LCS Series Subminiature Sealed Snap-acting Switches Features/Benefits • Compact design • Long life and high electrical capacity • Quick connect, solder terminals, Typical Applications • Motorized equipment • Sump pump • Thermostatic controls • Computers • Air conditioners PC terminals, wire leads • Wide variety of actuator styles • RoHS compatible, RoHS compliant • IP67 14 Models Available Specifications Materials 14 Snap-acting J CONTACT RATING: 6 AMP, 250 V AC and 5 AMP, 125/250 V AC 0.1 AMP, 125/250 V AC ELECTRICAL LIFE: 10,000 cycles INSULATION RESISTANCE: 100 M ohm min. DIELECTRIC STRENGTH: 1,000 VAC OPERATING TEMPERATURE: 0ºC to +120ºC (without wire) 0ºC to +85ºC (with UL1007 wire) 0ºC to +105ºC (with UL1015 wire) 0ºC to +105ºC (with UL1430 wire) 0ºC to +80ºC (with UL1061 wire) 0ºC to +120ºC (with UL1330 wire) OPERATING FORCE: (see ACTUATOR’S option sections). MOUNTING: 2-56 screws, torque 2.3 in/lbs max. SWITCH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 94V-0). ACTUATOR BUTTON: Thermoplastic polyester. SPRING: Copper alloy. PIVOT: Copper alloy. MOVABLE CONTACTS: Silver nickel STATIONARY CONTACTS: Silver nickel on copper alloy. TERMINALS: Copper alloy. ACTUATOR LEVEL: Stainless steel. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-27 thru J-29. For additional options not shown in catalog, consult Customer Service Center. L C S Series LCS Contact Rating 05 5 AMP, 125/250 V AC 6 AMP, 250 V AC 01 0.1 AMP, 125/250 V AC 14 Operating Force 1 150 grams 2 203 grams Actuator P00 Pin plunger T00 11.9 mm short lever T05 17.4 mm short lever T07 19.4 mm short lever T13 25.5 mm lever T19 33.3 mm lever T28 40.7 mm lever T43 55.9 mm lever S26 18.6 mm simulated lever A05 17.2 mm lever roller Circuitry C SPDT W SPST N.C. Y SPST N.O. Terminations S Solder Q 0.110 Quick Connect P PC Thru Hole W Wire leads potted Z Wire leads non-potted Wire Type AWG 20 20 AWG 22 22 AWG 24 24 AWG 26 26 AWG 28 28 AWG 30 30 AWG Wire UL # (when required) A UL1007 B UL1015 C UL1430 D UL1061 E UL1330 Wire Side (when required) A Wire out the bottom B Wire out the right side C Wire out the left side D None Dimensions are shown: mm Specifications and dimensions subject to change J–26 www.ck-components.com LCS Series Subminiature Sealed Snap-acting Switches SERIES LCS 19.8 2.2 6.4 7.5 9.8 9 2.3±0.1 1.6 TYP 2.35 3.2 TYP 2.3 ± 0.1 TYP J 2.6±0.1 9.5±0.15 7.5± 0.2 2.8 TYP TYP 0.5± 0.05 TYP ELECTRICAL RATING RoHS COMPLIANT * RoHS COMPATIBLE * OPTION CODE YES YES 05 YES YES 01 ELECTRICAL RATING 5 AMP, 125/250 V AC 6 AMP, 250 V AC 0.1 AMP, 125/250 V AC OPERATING FORCE OPTION CODE OPERATING FORCES (grams) 1 2 150 g. max. 203 g. max. Dimensions are shown: mm Specifications and dimensions subject to change J–27 www.ck-components.com Snap-acting 2.4±0.1 LCS Series Subminiature Sealed Snap-acting Switches ACTUATOR P00 T07 T19 7.5 33.3 A05 13.2 ref T28 0.2 ref. 17.2 19.4 28.35 ref. T00 4.4 ref. 7.15 ref. 20.95 ref. T13 40.7 6.1 ref. S26 18.6 25.50 11.9 J 43.55 ref. T43 T05 5.05 ref. Snap-acting 55.9 17.4 C C C C E D B B ACTUATOR OPTION CODE A mm LENGTH OF LEVER B mm OVER TRAVEL (MIN) P00 T00 T05 T07 T13 button 11.9 17.40 19.40 25.5 0.6 0.6 0.9 1 1.6 T19 T28 33.3 40.7 T43 S26 A05 55.9 18.6 17.20 D C D E mm mm mm PRE OPERATING FREE TRAVEL POSITION POSITION (MAX) (MAX) 1.2 3.2 4.3 4.8 6.3 8.4 ± .3 8.8 ± .9 8.8 ± 1.1 8.8 ± 1.2 8.8 ±1.6 9.9 11.1 12 12.4 13.5 1.95 8.0 8.8 ±2.0 15.0 2.1 2.9 1 0.9 10.1 13.8 4.6 4.3 8.8 ± 2.6 8.8 ± 3.5 10.7 ±1.2 14.5 ±1.1 16.3 19.1 14.1 17.7 E E D D DIFF. MOTION (MAX) mm 150 grams 0.2 0.5 0.6 0.7 0.9 1.75 2.3 3.6 0.95 0.6 OPERATING FORCE (MIN) Grams RELEASE FORCE (MIN) Grams 203 grams 150 grams 203 grams 150 grams 203 grams 0.2 150 0.5 0.6 66 73 55 29 32 203 98 82 66 54 30 10 14 11 6 2 50 21 16 13 11 5 1 1 7 12 8 7 14 15 0.7 0.9 1.75 1.4 2.0 0.65 0.6 33 23 42 60 40 39 33 68 72 Dimensions are shown: mm Specifications and dimensions subject to change J–28 www.ck-components.com E LCS Series Subminiature Sealed Snap-acting Switches TERMINATIONS S Q SOLDER QUICK CONNECT 2.8mm / 0.110” 1.6 TYP 3.2 TYP 2.4 6.95 1.2 TYP 7.5 ± 0.2 TYP 7.5 ± 0.1 TYP P Z or W PC THRU HOLE “A” WIRE ORIENTATION 15.95 8.5 4.00 TYP RECOMENDED MOUNTING PATTERN 7.5 ± 0.2 TYP 304.8 ± 6.4 3X 1.35 /1.5 3±1 7.5 ± 0.1 TYP C: BLACK Z or W “B” WIRE ORIENTATION “Y” OR “W” CIRCUITRY NO: BLUE NC: GRAY J “C” WIRE ORIENTATION “Y” OR “W” CIRCUITRY BLACK COM BLUE NO BLACK COM BLUE NO 8.5 8.5 3±1 21.3 Z or W 3±1 6.4 6.4 12± 0.1 12±0.1 Z or W “B” WIRE ORIENTATION “C” CIRCUITRY “C” WIRE ORIENTATION “C” CIRCUITRY BLACK COM GRAY NC BLUE NO BLACK COM GRAY NC BLUE NO 12.3 21.3 12.3 3±1 6.4 3±1 21.3 6.4 12 ± .1 21.3 12±0.1 CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) Dimensions are shown: mm Specifications and dimensions subject to change J–29 www.ck-components.com Snap-acting Z or W 15±0.1