FEATURES PETERMANN - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - AVAILABLE IN 5.0 AND 3.3 VOLT - VERY LOW PERIOD JITTER RMS 8 PS MAX. TECHNIK Time & Frequency Components - EXTENDED TEMPERATURE RANGE TO -40/+85°C DPS Plastic package 14 x 9.8 x 4.7 mm³ 1.5 ~ 125.0 MHz 5.0 VOLT FREQUENCY RANGE 1.5 ~ 125.0 MHz 3.3 VOLT FREQUENCY STABILITY +-15 ~ +-100 PPM -10/+60°C ~ -40/+85°C OPERATING TEMPERATURE RANGE -55/+125°C STORAGE TEMPERATURE RANGE VOLTAGE +5.0 VDC +-10% +3.3 VDC +-10% 30 mA max. < 24.0 MHz 15 mA max. < 24.0 MHz INPUT 40 mA max. < 50.0 MHz 20 mA max. < 50.0 MHz CURRENT 60 mA max. < 80.0 MHz 30 mA max. < 80.0 MHz 80 mA max. < 125.0 MHz 40 mA max. < 125.0 MHz STANDARD 40/60% SYMMETRY OPTION 45/55% RISE AND FALL TIME 10 ns max. 0.4 V max. "0" LEVEL TTL 5 VOLT "1" LEVEL +2.4 V min. OUTPUT "0" LEVEL 0.4 V (10% VDD) max. HCMOS 5 VOLT "1" LEVEL +4.5 V (90%VDD) min. 0.1 V (10% VDD) max. "0" LEVEL HCMOS 3.3 VOLT +2.97 V (90%VDD) min. "1" LEVEL TTL 1 ~ 10 TTL LOAD HCMOS 15 ~ 50 pF STANDARD WITHOUT ENABLE/DISABLE FUNCTION PIN 1 OPTION WITH ENABLE/DISABLE FUNCTION PERIOD JITTER RMS 8 ps max. OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE PART NUMBERING SYSTEM DPS3-1109-S-E-50-W-27.000MHz-T EXAMPLE SERIES SYMMETRY PIN 1 ENABLE/DISABLE FREQUENCY STABILITY TEMPERATURE RANGE FREQUENCY TAPE AND REEL DPS FOR 5 VOLT DPS3 FOR 3.3 VOLT BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR 100 PPM ANY 15 ~ 50 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C FREQUENCY IN MHz -T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components TEST CIRCUIT CMOS OUTLINE DRAWING OF DPS #3 1.52 4.06 4.7max + 0.51 5.08 #2 14.0max mA M TEST POINT #14 + + 0.25min 8.65 9.8max #4 VM - POWER SUPPLY VCC OUT OSCILLATOR 0,1µF GND #1 0.25 - 3.0 3.8 1.3 TEST CIRCUIT TTL FUNCTION E/D(TriState)/INC GROUND OUTPUT VDD + Unit:mm mA M POWER SUPPLY #14 VM - RL=390 #8 VDD OUT OSCILLATOR 0,1µF GND #1 - (CMOS LOAD) TEST POINT - + + OUTPUT WAVE FORM CMOS tr #7 NOTE: CL includes probe and fixture capacitance 5.8 3.0 1.3 CL=15pF TRI-STATE-INPUT 7.62 PIN #1 #2 #3 #4 #8 1N4148 or Equiv CL=15pF #7 TRI-STATE-INPUT tf NOTE: CL includes probe and fixture capacitance VOH 90%VDD 50%VDD REFLOW SOLDERING PROFILE 10%VDD VOL Th DUTY=Th/T 240°C T REFLOW 240°C max. 4°C/s max. TEMPERATURE 10s max. OUTPUT WAVE FORM TTL (TTL LOAD) COOLING 150°C 25°C tr 1 - 2 minutes tf VOH 2.4V 1.4V 0.4V VOL Th DUTY=Th/T T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] TIME