DinTek DTS03K16 N-channel 16v (dâ s) mosfet trenchfet power mosfet Datasheet

DTS03K16
www.din-tek.jp
N-Channel 16V (D−S) MOSFET
FEATURES
PRODUCT SUMMARY
V(BR)DSS
Min (V)
16
D TrenchFETr Power MOSFET
ID (A)
rDS(on)
DS( )
Max (W)
VGS(th) (V)
1.0 @ VGS = 10 V
DTS03K16 DTS03K16A
1 0 to 3
1.0
3.0
0
1.4 @ VGS = 4.5 V
0.42
0.64
0.35
0.53
APPLICATIONS
D Direct Logic-Level Interface: TTL/CMOS
D Drivers: Relays, Solenoids, Lamps, Hammers,
Displays, Memories, Transistors, etc.
D Battery Operated Systems
D Solid-State Relays
TO-236
(SOT-23)
G
D
1
3
S
D
G
2
S
Top View
N-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS (TA = 25_C UNLESS OTHERWISE NOTED)
Limit
Parameter
Symbol
DTS03K16
DTS03K16A
Drain-Source Voltage
VDS
16
Gate-Source Voltage
VGS
"8
Continuous Drain Current (TJ = 150_C)
TA= 25_C
TA= 70_C
Pulsed Drain Currenta
Power Dissipation
Thermal Resistance, Junction-to-Ambient
Operating Junction and Storage Temperature Range
ID
IDM
TA= 25_C
TA= 70_C
PD
RthJA
TJ, Tstg
V
0.42
0.64
0.33
0.51
0.8
1.5
0.35
0.8
0.22
0.51
357
156
−55 to 150
Unit
A
W
_C/W
_C
Notes
a. Pulse width limited by maximum junction temperature.
1
DTS03K16
www.din-tek.jp
SPECIFICATIONS (TA = 25_C UNLESS OTHERWISE NOTED)
Limits
Parameter
Symbol
Test Conditions
Min
Typ
Max
V(BR)DSS
VGS = 0 V, ID = 10 mA
16
VGS(th)
VDS = VGS, ID = 0.25 mA
1.0
2.0
3.0
Gate-Body Leakage
IGSS
VDS = 0 V, VGS = "20 V
"100
Zero Gate Voltage Drain Current
IDSS
VDS = 16 V, VGS = 0 V
1
VDS = 16 V, VGS = 0 V, TJ = 55_C
10
On State Drain Currenta
On-State
ID(on)
D( )
Unit
Static
Drain-Source Breakdown Voltage
Gate-Threshold Voltage
Drain-Source On-Resistancea
VDS = 10 V
V, VGS = 8
10VV
Diode Forward Voltage
0.5
DTS03K16A
0.8
nA
mA
A
VGS = 4.5 V, ID = 0.1 A
0.8
1.4
VGS = 10 V, ID = 0.3 A
0.47
1.0
gfs
VDS = 10 V, ID = 0.3 A
550
VSD
IS = 0.3 A, VGS = 0 V
0.85
1.2
1000
1500
rDS(on)
Forward Transconductancea
DTS03K16
V
W
mS
V
Dynamicb
Total Gate Charge
Qg
Gate-Source Charge
Qgs
Gate-Drain Charge
Qgd
200
Gate Resistance
Rg
48
VDS = 16 V, VGS = 10 V
ID ^ 0.3 A
205
td(on)
Turn On Time
Turn-On
VDD = 15 V, RL = 50 W
ID ^ 0
0.3
3A
A, VGEN = 10 V
RG = 6 W
tr
td(off)
Turn-Off Time
tf
pC
W
4.5
8
8
15
9
15
6.3
12
ns
Notes
a. Pulse test: PW v300 ms duty cycle v2%.
b. Guaranteed by design, not subject to production testing.
TYPICAL CHARACTERISTICS (25_C UNLESS NOTED)
Output Characteristics
Transfer Characteristics
1.0
0.8
VGS = 10 thru 5 V
0.7
4V
0.8
I D − Drain Current (A)
I D − Drain Current (A)
0.6
0.5
0.4
0.3
0.2
3V
0.6
0.4
TJ = 125_C
0.2
0.1
0.0
0.0
25_C
2V
0.4
0.8
1.2
1.6
VDS − Drain-to-Source Voltage (V)
2
−55_C
0.0
2.0
0
1
2
3
4
VGS − Gate-to-Source Voltage (V)
5
DTS03K16
www.din-tek.jp
TYPICAL CHARACTERISTICS (25_C UNLESS NOTED)
Capacitance
50
1.2
40
C − Capacitance (pF)
r DS(on) − On-Resistance ( W )
On-Resistance vs. Drain Current
1.5
VGS = 4.5 V
0.9
VGS = 8 V
0.6
0.3
0.0
0.0
Ciss
30
Coss
20
Crss
10
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0
0.8
4
ID − Drain Current (A)
Gate Charge
On-Resistance vs. Junction Temperature
VDS = 16 V
ID = 0.3 A
r DS(on) − On-Resistance ( W)
(Normalized)
V GS − Gate-to-Source Voltage (V)
20
1.6
8
6
4
2
VGS = 8 V
ID = 0.3 A
1.4
1.2
VGS = 4.5 V
ID = 0.1 A
1.0
0.8
0
0.0
0.2
0.4
0.8
0.6
0.6
−50
1.0
−25
0
Qg − Total Gate Charge (nC)
25
50
75
100
125
150
TJ − Junction Temperature (_C)
Source-Drain Diode Forward Voltage
On-Resistance vs. Gate-to-Source Voltage
2.4
3
1
TJ = 150_C
r DS(on) − On-Resistance ( W )
I S − Source Current (A)
16
12
VDS − Drain-to-Source Voltage (V)
10
0.1
0.01
0.001
0.0
8
TJ = 25_C
2.0
1.6
ID = 0.3 A
1.2
0.8
0.4
0.0
0.2
0.4
0.6
0.8
1.0
VSD − Source-to-Drain Voltage (V)
1.2
1.4
0
4
8
12
14
16
VGS − Gate-to-Source Voltage (V)
3
DTS03K16
www.din-tek.jp
TYPICAL CHARACTERISTICS (25_C UNLESS NOTED)
Threshold Voltage
0.4
V GS(th) Variance (V)
0.2
ID = 250 mA
−0.0
−0.2
−0.4
−0.6
−50
−25
0
25
50
75
100
125
150
TJ − Temperature (_C)
Safe Operating Area (TO-236, DTS03K16 Only)
Safe Operating Area (TO-226AA, DTS03K16A Only)
10
10
IDM
Limited
rDS(on) Limited
rDS(on) Limited
10 ms
0.1
ID(on)
Limited
100 ms
1s
10 s
dc
TA = 25_C
Single Pulse
0.01
BVDSS Limited
0.001
0.1
1
1 ms
1
1 ms
I D − Drain Current (A)
I D − Drain Current (A)
1
IDM
Limited
0.1
0.01
10 ms
ID(on)
Limited
10
100
1s
dc
TA = 25_C
Single Pulse
BVDSS Limited
0.001
0.1
VDS − Drain-to-Source Voltage (V)
100 ms
10 s
1
10
100
VDS − Drain-to-Source Voltage (V)
Normalized Thermal Transient Impedance, Junction-to-Ambient (TO-236, DTS03K16 Only)
Normalized Effective Transient
Thermal Impedance
2
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
Single Pulse
0.01
10−4
4
10−3
10−2
10−1
1
Square Wave Pulse Duration (sec)
10
100
600
DTS03K16
www.din-tek.jp
TYPICAL CHARACTERISTICS (25_C UNLESS NOTED)
Normalized Thermal Transient Impedance, Junction-to-Ambient (TO-226AA, DTS03K16A Only)
Normalized Effective Transient
Thermal Impedance
2
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
Single Pulse
0.01
10−4
10−3
10−2
10−1
1
Square Wave Pulse Duration (sec)
10
100
600
5
Package Information
www.din-tek.jp
SOT-23 (TO-236): 3-LEAD
b
3
E1
1
E
2
e
S
e1
D
0.10 mm
C
0.004"
A2
A
C
q
Gauge Plane
Seating Plane
Seating Plane
C
A1
Dim
0.25 mm
L
L1
MILLIMETERS
INCHES
Min
Max
Min
Max
A
0.89
1.12
0.035
0.044
A1
0.01
0.10
0.0004
0.004
A2
0.88
1.02
0.0346
0.040
b
0.35
0.50
0.014
0.020
c
0.085
0.18
0.003
0.007
D
2.80
3.04
0.110
0.120
E
2.10
2.64
0.083
0.104
E1
1.20
1.40
0.047
e
e1
L
1.90 BSC
0.40
L1
q
0.0748 Ref
0.60
0.016
0.64 Ref
S
0.024
0.025 Ref
0.50 Ref
3°
0.055
0.0374 Ref
0.95 BSC
0.020 Ref
8°
3°
8°
ECN: S-03946-Rev. K, 09-Jul-01
DWG: 5479
1
Application Note
www.din-tek.jp
0.049
(1.245)
0.029
0.022
(0.559)
(0.724)
0.037
(0.950)
(2.692)
0.106
RECOMMENDED MINIMUM PADS FOR SOT-23
0.053
(1.341)
0.097
(2.459)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index Return to Index
APPLICATION NOTE
1
Legal Disclaimer Notice
Disclaimer
www.din-tek.jp
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical
requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death.
Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
1
Similar pages