F1772-2000 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) FEATURES: Dimensions in mm Product is completely lead (Pb)-free Product is RoHS compliant W L Pb-free CAPACITANCE TOLERANCE: H e3 Standard: ± 10 % RoHS DISSIPATION FACTOR TANδ: COMPLIANT < 1 % measured at 1 KHz pcm ± 0.4 pcm ± 0.4 X INSULATION RESISTANCE: FOR C ≤ 0.33 µF: 30 GΩ average value 15 GΩ minimum value Ø 0.8 TIME CONSTANT FOR C > 0.33 µF: LEAD LENGTH X (mm) 4-1 6-1 15-1 30+5 ORDERING CODE** F1772-. . .-2004 F1772-. . .-2000 F1772-. . .-2015 F1772-. . .-2030 10 000 sec. average value 5000 sec. minimum value TEST VOLTAGE: (Electrode/electrode): DC 2150 V/2 sec. REFERENCE STANDARDS: Electrode Free margin Dielectric Center margin MAXIMUM PULSE RISE TIME: (du/dt) in V/µs Polyester film 15.0 22.5 27.5 37.5 ELECTRODES: 200 150 100 100 Metal evaporated CONSTRUCTION: RATED VOLTAGE: Metallized film capacitor Internal series connection AC 275 V, 50/60 Hz PERMISSIBLE DC VOLTAGE: Between interconnected terminations and case (foil method): AC 2500 V for 2 sec. at 25 °C. CAPACITANCE RANGE: E12 series 0.01 µFX2 - 2.2 µFX2 preferred values acc. to E6 -2 10 10 -3 0.01 0.05 0.1 0.5 1.0 0.022 µF -1 0.047 µF 10 0.015 µF 0.01 µF 40/100/56 0 0.1 µF CLIMATIC TESTING CLASS ACC.TO EN 60068-1: 10 0.033 µF Plastic case, epoxy resin sealed, flame retardant UL 94V-0 1 0.068 µF COATING: 10 0.22 µF Radial tinned copper wire 0.47 µF Z [Ω] TERMINALS: 0.15 µF DC 630 V 0.33 µF AC 275 V DIELECTRIC: PITCH (mm) 2.2 µF 1.5 µF 1 µF 0.68 µF RATED VOLTAGE EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 5.0 10 f 50 100 [MHz] Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. Document Number: 26503 Revision: 11-Jun-07 To contact us: [email protected] www.vishay.com 25 F1772-2000 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE U.S.A. (for AC 250 V) UL 1283 UL 1414 0.01 - 2.2 µFX 0.01 - 1.0 µFX E 76297 E 100682 Canada (for AC 250 V) C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 0.01 - 2.2 µFX 0.01 - 0.82 µFX LR 64546 LR 64546-8 0.01 - 2.2 µFX2 DE 1-8790 0.01 - 2.2 µFX2 40005079 CB TEST-CERTIFICATE (for AC 275 V) EN 132 400; 1999-06 IEC 60384-14, 2nd edition; 1993-07, Table II + A1: 1995-06 Germany APPROVAL MARK 10 This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria Belgium Denmark Finland Sweden France Germany Ireland Italy Switzerland Netherlands Japan Singapore CAPACITANCE TOL. (%) Israel Portugal Spain Great Britain Norway China Poland Czech. Republic Rep. of Korea Hungary Iceland Slovenia PITCH (mm) BOX NO. DIMENSIONS W x H x L (mm) (+ 0.2/- 0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) QUANTITY PACKAGE LEAD LENGTH < = 6-1 mm (pcs)** 750 750 750 750 750 750 750 500 500 500 450 325 325 325 235 235 200 170 170 125 125 125 110 100 100 80 80 70 60 ORDERING CODE*** 0.01 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-310-20 . . 0.012 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-312-20 . . 0.015 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-315-20 . . 0.018 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-318-20 . . 0.022 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-322-20 . . 0.027 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-327-20 . . 0.033 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-333-20 . . 0.039 µFX2 ± 10 15.0 06 6.3 x 12.3 x 17.8 2.0 F1772-339-20 . . 0.047 µFX2 ± 10 15.0 06 6.3 x 12.3 x 17.8 2.0 F1772-347-20 . . 0.056 µFX2 ± 10 15.0 06 6.3 x 12.3 x 17.8 2.0 F1772-356-20 . . 0.068 µFX2 ± 10 15.0 07 7.3 x 13.3 x 17.8 2.4 F1772-368-20 . . 0.082 µFX2 ± 10 15.0 08 8.3 x 14.3 x 17.8 2.7 F1772-382-20 . . 0.1 µFX2 ± 10 15.0* 08 8.3 x 14.3 x 17.8 2.7 F1772-410-20 . . 0.12 µFX2 ± 10 15.0* 08 8.3 x 14.3 x 17.8 2.7 F1772-412-20 . . 0.15 µFX2 ± 10 22.5* 11 7.3 x 15.3 x 26.3 4.1 F1772-415-20 . . 0.18 µFX2 ± 10 22.5* 11 7.3 x 15.3 x 26.3 4.1 F1772-418-20 . . 0.22 µFX2 ± 10 22.5* 12 8.3 x 16.3 x 26.3 4.6 F1772-422-20 . . 0.27 µFX2 ± 10 22.5* 13 10.3 x 18.3 x 26.3 6.7 F1772-427-20 . . 0.33 µFX2 ± 10 22.5* 13 10.3 x 18.3 x 26.3 6.7 F1772-433-20 . . 0.39 µFX2 ± 10 27.5* 14 11.0 x 20.3 x 31.3 9.1 F1772-439-20 . . 0.47 µFX2 ± 10 27.5* 14 11.0 x 20.3 x 31.3 9.1 F1772-447-20 . . 0.56 µFX2 ± 10 27.5* 14 11.0 x 20.3 x 31.3 9.1 F1772-456-20 . . 0.68 µFX2 ± 10 27.5* 15 13.0 x 23.3 x 31.3 12.9 F1772-468-20 . . 0.82 µFX2 ± 10 27.5* 15 13.0 x 23.3 x 31.3 15.0 F1772-482-20 . . 1.0 µFX2 ± 10 27.5* 18 14.5 x 24.3 x 31.3 15.0 F1772-510-20 . . 1.2 µFX2 ± 10 37.5* 16 14.0 x 24.3 x 41.3 18.9 F1772-512-20 . . 1.5 µFX2 ± 10 37.5* 19 15.5 x 28.3 x 41.3 18.9 F1772-515-20 . . 1.8 µFX2 ± 10 37.5* 19 15.5 x 28.3 x 41.3 24.0 F1772-518-20 . . 2.2 µFX2 ± 10 37.5* 20 17.8 x 32.3 x 41.3 31.6 F1772-522-20 . . Preferred values in bold print. Inbuilt discharging resistor on request (with larger case dimensions). * Different pitch on request. ** Further information about packaging quantities with different lead length and/or taped versions see Document No 27608 (Packing Quantities) Use Box No as reference *** These capacitors can be delivered on continuous tape and reel - see page 12/13 (Document Number 27622). The ordering code is F1772-. . .-2900 at H = 16.5 mm, F1772-. . .-2901 at H = 18.5 mm. www.vishay.com 26 To contact us: [email protected] Document Number: 26503 Revision: 11-Jun-07 F1772-2000 AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) Vishay Roederstein APPLICATION NOTES • For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC). • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • These capacitors can be used for series impedance application in case safety approvals are requested. • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC) and divided by the applied voltage. Document Number: 26503 Revision: 11-Jun-07 To contact us: [email protected] www.vishay.com 27 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1