time
tPLZ
OE to xBx
tSK(o)
Output Skew(2)
VCC = 3.3V ± 0.3V
Max.
Min.
Max.
Min.
Max.
Unit
1
4.4
—
4
1
3.6
ns
1
6.3
—
6
1
5
ns
1
5.8
—
5.2
1
5
ns
—
—
—
—
—
500
ps
NOTES:
1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C.
2. Skew between any two outputs of the same package and switching in the same direction.
4
VCC = 2.7V
Min.
IDT74ALVC16244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
TEST CIRCUITS AND WAVEFORMS
TEST CONDITIONS
VCC(1)= 3.3V±0.3V VCC(1)= 2.7V
Symbol
VIH
VT
0V
VOH
VT
VOL
SAME PHASE
INPUT TRANSITION
VCC(2)= 2.5V±0.2V
Unit
VLOAD
6
6
2 x Vcc
V
VIH
2.7
2.7
Vcc
V
VT
1.5
1.5
Vcc / 2
V
VLZ
300
300
150
mV
VHZ
300
300
150
mV
CL
50
50
30
pF
tPLH
tPHL
tPLH
tPHL
OUTPUT
VIH
VT
0V
OPPOSITE PHASE
INPUT TRANSITION
ALVC Link
Propagation Delay
VLOAD
VCC
Open
(1, 2)
VIN
CONTROL
INPUT
VOUT
Pulse
Generator
DISABLE
ENABLE
GND
500Ω
D.U.T.
tPZL
VLOAD/2
OUTPUT
SWITCH
VT
NORMALLY CLOSED
LOW
tPHZ
tPZH
OUTPUT
SWITCH
NORMALLY
VT
OPEN
HIGH
0V
500Ω
RT
tPLZ
CL
ALVC Link
Test Circuit for All Outputs
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
VIH
VT
0V
VLOAD/2
VOL + VLZ
VOL
VOH
VOH - VHZ
0V
ALVC Link
Enable and Disable Times
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
NOTES:
1. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2ns; tR ≤ 2ns.
DATA
INPUT
SWITCH POSITION
tSU
VIH
VT
0V
VIH
VT
0V
VIH
VT
0V
VIH
VT
0V
tH
TIMING
INPUT
Test
Switch
Open Drain
Disable Low
Enable Low
VLOAD
ASYNCHRONOUS
CONTROL
Disable High
Enable High
GND
SYNCHRONOUS
CONTROL
All Other Tests
Open
tREM
tSU
tH
ALVC Link
INPUT
OUTPUT 1
tPLH1
VIH
VT
0V
tPHL1
tSK (x)
tSK (x)
OUTPUT 2
tPLH2
Set-up, Hold, and Release Times
VOH
VT
VOL
LOW-HIGH-LOW
PULSE
VOH
VT
VOL
HIGH-LOW-HIGH
PULSE
tW
VT
ALVC Link
tPHL2
Pulse Width
tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1
Output Skew - tSK(X)
VT
ALVC Link
NOTES:
1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs.
2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank.
5
IDT74ALVC16244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
XX
ALVC
X
Bus-Hold
Temp. Range
XX
Family
XXX
XX
Device Type Package
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
PAG
Green - Thin Shrink Small Outline Package
244A
16-Bit Buffer/Driver with 3-State Outputs
16
Double-Density, ±24mA
Blank
No Bus-Hold
74
– 40°C to +85°C
for SALES:
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
6
for Tech Support:
[email protected]
Similar pages