Minmax AKF-15 Ac/dc power module 15w fully encapsulated plastic case Datasheet

AKF-15 SERIES
AC/DC Power Module 15W
FEATURES
►Fully encapsulated Plastic Case
►Single-, Dual- and Triple Output Models
►3 Mounting Versions:
- PCB Mounting with Solder Pins
- Chassis Mounting with Screw Terminals
- DIN-Rail Mounting
►Universal Input 85-264 VAC, 47- 440 Hz
►Protection Class ll
►Safety Approval to cUL/UL/IEC/EN 60950-1
►UL508 Approval (Option)
►Over Load and Over Voltage Protection
►3 Year Product Warranty
PRODUCT OVERVIEW
The MINMAX AKF-15 series is a new range of fully encapsulated AC/DC power supply modules.The product features EMI-filter to EN55022, class B and
EMS compliance to EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for
applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508
approval.The AKF-15 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment.
Model Selection Guide
Model Number PCB Mounting
Output
(For model with Chassis
Voltage
Output Current
Input Current
115VAC, 60Hz
@Max. Load
@No Load
mA(typ.)
mA(typ.)
Max. capacitive
Efficiency
Load
μF
(typ.)
@Max. Load
%
VDC
Max.
mA
AKF-15S05
5
3000
290
30
3900
75
AKF-15S12
12
1250
275
30
2200
79
AKF-15S15
15
1000
275
30
2200
79
AKF-15S24
24
625
275
30
1000
79
AKF-15S48
48
310
273
30
680
79
AKF-15D12
±12
±650
275
30
#1500
79
AKF-15D15
±15
±500
275
30
#1500
79
302
30
290
30
284
30
Mounting, add suffix C)
AKF-15D512
AKF-15T512
AKF-15T515
5
1500
*12
625
5
2000
*12
200
*-12
-200
*5
2000
*15
150
*-15
-150
* Output voltage accuracy 4% max.
2000
1500
2200
1500
1500
2200
1500
1500
# For each output
72
74
74
Input Specifications
Parameter
Input Voltage Range
Input Frequency Range
Input Voltage Range
Model
All Models
115VAC
230VAC
Inrush Current (Cold Start at 25℃)
E-mail:[email protected]
2012/11/14 REV:19
Tel:886-6-2923150
Page 1 of 5
Min.
85
47
120
-----
Typ.
-----------
Max.
264
440
370
15
30
Unit
VAC
Hz
VDC
A
A
AKF-15 SERIES
AC/DC POWER MODULE 15W
Output Specifications
Conditions
Parameter
Output Voltage Accuracy
Line Regulation
Iout=Min. to Max.
Load Regulation
Vo1
Vo2
Vo3
Cross RegulationDual Positives / Triple Output
Vin=Min. to Max.
Single Output Models
Dual/ Triple Output Models
Measured output Io = 20% to 100% of rated load
Other output(s) set at 50% of rated load
5VDC Output Models
Other Output Models
Ripple & Noise (20MHz)
Minimum Load
Over Voltage Protection
Temperature Coefficient
Overshoot
Zener diode clamp
Min.
---------------------------
Foldback, auto-recovery
105
(long term overload condition may cause damage)
Hiccup mode, indefinite (automatic recovery)
Current Limitation
Short Circuit Protection
Typ.
±1.0
±0.5
±0.5
±2.5
±1.0
±2.5
±2.5
1.5
0.8
10
120
±0.01
---
Max.
±2.0
±1.0
±1.0
±5.0
------1.8
1.0
----±0.02
5
Unit
%
%
%
%
%
%
%
%VPP of Vo
%VPP of Vo
%Inom.
% of Vo
%/℃
% Vout
---
---
%Inom.
General Specifications
Conditions
Input to Output, 60 Seconds
500 VDC
Parameter
I/O Isolation Voltage
I/O Isolation Resistance
Switching Frequency
Hold-up Time
MTBF (calculated)
EMC Emission
MIL-HDBK-217F@25℃, Ground Benign
Conducted and radiated
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EMC Immunity according
EN61000-6-1
EN61000-4-6
EN61000-4-8
EN61000-4-11
Protection Class II
Safety Approvals
Min.
Typ.
Max.
Unit
3000
----VACrms
100
----MΩ
--100
--KHz
--20
--ms
280,000
----Hours
EN 55011 class B, EN 55022 class B, FCC part 15 class B
Specification Requirement
Performance Criteria
B
Air ±8KV Cont. ±4KV
A
80~1000MHz, 10V/m 80% AM, 1KHz modulation
B
AC port ±2KV DC, SL, TL ±2KV not less than 1 min.
B
1.2/50uS(8/20uS) AC dif. ±1KV DC ±0.5KV
0.15~80MHz, 10Vrms (functional earth ports included)
B
80% AM, 1KHz modulation
A
50Hz/60Hz, 30A/m
B
30%, 10ms
C
60%, 100ms, 95%, 5000ms
According IEC/EN 60536
cUL/UL 60950-1,IEC/EN 60950-1
(UL508 for models with order code suffix ICE only)
Input Fuse
All Models
2A / 250VAC
1.5A Slow – Blow Type
Built-in Fuse
External Fuse (Recommended)
Environmental Specifications
Parameter
Temperature Range (operational)
Power Derating
Storage Temperature Range
Over Temperature Protection
Cooling
Humidity (non condensing)
E-mail:[email protected]
2012/11/14 REV:19
Ambient
+50℃ to +70℃
Conditions
-25℃
-40℃
at 90℃ (automatic recovery at 67℃)
Free-Air convection
---
Tel:886-6-2923150
Page 2 of 5
+70℃
0.563W / ℃
+85℃
95 % rel. H
AKF-15 SERIES
AC/DC POWER MODULE 15W
Notes
1
All Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted.
2
Ripple & Noise measurement bandwidth is 0~20 MHz
3
These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power
4
Other input and output voltage may be available, please contact factory.
5
To order the module with chassis mount package, please add a suffix C (e.g. AKF-15S05C).
supplies however they may not meet all listed specifications.
6
To order the module with UL508 safety, please add a suffix ICE (e.g. AKF-15S05ICE).
7
Part number for DIN-Rail mounting bracket: AC-DIN-01
8
Specifications are subject to change without notice
Package Specifications PCB Mounting
Mechanical Dimensions
Pin Connections
6.0 [0.24]
8.89
[0.35]
8.89
[0.35]
11.43
[0.45]
11.43
[0.45]
19.5 [0.77]
Pin
Single
0.7 [0.03]
Dual
(D12,D15)
1
3
[0.28]
7.1
[0.28]
2
4
-Vout
-Vout
-Vout2
Common
5
No Pin
Common
+Vout2
+Vout2
6
+Vout
+Vout
-Vout1
-Vout1
+Vout1
+Vout1
1
7
►All
20.32 [0.80]
No Pin
dimensions in mm (inches)
►Tolerance: ±0.5
54.0 [2.13]
►Pin
Physical Characteristics
Case Size
:
Case Material
:
Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Pin Material
:
Copper Alloy with Gold Plate Over Nickel Subplate
Weight
:
174g
74.0x54.0x19.5mm (2.91x2.13x0.77 inches)
E-mail:[email protected]
2012/11/14 REV:19
No Pin
5.0 [0.20]
46.0 [1.81]
Bottom View
3
74.0 [2.91]
39.8 [1.57]
7.1
62.0 [2.44]
Mounting M4.0 Thread
AC(L) – AC Line
0.04]
4
1.0 [
5
6
Tel:886-6-2923150
Page 3 of 5
Triple
AC(N) – AC Neutral
2
7
Dual
(D512)
(±0.02)
diameter  1.0 ±0.1 (0.04±0.004)
-Vout3
AKF-15 SERIES
AC/DC POWER MODULE 15W
Package Specifications Chassis Mounting (order code suffix C)
Mechanical Dimensions
Connections
3.5
7
6
5
4
3
Indication LED
2
Top view
1
54.0 [2.13]
Terminal
46.0 [1.81]
4x
23.3 [0.92]
5.0 [0.20]
16.8 [0.66]
:
Case Material
:
96.0x54.0x23.3mm (3.78x2.13x0.92 inches)
Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Weight
:
162g
Package Specifications with DIN Rail Mounting Bracket (order code AC-DIN-01)
Mechanical Dimensions
2
1
54.0 [2.13]
Indication LED
46.0 [1.81]
3.5
Top view
POWER"GOOD"INDICATOR
86.0 [3.39]
96.0 [3.78]
23.3 [0.92]
11.0 [0.43]
3.0 [0.12]
5.0
[0.20]
10.0 [0.39]
16.8 [0.66]
76.0 [2.99]
Physical Characteristics
Case Size
:
Case Material
:
96.0x54.0x23.3mm (3.78x2.13x0.92 inches)
Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Weight
:
216g
E-mail:[email protected]
2012/11/14 REV:19
Tel:886-6-2923150
Page 4 of 5
NC
Triple
-Vout3
-Vout
-Vout
-Vout2
Common
5
NC
Common
+Vout2
+Vout2
6
+Vout
+Vout
-Vout1
-Vout1
+Vout1
+Vout1
NC
NC: No Connection
10.0 [0.39]
Case Size
7
6
5
4
3
AC(L) – AC Line
7
Physical Characteristics
4x
AC(N) – AC Neutral
2
4
86.0 [3.39]
96.0 [3.78]
Dual
(D512)
1
3
POWER"GOOD"INDICATOR
76.0 [2.99]
Dual
(D12,D15)
Single
►All
dimensions in mm (inches)
►Tolerance: X.X±0.5
(X.XX±0.02)
X.XX±0.25 ( X.XXX±0.01)
►Pin
pitch tolerance: ±0.25 (0.01)
AKF-15 SERIES
AC/DC POWER MODULE 15W, Single, Dual & Triple Output
DIN-Rail Mounting Kit
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
2012/11/14 REV:19
Page 5 of 5
Similar pages