Miniature Aluminum Electrolytic Capacitors NRSJ Series ULTRA LOW IMPEDANCE AT HIGH FREQUENCY, RADIAL LEADS FEATURES • VERY LOW IMPEDANCE • LONG LIFE AT 105°C (2000 hrs.) includes all homogeneous materials • HIGH STABILITY AT LOW TEMPERATURE RoHS Compliant *See Part Number System for Details CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current After 2 Minutes at 20°C 6.3 ~ 50Vdc 100 ~ 2,700µF -25° ~ +105°C ±20% (M) 0.01CV or 3µA whichever is greater W.V. (Vdc) S.V. (Vdc) C < 1,500µF C = 2,200µF ~ 2,700µF 6.3 8 0.22 0.24 10 13 0.19 0.21 16 20 0.16 0.18 25 32 0.14 0.16 35 44 0.12 - 50 63 0.10 - Low Temperature Stability Impedance Ratio @ 120Hz Z-25°C/Z+20°C 3 3 3 3 3 3 Load Life Test at Rated W.V. 105°C 2,000 Hrs. Capacitance Change Tan δ Leakage Current Max. Tan δ at 120Hz/20°C MAXIMUM RIPPLE CURRENT (mA AT 100KHz/105°C) MAXIMUM IMPEDANCE (Ω AT 100KHz/20°C) Working Voltage (Vdc) 16 25 35 0.030 0.032 0.030 0.025 Cap (µF) 100 121 150 180 6.3 - 10 - 220 - - 270 - - - - - 330 - - 0.030 0.032 0.025 - 390 - - 0.018 0.027 0.020 0.020 0.022 - 270 - - - - - 0.023 330 - - 1140 1080 140 - - 390 - - 1820 1390 1920 1720 1830 - 470 - 1140 0.018 - 560 1140 - - 680 - 0.018 - - 1000 0.013 - - - 1500 1140 1540 1870 1540 2000 1870 2000 2550 0.013 - - - - 2200 - - - - - 2700 680 - 0.032 0.025 0.016 0.025 0.018 0.016 0.018 0.013 2700 - 0.016 0.030 2200 220 - 560 1500 10 - 0.018 0.027 0.020 0.020 0.022 0.016 0.030 0.030 0.025 0.016 0.025 0.018 0.016 0.018 0.013 0.013 6.3 - - - Working Voltage (Vdc) 16 25 35 1110 1080 1110 1440 Cap (µF) 100 121 150 180 50 0.046 0.049 0.036 0.039 0.023 0.026 0.025 0.029 0.021 0.032 0.025 0.016 0.025 0.018 0.016 0.018 0.013 470 1000 Within ±25% of initial measured value Less than 200% of specified value Less than specified value 1140 1540 1870 1540 2000 1870 2000 2550 2550 - - 1140 1540 1870 1540 2000 1870 2000 2550 1820 1390 1920 1720 1830 2180 50 920 890 1230 1180 1680 1720 1610 1630 1980 1800 - 2180 - 2060 - - - 2060 - - 2550 - - - 2550 - - - - - - - - - PRECAUTIONS ® NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 109 Miniature Aluminum Electrolytic Capacitors NRSJ Series STANDARD PRODUCT AND CASE SIZE TABLE DΦ x L (mm) Cap (µF) 100 121 150 180 Code 101 121 151 181 220 22 270 271 330 331 390 291 470 471 560 561 680 681 1000 102 1500 152 2200 222 2700 272 Working Voltage (Vdc) 16 25 35 50 8x11.5 8x11.5 8x11.5 10x12.5 10x12.5 8x11.5 8x20 8x11.5 10x12.5 10x16 8x20 10x16 10x20 8x11.5 8x20 8x11.5 10x12.5 10x12.5 10x20 10x16 8x20 10x16 8x11.5 8x20 8x11.5 10x12.5 10x12.5 10x20 10x16 8x11.5 10x20 8x11.5 8x20 8x20 10x12.5 10x12.5 10x16 10x16 10x20 8x11.5 8x20 8x20 10x12.5 10x12.5 10x16 10x20 10x16 10x20 8x20 8x20 10x12.5 10x16 10x20 10x16 10x20 8x20 10x16 10x20 10x20 10x20 6.3 - 10 - DIAMETER AND LEADSPACE (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim. α 8 0.6 3.5 0.5 Polarity Marking 10 0.6 5.0 0.5 Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. β = L < 16mm = 1.5mm, L > 20mm = 2.0mm 15mm Min. 4mm Min. Dφ ± α PART NUMBER SYSTEM NRSJ 102 M 25V 10x20 TB F RoHS Compliant Tape and Box* Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code Series *see tape specification for details ® 110 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com