MBR2040 Voltage 40 V 20.0 Amp Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen free TO-220J FEATURES Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any REF. 1 2 3 A B C D E F G H Millimeter Min. Max. 10.010 10.350 3.735 3.935 2.590 2.890 12.060 12.460 1.170 1.370 0.710 0.910 13.400 13.800 2.540 TYP. REF. I J K L M N Q Millimeter Min. Max. 4.980 5.180 3.560 3.960 4.470 4.670 1.200 1.400 8.500 8.900 2.520 2.820 0.330 0.650 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise s pecified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameter Symbol Rating Unit Working Peak Reverse Voltage VRRM VRWM 40 40 V V Maximum DC Blocking Voltage VDC 40 10 V Maximum Recurrent Peak Reverse Voltage Maximum Average Forward Rectified Current (Per Leg) IF (Per Device) A 20 Peak Forward Surge Current, 8.3 ms single half sine-wave IFSM 150 A Power dissipation PD 2 W Typical Thermal Resistance RθJA 50 °C /W Typical Thermal Resistance RθJC 2 °C /W TJ,TSTG 150, -55~150 °C Operating and Storage Temperature Range ELECTRICAL CHARACTERISTICS Parameter Symbol MIN. Typ. Max. Unit Reverse voltage Maximum Instantaneous Forward Voltage Maximum DC Reverse Current 2 at Rated DC Blocking Voltage 1 Typical Junction Capacitance VBR VF 40 - 0.55 0.60 V V IR - - 0.1 mA CJ - 440 - pF Test Condition IR=0.1mA IF=10A VR=40V NOTES: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2. Pulse Test：Pulse Width = 300 µs, Duty Cycle ≦ 2.0%. http://www.SeCoSGmbH.com/ 28-Apr -2014 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 MBR2040 Elektronische Bauelemente Voltage 40 V 20.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 28-Apr -2014 Rev. A Any changes of specification will not be informed individually. Page 2 of 2