ABS2 THRU ABS10 SINGLE PHASE 0.8AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface mount application Plastic material-UL flammability 94V-0 ABS 0.165(4.2) 0.150(3.8) 0.010(0.25) 0.006(0.15) 0.268(6.8) 0.236(6.0) 0.268(6.8) 0.236(6.0) 0.181(4.6) 0.165(4.2) Mechanical Data · Case: SOPA-4, molded plastic ABS · Terminals: plated leads solderable per 0.032(0.7) 0.024(0.5) MAX 0.0078(0.2) MIL-STD-202, Method 208 · Polarity: as marked on case · Mounting position: Any · Marking: type number 0.209(5.3) 0.189(4.8) 0.058(1.5) 0.046(1.2) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL ABS2 ABS4 ABS6 ABS8 ABS10 UNITS 200 400 600 800 1000 V 140 280 420 560 700 V VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRWM RMS Reverse Voltage VRMS VDC IO 0.5 0.8 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Forward Voltage per element VFM 0.95 V IR 5.0 500 uA RθJA 62.5 RθJL 25 TJ,TSTG -55to+150 Average Rectified Output Current (Note 1)@TA=30℃ (Note 2)@TA=30℃ Peak Reverse Current At Rated DC Blocking Voltage @IF=0.4A @TA =25℃ @TA =125 ℃ Typical Thermal Resistance per leg (Note 3) Operating and Storage Temperature Range ℃/W ℃ Note:1. Mounted on glass epoxy PC board with 1.3mm 2 solder pad. 2. Mounted on aluminum substrate PC board with 1.3mm 2 solder pad. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. version:01 1 of 2 www.dyelec.com ABS2 THRU ABS10 FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE 10 INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD CURRENT (A) 1.2 FIG. 2 TYPICAL FORWARD CHARACTERISTIC 1.0 0.8 0.6 0.4 0.2 0 0 30 60 90 120 AMBIENT TEMPERATURE 150 1 0.1 0 0.6 0.4 0.8 1.0 1.2 1.4 FORWARD VOLTAGE (V) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 4 TYPICAL REVERSE CHARACTERISTICS 100 50 8.3ms Single Half Sine-Wave 40 30 20 10 1 10 NUMBER OF CYCLES AT 60 Hz 100 INSTANTANEOUS REVERSE CURRENT (uA) PEAK FORWARD SURGE CURRENT (A) 0.2 ( oC) TA=125℃ 10 1 TA =75 ℃ 0.1 TA =25 ℃ 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLYAGE(%) version:01 2 of 2 www.dyelec.com 140