DFEC60 SERIES CHASSIS-MOUNT DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 60 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • SCREW TERMINALS FOR INPUT AND OUTPUT CONNECTIONS • RELIABLE SNAP-ON FOR DIN RAIL TS-35/7.5 OR TS-35/15 • CASE PROTECTION MEET IP20(IEC60529) • INTERNAL OUTPUT DC-OK INDICATOR • MEET EN55022 CLASS B • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1 • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • COMMUNICATION SYSTEM • INDUSTRY CONTROL SYSTEM • FACTORY AUTOMATIC EQUIPMENT • SEMICONDUCTOR EQUIPMENT SCP FUSE INCLUDED OVP INRUSH LIMIT TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ Model Number DFEC60-24S3P3 DFEC60-24S05 DFEC60-24S12 DFEC60-24S15 DFEC60-24S24 DFEC60-48S3P3 DFEC60-48S05 DFEC60-48S12 DFEC60-48S15 DFEC60-48S24 REVERSE POLARITY PROTECTION otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency VDC 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 12 15 24 3.3 5 12 15 24 A 14 12 5 4 2.5 14 12 5 4 2.5 mA 104 134 59 74 76 102 94 37 42 45 % 87 88 88 88 87 87 88 88 88 87 Maximum Capacitor Load (1) µF 36000 20400 3550 2300 885 36000 20400 3550 2300 885 PART NUMBER STRUCTURE DFEC60 Series Name 1 48 Input Voltage (VDC) 24: 18~36 48: 36~75 S 05 Output Quantity Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 24: 24 S: Single - N Remote Control Option : Positive logic N: Negative logic www.PDUKE.com 2014/4/30 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Input fuse (slow blow) In-rush current Input reflected ripple current Start up voltage Input surge voltage Nominal input and Constant resistive load 100ms, max. Remote ON/OFF Referred to –Vin pin OUTPUT SPECIFICATIONS Parameter 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of Ctrl pin Remote off input current Conditions Voltage accuracy Low Line to High Line at Full Load No Load to Full Load Voltage adjustability Single output Ripple and noise Measured by 20MHz bandwidth Output indicator Over load protection Short circuit protection Unit 36 75 VDC 3.3Vout Others 24Vout Others 3.3Vout, 5Vout 12Vout, 15Vout 24Vout 3.3Vout 5Vout 12Vout 15Vout 24Vout Conditions Isolation resistance Isolation capacitance Switching frequency Safety meets 500VDC A mAp-p 15 32 100 20 ms 50 100 Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC -0.5 1.0 4 Typ. -1.5 -1.0 -0.5 -2.5 -1.5 -10 -10 Input to Output Input (Output) to Chassis www.PDUKE.com VDC mA mA Max. Unit +1.5 +1.0 +0.5 +2.5 +1.5 +20 +10 % 75 100 130 % % % mVp-p +0.02 ℃ %/ µs 3.7 5.6 13.8 16.8 30.0 5.4 7.0 17.5 VDC 20.5 33.0 Green LED 150 % Continuous, automatics recovery Min. Typ. 1600 1600 1 270 MIL-HDBK-217F, Full load VDC VDC 250 % of Iout rated; Hiccup mode 1 minute A 17.5 34.5 -0.02 Isolation voltage 2 Single 25% load step change Zener diode clamp GENERAL SPECIFICATIONS Parameter Chassis material Weight MTBF Max. 24 48 8 4 15 15 Min. 3.3Vout Others Line regulation Load regulation Temperature coefficient Transient response recovery time Over voltage protection Typ. 18 36 Nominal input and Full load Shutdown voltage Start up time Min. Max. Unit VDC 300 GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 Aluminum 182g (6.40oz) 5.296 x 105 hrs 4000 330 2014/4/30 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Min. Without derating With derating Storage temperature range Thermal shock Vibration Relative humidity EMC SPECIFICATIONS Parameter EMI ESD Radiated immunity Fast transient Surge Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Typ. -40 +55 -40 Max. Unit ℃ ℃ +55 +85 +105 MIL-STD-810F MIL-STD-810F 5% to 95% RH Level Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Air ± 8kV and Contact ± 6kV 10V/m ± 2kV ± 1kV 10Vr.m.s Note: 1. Test by minimum input and constant resistive load. CHARACTERISTIC CURVE DFEC60-48S05 Derating Curve DFEC60-48S05 Efficiency vs. Input Voltage DFEC60-48S05 Efficiency vs. Output Load MECHANICAL DRAWING PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 4 +Vin 5 NC 6 -Vout 7 +Vout 8 NC * NC No Connection * Screw terminals – wire range from 14 to 18 AWG : 1. All dimensions in Inch (mm) 2. Tolerance : X.XX±0.02 (X.X±0.5) 4. Tolerance : X.XXX±0.01 (X.XX±0.25) 3. Terminal screw locked torque : MAX 2.5kgf cm (0.25N m) - 3 www.PDUKE.com - 2014/4/30