PRODUCT DATASHEET Lena series last update 2/11/2016 DETAILS Product Number CN14088_LENA-WAS-DL Family Lena Type RefPack Color metal Diameter 111 mm Height 39,12 mm Style round Optic Material PC Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 2/11/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector VERO13 asymmetric degAsymmetric 87 % 1.050 - VERO18 Asymmetric degAsymmetric 86 % 0.930 - V10 Gen7 sim: AsymmetricAsymmetric sim: 84 % sim: 1.110 Bender Wirth: 434 Typ L1 V13 Gen7 sim: AsymmetricAsymmetric sim: 84 % sim: 1.030 Bender Wirth: 477 Typ L1 CLL03x/CLU03x Asymmetric degAsymmetric 85 % 0.870 Bender Wirth: 433 Typ L1 CLU720/721 Asymmetric degAsymmetric 85 % 0.940 Bender Wirth: 433 Typ L1 CLU700/701 Asymmetric degAsymmetric 84 % 1.000 Bender Wirth: 434 Typ L1 CXA/B 1816 & CXA/B 1820 & CXA 1850 Asymmetric degAsymmetric 84 % 0.920 Bender Wirth: 437 Typ L1 CXA/B 15xx Asymmetric degAsymmetric 85 % 1.000 Bender Wirth: 441 Typ L1 LUXEON CoB 1202/1203 Asymmetric degAsymmetric 84 % 1.000 Bender Wirth: 438 Typ L1 CXM-14 sim: AsymmetricAsymmetric sim: 85 % sim: 0.870 Bender Wirth: 433 Typ L1 COB L-Type (LES 9) Asymmetric degAsymmetric 84 % 0.930 Bender Wirth: 438 Typ L1 COB L-Type (LES 11) Asymmetric degAsymmetric 84 % 0.920 Bender Wirth: 438 Typ L1 COB J-Type Asymmetric degAsymmetric 84 % 0.860 Bender Wirth: 463 Typ L2 Soleriq P13 Asymmetric degAsymmetric 85 % 0.900 Bender Wirth: 437 Typ L1 Soleriq P9 Asymmetric degAsymmetric 85 % 0.890 Bender Wirth: 461 Typ L1 Soleriq S13 Asymmetric degAsymmetric 84 % 1.000 Bender Wirth: 437 Typ L1 ZC12/18 sim: AsymmetricAsymmetric sim: 85 % sim: 0.870 Bender Wirth: 433 Typ L1 May 29th 2017 5:36 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H With optional diffusion lens 37.01 39.12 4 4 111 75 3.2 3 3 29 LED position 85 .7 6 Socket 2 2 INDEX PART NO MATERIAL COLOUR 1 Socket PC White 2 Reflector PC White Reflector Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE DATA SHEET LENA-X-WAS-VERO13-18 SIZE A3 SCALE H G PART NUMBER 1:1 WEIGHT - B SHEET A 1/1 1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.