Vishay MAL212386229 Aluminum capacitors solid axial Datasheet

123 SAL-A
Vishay BCcomponents
Aluminum Capacitors
Solid Axial
FEATURES
• Polarized aluminum electrolytic capacitors, solid
electrolyte MnO2
• Axial leads, aluminum case, ceramic seal, blue
insulation sleeve
Fig.1 Component outline
Pb-free
Available
RoHS*
COMPLIANT
• SAL-A: standard version
• SAL-AG: epoxy filled shock-proof version up to 10 000 g
123
SAL-A
radial
higher
CV/volume
128
SAL-RPM
• Charge and discharge
0 Ω resistance allowed
Tolerance on CR
Rated voltage range, UR
application
with
• AC voltage up to 0.8 x UR allowed
• Advanced technology to achieve high reliability and high
stability
QUICK REFERENCE DATA
Rated capacitance range
(E6 series), CR
proof,
• Reverse DC voltage up to 0.3 x UR allowed
175 TMP
Maximum case size
(Ø D x L in mm)
• Extended high temperature range up to 200 °C
• Excellent low temperature impedance and ESR behaviour
175 °C
solid SMD
DESCRIPTION
• Extremely long useful life: 20 000 hours at 125 °C
VALUE
6.7 x 15.3 to 12.9 x 32.0
1.0 µF to 1500 µF
± 20 %; ± 10 % on request
6.3 V to 40 V
APPLICATIONS
• EDP, telecommunication, industrial high temperature,
automotive, military and space
• Smoothing, filtering, buffering, timing
• For power supplies, DC/DC converters
MARKING
Category temperature range
- 55 °C to + 125 °C
The capacitors are marked (where possible) with the
following information:
Usable temperature range
- 80 °C to + 200 °C
• Rated capacitance (in µF)
Endurance test at 155 °C
and 125 °C
5000 hours and 8000 hours
• Tolerance code on rated capacitance, code letter in
accordance with IEC 60062 (M = ± 20 %, K = ± 10 %)
Useful life at 125 °C
20 000 hours
• Rated voltage
temperature
Useful life at 40 °C, IR applied
450 000 hours
• Date code in accordance with IEC 60062
(in
V)
at
corresponding
maximum
• Name of manufacturer
Shelf life at 0 V, 125 °C
Based on sectional specification
500 hours
IEC 60384-4/EN130300
• Code for factory of origin
• Band to indicate the negative terminal
• ‘+’ sign to identify the positive terminal
Climatic category IEC 60068
55/125/56
• Series number
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 28355
Revision: 23-Jun-08
For technical questions, contact: [email protected]
www.vishay.com
251
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
SELECTION CHART FOR CR, UR AND RELEVANT MAXIMUM CASE SIZES (Ø D x L in mm)
CR
(µF)
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
6.3
10
6.3
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
10
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
-
UR (V) at Tamb = 85 °C
16
25
UC (V) at Tamb = 125 °C
16
25
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
10.3 x 32.0
12.9 x 32.0
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
12.9 x 32.0
-
35
40
25
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
-
25
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
10.3 x 32.0
12.9 x 32.0
-
DIMENSIONS in millimeters AND AVAILABLE FORMS
ØD
Ød
Lmax.
F
BA: taped in box (ammopack)
BR: taped on reel
73
Fig.2 Forms: BA and BR
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
CASE
MAXIMUM SIZE
Ø D x L (1)
6.7 x 15.3
7.6 x 20.4
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
CODE
1
2A
4
5
6
Fmax.
Ød
MASS (2)
(g)
20.0
22.5
25.0
35.0
35.0
0.6
0.6
0.6
0.8
0.8
≈ 1.05
≈ 1.55
≈ 2.6
≈ 4.2
≈7
PACKAGING QUANTITIES
FORM
BA
FORM
BR
100
100
100
100
100
800
800
500
500
400
Note
For epoxy-filled versions add 1 mm to stated Lmax.
Add 10 % for SAL-AG epoxy-filled versions.
Detailed tape dimensions see section ‘PACKAGING’.
www.vishay.com
252
For technical questions, contact: [email protected]
Document Number: 28355
Revision: 23-Jun-08
123 SAL-A
Aluminum Capacitors
Solid Axial
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Vishay BCcomponents
Electrolytic capacitors 123 series
DESCRIPTION
CR
rated capacitance at 100 Hz
IR
max. RMS ripple current, no necessary DC voltage
applied
IL5
max. leakage current after 5 minutes at UR
tan δ
max. dissipation factor at 100 Hz
ESR
max./typ. equivalent series resistance at 100 Hz
Z
max. impedance at 100 kHz
10 µF/16 V; ± 20 %
Maximum case size: Ø 6.7 x 15.3 mm; Form BR
for lead (Pb)-free:
Ordering code: MAL2 123 25109 E3
Former 12NC: 2281 123 25109
for non lead (Pb)-free:
Ordering code: MAL2 123 25109
Former 12NC: 2222 123 25109
Note
Unless otherwise specified, all electrical values in Table 2 apply at
Tamb = 20 to 25 °C, P = 86 to 106 kPa, RH = 45 to 75 %.
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION for 123 series
ORDERING CODE
MAL2123.....E3 Lead (Pb)-free
MAL2123 ..... Non lead (Pb)-free
UC
(V)
IR
IR
IR
MAX.
IL5
CR
UR
tan δ
CASE SIZE 100 Hz 10 kHz 100 kHz
100 Hz
5 min
Ø D x L 125 °C 85 °C
100 Hz
40 °C
(V)
(µF)
(µA)
(mm)
(mA)
(mA)
(mA)
6.3 6.3
10
10
16
16
25
25
47
68
150
330
680
1000
1500
33
47
68
100
150
220
330
470
680
1000
10
15
22
33
47
68
100
150
220
330
470
680
10
15
22
33
47
68
100
150
220
330
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
Document Number: 28355
Revision: 23-Jun-08
58
83
160
330
680
940
1220
63
83
110
160
240
350
490
570
760
1000
31
47
63
89
120
180
260
310
420
510
680
850
43
60
88
130
160
230
250
350
460
600
440
520
870
1470
2340
3180
4140
360
440
590
710
990
1180
1650
1940
2580
3380
230
280
340
470
560
670
920
1060
1420
1740
2280
2870
230
280
370
470
560
760
860
1200
1560
2030
640
760
1270
2140
3410
4640
6020
530
640
850
1040
1450
1720
2410
2830
3750
4920
330
400
490
680
810
970
1340
1550
2060
2530
3330
4170
330
400
550
680
810
1110
1250
1740
2270
2950
15
21
47
104
214
315
473
17
24
34
50
75
110
165
235
340
500
16
24
35
55
75
110
160
240
350
500
750
870
25
35
55
85
100
170
250
400
550
800
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.16
0.16
0.16
0.16
0.16
0.14
0.14
0.14
0.14
0.14
0.14
0.16
0.16
0.16
0.16
MAX.
ESR
100 Hz
(Ω)
TYP.
ESR
100 Hz
(Ω)
Z
100 kHz
(Ω)
7.6
5.3
2.4
1.1
0.55
0.36
0.24
11
7.6
5.3
3.6
2.4
1.7
1.1
0.8
0.55
0.36
28
19
13
8.4
5.9
4.1
2.8
2.1
1.5
1.0
0.7
0.5
28
19
13
8.4
5.9
4.1
3.2
2.1
1.5
1.0
3.0
2.6
1.5
0.55
0.28
0.19
0.13
3.8
4.0
2.5
1.8
0.9
0.6
0.45
0.35
0.25
0.18
8.0
5.5
5.5
3.0
2.6
2.5
1.5
0.7
0.55
0.35
0.25
0.18
13.0
10.0
7
5
3.5
1.8
1.0
1.2
0.85
0.60
1.2
1.2
1.0
0.4
0.3
0.2
0.2
1.2
1.2
1.0
1.0
0.4
0.4
0.3
0.3
0.2
0.2
2.5
2.5
2.5
2.0
2.0
2.0
0.8
0.8
0.6
0.6
0.4
0.4
5
5.0
2.5
2.5
2.5
1.0
1.0
0.8
0.6
0.6
SAL-A
FORM
BA
tol.
± 20 %
SAL-A
FORM
BR
tol.
± 20 %
13479
13689
13151
13331
13681
13102
13152
14339
14479
14689
14101
14151
14221
14331
14471
14681
14102
15109
15159
15229
15339
15479
15689
15101
15151
15221
15331
15471
15681
16109
16159
16229
16339
16479
16689
16101
16151
16221
16331
23479
23689
23151
23331
23681
23102
23152
24339
24479
24689
24101
24151
24221
24331
24471
24681
24102
25109
25159
25229
25339
25479
25689
25101
25151
25221
25331
25471
25681
26109
26159
26229
26339
26479
26689
26101
26151
26221
26331
For technical questions, contact: [email protected]
SALAG (1)
FORM
BA
tol.
± 10 %
level S
83479
83689
83151
83331
83681
83102
83152
84339
84479
84689
84101
84151
84221
84331
84471
84681
84102
85109
85159
85229
85339
85479
85689
85101
85151
85221
85331
85471
85681
86109
86159
86229
86339
86479
86689
86101
86151
86221
86331
SALAG (1)
FORM
BA
tol.
± 20 %
63479
63689
63151
63331
63681
63102
63152
64339
64479
64689
64101
64151
64221
64331
64471
64681
64102
65109
65159
65229
65339
65479
65689
65101
65151
65221
65331
65471
65681
66109
66159
66229
66339
66479
66689
66101
66151
66221
66331
www.vishay.com
253
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION for 123 series
ORDERING CODE
MAL2123.....E3 Lead (Pb)-free
MAL2123 ..... Non lead (Pb)-free
UC
(V)
IR
IR
IR
MAX.
IL5
CR
UR
CASE SIZE 100 Hz 10 kHz 100 kHz
tan δ
100 Hz
5 min
Ø D x L 125 °C 85 °C
100 Hz
40 °C
(V)
(µF)
(µA)
(mm)
(mA)
(mA)
(mA)
25
35
25
40
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
12.9 x 32.0
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
6.7 x 15.3
7.6 x 20.4
7.6 x 20.4
9.4 x 23.3
9.4 x 23.3
10.3 x 32.0
10.3 x 32.0
12.9 x 32.0
4
7
10
14
20
27
37
53
78
120
140
170
220
290
11
16
22
28
41
61
89
120
160
170
220
55
68
82
100
120
140
200
240
290
410
480
570
760
990
82
100
120
140
200
240
330
410
540
570
760
80
98
120
150
170
210
280
350
420
590
700
820
1100
1440
120
150
170
210
280
350
480
590
790
820
1100
5
5
5
7
10
15
20
30
45
65
95
135
200
300
9
13
19
27
40
60
90
130
190
270
400
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.16
0.16
0.16
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.16
0.16
MAX.
ESR
100 Hz
(Ω)
TYP.
ESR
100 Hz
(Ω)
Z
100 kHz
(Ω)
240
160
109
73
51
35
24
16
11
7.2
5.1
4.7
3.2
2.1
109
73
51
35
24
16
11
7.2
5.1
4.7
3.2
105
40.60
30
28
20
16
10
8
7
3
2.9
2.1
1.7
1.0
38
25
20
15
11
7
4
2.9
2.7
2.3
1.6
16.5
11.0
7.5
7.5
7.5
7.5
2.5
2.5
2.5
1.0
1.0
0.8
0.6
0.6
7.5
7.5
7.5
7.5
2.5
2.5
1.5
1.0
1.0
0.8
0.6
SAL-A
FORM
BA
tol.
± 20 %
SAL-A
FORM
BR
tol.
± 20 %
10108
10158
10228
10338
10478
10688
10109
10159
10229
10339
10479
10689
10101
10151
17228
17338
17478
17688
17109
17159
17229
17339
17479
17689
17101
20108
20158
20228
20338
20478
20688
20109
20159
20229
20339
20479
20689
20101
20151
27228
27338
27478
27688
27109
27159
27229
27339
27479
27689
27101
SALAG (1)
FORM
BA
tol.
± 10 %
level S
80108
80158
80228
80338
80478
80688
80109
80159
80229
80339
80479
80689
80101
80151
87228
87338
87478
87688
87109
87159
87229
87339
87479
87689
87101
SALAG (1)
FORM
BA
tol.
± 20 %
60108
60158
60228
60338
60478
60688
60109
60159
60229
60339
60479
60689
60101
60151
67228
67338
67478
67688
67109
67159
67229
67339
67479
67689
67101
Note
SAL-AG types are epoxy-filled.
ADDITIONAL ELECTRICAL DATA
PARAMETER
Voltage
Surge voltage
Reverse voltage
Maximum peak AC voltage, reverse
voltage applied
Maximum peak AC voltage, without
reverse voltage applied
CONDITIONS
VALUE
Us ≤ 1.15 x UR
Urev < 0.3 x UR
≤2V
Tamb ≤ 85 °C:
at f ≤ 0.1 Hz
at 0.1 Hz < f ≤ 1 Hz
at 1 Hz < f ≤ 10 Hz
at 10 Hz < f ≤ 50 Hz
at f > 50 Hz
85 °C < Tamb ≤ 125 °C:
at f ≤ 0.1 Hz
at 0.1 Hz < f ≤ 1 Hz
at 1 Hz < f ≤ 10 Hz
at 10 Hz < f ≤ 50 Hz
at f > 50 Hz
0.30 x UR
0.45 x UR
0.60 x UR
0.65 x UR
0.80 x UR
0.15 x UR
0.22 x UR
0.30 x UR
0.32 x UR
0.40 x UR
Current
Maximum leakage current
After 5 minutes at UR and Tamb = 25 °C
IL5 ≤ 0.05 CR x UR or 2 µA, whichever is greater;
see Table 2
Typical leakage current
After 15 s at UR and Tamb = 25 °C:
UR = 6.3 to 16 V
UR = 25 to 40 V
≈ 0.2 x value stated in Table 2
≈ 0.1 x value stated in Table 2
www.vishay.com
254
For technical questions, contact: [email protected]
Document Number: 28355
Revision: 23-Jun-08
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
VOLTAGE
40
(1)
(1)
UC = 125 °C
(2)
UC = 175 °C
35
(2)
RIPPLE CURRENT (IR)
PARAMETER
UR
(V)
IR multiplier
25
Tamb
25 °C
40 °C
1.1
1.0
65 °C 85 °C 105 °C 125 °C
0.88
0.75
0.59
0.37
Notes
(1)
16
Applying the maximum RMS ripple current given in Table 2
will cause a device temperature of 138 °C.
(2)
10
The 100 kHz values in Table 2 for other temperatures are to
be calculated with the above IR multipliers.
6.3
4
0
- 50
0
50
85
100
125
150 175
Tamb (°C)
Fig.3 Maximum permissible voltage up to 175 °C
LEAKAGE CURRENT
10 2
10
reverse voltage
I
I01
I
I 02
10
1
1
10
-1
I01 = leakage current during continuous operation
at UR and Tamb = 25 °C
- 50
0
50
100
150
10-1
Tamb (°C)
I02 = leakage current at UR at a
discrete constant temperature
- 0.4
0
0.4
U
0.8
UR
Fig.4 Typical multiplier of leakage current as a function of
ambient temperature
Fig.5 Typical multiplier of leakage current as a function of U/UR
DISSIPATION FACTOR (tan δ)
tan δ
tan δ0
1.1
standard deviation σ
C
C0
1.0
0.9
0.05
σ
0.8
2.4
Typical tan δ at 100 Hz and Tamb = 25 °C:
0.6 x value stated in Table 2
2.0
standard deviation σ
CAPACITANCE (C)
1.6
1.2
0.8
0.4
0.25
0
σ
0
0
C0 = capacitance at 25 °C and 100 Hz
- 80
- 40
0
40
80
120
Fig.6 Typical multiplier of capacitance as a function
of ambient temperature
Document Number: 28355
Revision: 23-Jun-08
- 80
- 40
0
160
200
Tamb (°C)
40
80
120
160
200
Tamb (°C)
Fig.7 Typical multiplier of dissipation factor as a function of
ambient temperature
For technical questions, contact: [email protected]
www.vishay.com
255
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
MAXIMUM POWER DISSIPATION
MAXIMUM CASE SIZE
ØDxL
(mm)
6.7 x 15.3
7.6 x 20.4
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
Pmax. = P125
(W)
0.13
0.16
0.21
0.26
0.32
EQUIVALENT SERIES INDUCTANCE (ESL), f = 10 MHz
MAXIMUM CASE SIZE
ØDxL
(mm)
6.7 x 15.3
7.6 x 20.4
9.4 x 23.3
10.3 x 32.0
12.9 x 32.0
PITCH
(mm)
MAX. ESL
(nH)
TYP. ESL
(nH)
20.3
25.4
27.9
35.6
35.6
30
30
35
40
55
15 to 23
16 to 24
20 to 27
26 to 33
32 to 49
IMPEDANCE (Z)
Typical impedance at 100 kHz and Tamb = 25 °C: 0.5 x value stated in Table 2.
3.5
Z
Z0
1
3.0
2
3
2.5
1
2.0
2
3
- 55 °C
1.5
- 25 °C
+ 25 °C
1.0
3
+ 85 °C
0.5
2
1
3
+ 175 °C
2
1
0
10
10 2
10 3
10 4
10 5
1
1
4
7
10
10 6
f (Hz)
10 7
10
3
standard deviation σ (%)
Curve 1: case Ø D x L = 6.7 x 15.3 and 7.6 x 20.4 mm; 16 to 40 V
Curve 2: case Ø D x L = 6.7 x 15.3 and 7.6 x 20.4 mm; 6.3 to 10 V
Curve 3: case Ø D x L = 9.4 x 32.0, 10.3 x 32.0 and 12.9 x 32.0 mm
Z0 = initial impedance value at any frequency and Tamb = 25 °C
Fig.9 Typical multiplier of impedance as a function of frequency at different ambient temperatures
www.vishay.com
256
For technical questions, contact: [email protected]
Document Number: 28355
Revision: 23-Jun-08
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
IMPEDANCE (Z)
104
103
Z
(Ω)
Curve 1: 10 µF, 16 V
Curve 2: 15 µF, 16 V
Curve 3: 22 µF, 16 V
Curve 4: 33 µF, 10 V
Curve 5: 47 µF, 6.3 and 10 V
Curve 6: 68 µF, 6.3 V
1
2
3
4
5
6
102
Z
(Ω)
102
1
10
Case Ø D x L = 6.7 x 15.3 mm;
UR = 25 to 40 V
Case Ø D x L = 6.7 x 15.3 mm; UR = 6.3 to 16 V
10-1
1
2
3
4
5
6
103
10
Curve 1: 2.2 µF, 35 and 40 V
Curve 2: 3.3 µF, 40V
Curve 3: 4.7 µF, 35 and 40 V
Curve 4: 6.8 µF, 35 and 40 V
Curve 5: 10 µF, 25 V
Curve 6: 15 µF, 25 V
1
10
102
103
104
105
106 f (Hz) 107
10
102
103
104
105
Tamb = 25 °C
Tamb = 25 °C
Fig.11 Typical impedance as a function of frequency
Fig.10 Typical impedance as a function of frequency
103
103
Curve 1: 33 µF, 16 V
Curve 2: 47 µF, 16 V
Curve 3: 68 µF, 10 V
Curve 4: 100 µF, 6.3 and 10 V
Curve 5: 150 µF, 6.3 V
Z
(Ω)
102
1
2
3
4
5
10
Z
(Ω)
Curve 1: 10 µF, 35 and 40 V
Curve 2: 15 µF, 35 and 40 V
Curve 3: 22 µF, 25 and 40 V
Curve 4: 33 µF, 25 V
Curve 5: 47 µF, 25 V
Curve 6: 68 µF, 16 V
1
2
3
4
5
6
102
10
1
10-1
1
Case Ø D x L = 6.7 x 20.4 mm
UR = 6.3 to 16 V
10
102
103
10-1
104
105
106 f (Hz) 107
Case Ø D x L = 6.7 x 20.4 mm; UR = 16 to 40 V
10
102
103
104
105
Tamb = 25 °C
102
106 f (Hz) 107
Tamb = 25 °C
Fig.13 Typical impedance as a function of frequency
Fig.12 Typical impedance as a function of frequency
103
Curve 1: 150V, 10 V
Curve 2: 220 V, 10V
Curve 3: 330 V, 6.3 V
Z
(Ω)
10
1
1
2
3
4
5
6
10
-1
Curve 1: 22 µF, 40 V
Curve 2: 33 µF, 35 and 40 V
Curve 3: 47 µF, 35 V
Curve 4: 68 µF, 25 V
Curve 5: 100 µF, 16 and 25 V
Curve 6: 150 µF, 16 V
Z
(Ω)
102
1
2
3
1
10
10-2
106 f (Hz) 107
Case Ø D x L = 9.4 x 23.3 mm; UR = 6.3 to 10 V
10
102
103
104
105
10-1
106 f (Hz) 107
Case Ø D x L = 9.4 x 23.3 mm;
UR = 16 to 40 V
10
102
103
Tamb = 25 °C
Fig.14 Typical impedance as a function of frequency
Document Number: 28355
Revision: 23-Jun-08
104
105
106 f (Hz) 107
Tamb = 25 °C
Fig.15 Typical impedance as a function of frequency
For technical questions, contact: [email protected]
www.vishay.com
257
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
IMPEDANCE (Z)
103
102
Curve 1: 220 µF, 16 V
Curve 2: 330 µF, 16 V
Curve 3: 330 µF, 10 V
Curve 4: 470 µF, 10 V
Curve 5: 680 µF, 6.3 V
Z
(Ω)
1
2
3
4
5
10
Curve 1: 47 V, 40 V
Curve 2: 68 V, 35 and 40 V
Curve 3: 150 V, 25 V
Z
(Ω)
102
1
2
3
10
1
-1
1
10
10-2
Case Ø D x L = 10.3 x 32.0 mm; UR = 6.3 to 16 V
102
10
103
104
105
10-1
106 f (Hz) 107
Case Ø D x L = 10.3 x 32.0 mm;
UR = 25 to 40 V
102
10
103
104
105
106 f (Hz) 107
Tamb = 25 °C
Tamb = 25 °C
Fig.16 Typical impedance as a function of frequency
Fig.17 Typical impedance as a function of frequency
102
102
Curve 1: 680 µF, 10 V
Curve 2: 1000 µF, 6.3 V
Curve 3: 1500 µF, 6.3 V
Z
(Ω)
10
Z
(Ω)
10
1
2
3
1
1
10-1
10-1
10-2
Case Ø D x L = 12.9 x 32.0 mm; UR = 6.3 to 10 V
10 2
10 4
103
10-2
Case Ø D x L = 12.9 x 32.0 mm; UR = 10 to 40V
10 2
10 6 f (Hz) 10 7
Tamb = 25 °C
10 5
Curve 1: 100 µF, 35 and 40 V
Curve 2: 150 µF, 35 V
Curve 3: 220 µF, 25 V
Curve 4: 470 µF, 16 V
Curve 5: 680 µF, 16 V
Curve 6: 1000 µF, 10 V
1
2
3
4
5
6
10 4
103
10 6 f (Hz) 10 7
10 5
Tamb = 25 °C
Fig.19 Typical impedance as a function of frequency
Fig.18 Typical impedance as a function of frequency
EQUIVALENT SERIES RESISTANCE (ESR)
Typical ESR: see Figs to 24; the standard deviation is 20 % of each value.
102
102
Case Ø D x L = 6.7 x 15.3 mm
ESR at 100 Hz
ESR
(Ω)
10
1
ESR at 100 Hz
Case Ø D x L = 7.6 x 20.4 mm
ESR
(Ω)
10
1
3
2
1
10-1
4
5
Curve 1: 10 mF, 25 V; 6.8 mF, 35 and 40 V
Curve 2: 10 mF, 16 V
Curve 3: 22 mF, 16 V
Curve 4: 33 mF, 10 V
Curve 5: 47 mF, 6.3 and 10 V; 68 mF, 6.3 V
- 80
- 40
0
40
80
1
10-1
120
160
200
Tamb (°C)
Fig.20 Typical ESR as a function of ambient temperature
www.vishay.com
258
2
3
4
5
Curve 1: 10 µF, 35 and 40 V
Curve 2: 33 µF, 25 V
Curve 3: 47 µF, 25 V
Curve 4: 68 µF, 10 V; 150 µF, 6.3 V
- 80
- 40
0
40
80
120
160
200
Tamb (°C)
Fig.21 Typical ESR as a function of ambient temperature
For technical questions, contact: [email protected]
Document Number: 28355
Revision: 23-Jun-08
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
EQUIVALENT SERIES RESISTANCE (ESR)
102
102
Curve 1: 33 µF, 35 and 40 V
Curve 2: 220 µF, 10 V; 330 µF, 6.3 V
ESR
(Ω)
Case Ø D x L = 10.3 x 32.0 mm
ESR at 100 Hz
ESR
(Ω)
Curve 1: 68 µF, 35 and 40 V
Curve 2: 150 µF, 25 V
Curve 3: 330 µF, 10 V
Curve 4: 470 µF, 10 V
10
10
1
1
1
1
2
2
Case Ø D x L = 9.4 x 23.3 mm
10-1
- 80
- 40
0
40
ESR at 100 Hz
80
120
160
- 80
200
Tamb (°C)
102
ESR
(Ω)
10
- 40
0
40
80
120
160
200
Tamb (°C)
Fig.23 Typical ESR as a function of ambient temperature
Fig.22 Typical ESR as a function of ambient temperature
Case Ø D x L = 12.9 x 32.0 mm
ESR at 100 Hz
3
4
10-1
103
ESR
(Ω)
Curve 1: 100 µF, 35 and 40 V
Curve 2: 150 µF, 35 V
Curve 3: 220 µF, 25 V
Curve 4: 470 µF, 16 V
Curve 5: 680 µF, 10 V;
1000 µF, 6.3 V
Curve 1: 10 µF, 25 V; 6.8 µF, 35 and 40 V
Curve 2: 10 µF, 16 V
Curve 3: 22 µF, 16 V
Curve 4: 33 µF, 10 V
Curve 5: 47 µF, 6.3 and 10 V; 68 µF, 6.3 V
1
2
3
102
4
5
10
1
10-1
- 80
- 40
0
40
80
120
160
1
2
3
4
1
5
10-1
Case Ø D x L = 6.7 x 15.3 mm
1
200
Tamb (°C)
10
10 2
10 3
10 4
10 5
f (Hz)
10 6
Tamb = 25 °C
Fig.25 Typical ESR as a function of frequency
Fig.24 Typical ESR as a function of ambient temperature
102
103
ESR
(Ω)
Curve 1: 10 µF, 35 and 40 V
Curve 2: 33 µF, 25 V
Curve 3: 47 µF, 25 V
Curve 4: 68 µF, 10 V; 150 µF, 6.3 V
Curve 5: 100 µF, 10 V
1
102
2
3
4
5
10
Curve 1: 33 µF, 35 and 40 V
Curve 2: 220 µF, 10 V; 330 µF, 6.3 V
ESR
(Ω)
10
1
1
1
2
10-1
Case Ø D x L = 6.7 x 20.4 mm
10-1
1
10
10 2
10 3
Case Ø D x L = 9.4 x 23.3 mm
10-2
10 4
10 5
f (Hz)
10 6
1
10
10 2
10 3
10 4
10 5
10 6
f (Hz)
Tamb = 25 °C
Fig.26 Typical ESR as a function of frequency
Document Number: 28355
Revision: 23-Jun-08
Tamb = 25 °C
Fig.27 Typical ESR as a function of frequency
For technical questions, contact: [email protected]
www.vishay.com
259
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
EQUIVALENT SERIES RESISTANCE (ESR)
102
102
ESR
(Ω)
Curve 1: 68 µF, 35 and 40 V
Curve 2: 150 µF, 25 V
Curve 3: 330 µF, 10 V
Curve 4: 470 µF, 10 V
1
10
2
ESR
(Ω)
10
1
2
3
4
1
5
3
4
1
10-1
Curve 1: 100 µF, 35 and 40 V
Curve 2: 150 µF, 35 V
Curve 3: 220 µF, 25 V
Curve 4: 470 µF, 16 V
Curve 5: 680 µF, 10 V; 1000 µF, 6.3 V
10-1
Case Ø D x L = 9.4 x 23.3 mm
10-2
1
10 2
10
ESR at 100 Hz
10 3
10 4
10 5
10 6
f (Hz)
Fig.28 Typical ESR as a function of ambient temperature
ESR at 100 Hz
Case Ø D x L = 9.4 x 23.3 mm
10-2
1
10
10 2
10 3
10 4
10 5
10 6
f (Hz)
Fig.29 Typical ESR as a function of ambient temperature
Table 3
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
REFERENCE
PROCEDURE
(quick refeerence)
REQUIREMENTS
Endurance
IEC 60384-4/
EN130300
subclause 4.13
Tamb = 125 °C;
UR = 6.3 to 25 V with UR applied;
UR = 35 and 40 V with UC applied;
10 000 hours
ΔC/C: ± 10 %
tan δ ≤ 1.2 x spec. limit
Z ≤ 1.2 x spec. limit
IL5 ≤ spec. limit
Useful life
CECC 30302
subclause 1.8.1
Tamb = 125 °C; IR applied and
UR = 6.3 to 25 V with UR applied;
UR = 35 and 40 V with UC applied;
20 000 hours
ΔC/C: ± 15 %
tan δ ≤ 1.5 x spec. limit
Z ≤ 1.5 x spec. limit
IL5 ≤ spec. limit
no short or open circuit,
no visible damage
total failure percentage: < 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 125 °C; no voltage applied;
500 hours
ΔC/C: ± 10 %
tan δ ≤ 1.2 x spec. limit
IL5 ≤ 1 x spec. limit
Charge and
discharge
IEC 60384-4-2
subclause 9.21
106 cycles without series resistance:
0.5 s to UR;
0.5 s to ground
ΔC/C: ± 5 %
no short or open circuit,
no visible damage
Shock
IEC 60068-2-27
test Ea
half-sine or saw tooth pulse shape; 50 g; 11 ms;
3 successive shocks in each direction of
3 mutually perpendicular axes;
no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
ΔC/C: ± 5 %
tan δ ≤ 1.2 x spec. limit
Z ≤ 1.2 x spec. limit
IL5 ≤ 1.5 x spec. limit
100 cycles of 1 hour duration, each with
30 minutes at - 40 °C and + 125 °C
ΔC/C: ± 25 %
tan δ ≤ 1.5 x spec. limit
Z ≤ 2.0 x spec. limit
IL5 ≤ 1 x spec.limit
Severe rapid change
of temperature
Solvent resistance
IEC 60068-2-45,
test XA
IEC 60653
immersion:
5 ± 0.5 minutes with or without ultrasonic
at 55 ± 5 °C
solvents: demineralized water and/or calgonite
solution (20 g/l)
visual appearance not affected
Passive flammability
IEC 60695-2-2
capacitor mounted to a vertical printed-circuit
board, one flame on capacitor body;
Tamb = 20 to 25 °C;
test duration = 20 s
after removing the test flame from the
capacitor, the capacitor must not
continue to burn for more than 15 s;
no burning particles must drop from
the sample
www.vishay.com
260
For technical questions, contact: [email protected]
Document Number: 28355
Revision: 23-Jun-08
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
ADDITIONAL TESTS AND REQUIREMENTS FOR EPOXY-FILLED VERSIONS SAL-AG
2281 123 8.... Form BA ± 10 %, level S, lead (Pb)-free
2222 123 8.... Form BA ± 10 %, level S, non lead (Pb)-free
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
REQUIREMENTS
Severe vibration tests in accordance with “IEC 60068-2-6” and “MIL STD-202”, method 204, letter E, with the following details and
additions
ΔC/C: ± 10 %
Method of mounting:
clamping both body and leads
severity 1
frequency range temperature 10 to 3000 Hz; 20 to 25 °C tan δ ≤ 1.2 x stated limit
severity 2
frequency range temperature 50 to 2000 Hz; 125 °C
severity 1 and 2
vibration amplitude: 50 g or 3.5 mm, whichever is less
Z ≤ 1.4 x stated limit
DC leakage current: ≤ stated limit
no intermittent contacts
Direction and duration of motion:
no indication of breakdown
severity 1
1 octave/minute; 3 directions (mutually perpendicular);
20 sweeps per direction (total 60 sweeps or 18 hours)
severity 2
1 octave/minute; 2 directions (longitudinal and
transversal); 3 sweeps per direction
(total 6 sweeps or 1 hour)
no open circuiting
no evidence of mechanical damage
Functioning:
severity 1
rated voltage applied
severity 2
no voltage applied
Typical capability
> 80 g at 10 to 3000 Hz (also at 125 °C)
Severe shock tests in accordance with “IEC 60068-2-27” and “MIL STD-202”, method 213, letter F, with the following details and
additions:
Method of mounting
clamping both body and leads
ΔC/C: ± 10 %
Pulse shape:
half-sine or sawtooth
tan δ ≤ 1.2 x stated limit
severity 1
1500 g; 0.5 ms (“MIL STD-202”, method 213, letter F)
Z ≤ 1.4 x stated limit
severity 2
3000 g; 0.2 ms
severity 3
10 000 g; 0.1 ms
DC leakage current: ≤ stated limit
no intermittent contacts
Direction and number of shocks:
no open circuiting
severity 1 and 2
3 successive shocks in each direction of 3 mutually
perpendicular axes (total 18 shocks)
severity 3
1 shock in any direction
Functioning
rated voltage applied
Document Number: 28355
Revision: 23-Jun-08
no indication of breakdown
no evidence of mechanical damage
For technical questions, contact: [email protected]
www.vishay.com
261
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1