JDP2S01AFS TOSHIBA Diode Silicon Epitaxial PIN Type JDP2S01AFS UHF~VHF Band RF Switch Applications Unit: mm Suitable for reducing set’s size as a result from enabling high-density mounting due to 2-pin small packages. · Low series resistance: rs = 0.65Ω(typ.) · Low capacitance: CT = 0.65 pF (typ.) 0.6±0.05 Rating Unit Reverse voltage VR 30 V Forward current IF 50 mA Junction temperature Tj 150 °C Tstg −55~150 °C Storage temperature range 0.07 M A 1.0±0.05 0.2 ±0.05 0.1±0.05 0.1 Symbol 0.8±0.05 ｶｿｰﾄﾞﾏｰｸ Maximum Ratings (Ta = 25°C) Characteristics A 0.1 · 0.48+0.02 -0.03 JEDEC ― JEITA ― TOSHIBA 1-1L1A Weight: 0.0006 g Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Reverse voltage VR IR = 10 µA 30 ¾ ¾ V Reverse current IR VR = 30 V ¾ ¾ 0.1 µA Forward voltage VF IF = 50 mA ¾ 0.86 0.92 V Capacitance CT VR = 1 V, f = 1 MHz ¾ 0.65 0.8 pF Series resistance rs IF = 10 mA, f = 100 MHz ¾ 0.65 1 Ω Note: Signal level when capacitance is measured. Vsig = 100 mVrms Marking 1 1 2003-2-21 JDP2S01AFS CT – VR 5 rs – IF 500 f = 1 MHz Ta = 25°C 3 (9) (pF) 1 Series resistance rs Capacitance CT Ta = 25°C f = 0.1 GHz Vsig = 20 mVrms 0.5 0.3 Tester: HP4291A 0.5 100 1.0 1.5 10 1.5 1.0 0.1 0.1 0.3 1 Reverse voltage VR 3 10 0.5 1 (V) 0.5 0.01 f = 0.1 GHz 0.1 Forward current 2 1 IF 10 (mA) 2003-2-21 JDP2S01AFS RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2003-2-21