HTRN www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, High Temperature (215 °C); Thin Film Surface Mount, Dual-In-Line Resistor Network FEATURES • • • • • • • • • • HTRN series resistor networks feature four isolated resistors with standard 50 mil pitch lead spacing. HTRN is ideal to be used in oil/gas exploration industry, automotive under the hood applications, and aerospace engine control high temperature applications. The networks feature close TCR tracking and tight ratio tolerance and are ideally suited for unity gain operational amplifier circuitry. The standard resistance offering listed are available for immediate delivery. R1 7 R2 1 6 R2 2 5 R1 3 TYPICAL PERFORMANCE TCR TOL. ABSOLUTE TRACKING 25 5 ABSOLUTE RATIO 0.1 0.05 STANDARD RESISTANCE OFFERING (R1/R2) RATIO R1 R2 100:1 100K 1K 50:1 50K 1K 25:1 25K 1K 20:1 20K 1K 10:1 10K 1K 5:1 10K 2K 2:1 10K 5K 4:1 4K 1K Note • Consult factory for additional values and schematics SCHEMATIC 8 Ratio tolerance to ± 0.05 % Ratio stability ± 0.1 % - 55 °C to 215 °C operating temperature range 0.068" (1.73 mm) maximum seated height Rugged molded case construction with no internal solder Low temperature coefficient (± 25 ppm/°C) JEDEC MS-012 STD variation AA package Gold terminations for durable attach bonds Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC 61249-2-21 definition 4 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 12-Dec-11 SPECIFICATIONS Passivated nichrome 8 1000 to 100 k per resistor ± 25 ppm/°C ± 5 ppm/°C 0.1 % 0.05 % 100 mW 400 mW R ± 0.5 % R ± 0.1 % 0.1 ppm/V (typical) 100 V max. not to exceed P x R - 55 °C to + 215 °C - 55 °C to + 215 °C < - 30 dB 0.08 μV/°C R ± 0.01 % R ± 0.002 % CONDITIONS - 55 °C to + 125 °C - 55 °C to + 125 °C + 25 °C + 25 °C Maximum at + 70 °C Maximum at + 70 °C 2000 h at + 215 °C at 25 % rated power 2000 h at + 215 °C at 25 % rated power 1 year at + 25 °C 1 year at + 25 °C Document Number: 60111 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HTRN www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters Resistance Value Code C F HTRN A DIMENSION E B xxxx G Date Code H I MILLIMETERS A 0.157 3.99 B 0.0165 ± 0.0025 0.4 ± 0.06 C 0.050 1.27 D 0.195 max. 4.93 E 0.008 ± 0.001 0.20 ± 0.03 F 0.028 ± 0.001 0.71 ± 0.02 G 0.239 ± 0.005 6.07 ± 0.13 H 0.068 max. 1.73 I 0.008 ± 0.002 0.22 ± 0.06 Ø 2° to 6° 2° to 6° ø D INCHES Seating Plane Note • Marking - Vishay symbol, part number from ordering information MECHANICAL SPECIFICATIONS DERATING CURVE Passivated nichrome Substrate Material Silicon Body 100 Percent of Rated Power Resistive Element Molded epoxy Terminals Copper 100 % = 0.40 W 75 50 25 0 Termination Finish 0 Plated Ni/Pd/Au 70 215 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: HTRN5-1UF H T R N 5 GLOBAL MODEL (4 digits) RESISTANCE (3, 4 or 5 digits) HTRN 2-1 4-1 5-1 10-1 20-1 25-1 50-1 100-1 - 1 U F PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Revision: 12-Dec-11 Document Number: 60111 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000