MUR3020PT, MUR3030PT, MUR3040PT, MUR3060PT Ultra Fast Recovery Diodes A C A Dimensions TO-247AD A C A C(TAB) A=Anode, C=Cathode, TAB=Cathode MUR3020PT MUR3030PT MUR3040PT MUR3060PT VRSM V 200 300 400 600 Symbol IFRMS IFAVM IFRM IFSM Test Conditions Inches Min. Max. A B 19.81 20.32 20.80 21.46 0.780 0.819 0.800 0.845 C D 15.75 16.26 3.55 3.65 0.610 0.140 0.640 0.144 E F 4.32 5.4 5.49 6.2 0.170 0.212 0.216 0.244 G H 1.65 - 2.13 4.5 0.065 - 0.084 0.177 J K 1.0 10.8 1.4 11.0 0.040 0.426 0.055 0.433 L M 4.7 0.4 5.3 0.8 0.185 0.016 0.209 0.031 N 1.5 2.49 0.087 0.102 Unit TVJ=TVJM TC=100oC; rectangular, d=0.5 tp<10us; rep. rating, pulse width limited by TVJM 25 30 150 A TVJ=45oC t=10ms (50Hz), sine t=8.3ms (60Hz), sine t=10ms(50Hz), sine t=8.3ms(60Hz), sine 100 110 85 95 A t=10ms (50Hz), sine t=8.3ms (60Hz), sine t=10ms(50Hz), sine t=8.3ms(60Hz), sine 50 50 36 37 A2s TVJ=150oC TVJ=150oC -40...+150 150 -40...+150 TVJ TVJM Tstg Ptot TC=25oC Md Mounting torque Weight Millimeter Min. Max. Maximum Ratings TVJ=45oC I2t VRRM V 200 300 400 600 Dim. o C 62 W 0.4...0.6 Nm 2 g MUR3020PT, MUR3030PT, MUR3040PT, MUR3060PT Ultra Fast Recovery Diodes Symbol Test Conditions Characteristic Values typ. max. Unit IR TVJ=25oC; VR=VRRM TVJ=25oC; VR=0.8.VRRM TVJ=125oC; VR=0.8.VRRM 50 25 3 uA uA mA VF IF=15A; TVJ=150oC TVJ=25oC 1.5 1.7 V VTO For power-loss calculations only 1.12 V TVJ=TVJM 23.2 rT RthJC RthCK RthJA trr IRM m 2 K/W 0.5 60 IF=1A; -di/dt=50A/us; VR=30V; TVJ=25oC o _ VR=350V; IF=15A; -diF/dt=100A/us; L<0.05uH; TVJ=100 C 35 50 ns 4 4.4 A FEATURES APPLICATIONS ADVANTAGES * International standard package JEDEC TO-247AD * Planar passivated chips * Very short recovery time * Extremely low switching losses * Low IRM-values * Soft recovery behaviour * Rectifiers in switch mode power supplies (SMPS) * Uninterruptible power supplies (UPS) * Ultrasonic cleaners and welders * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses * Operating at lower temperature or space saving by reduced cooling MUR3020PT, MUR3030PT, MUR3040PT, MUR3060PT Ultra Fast Recovery Diodes Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Fig. 7 Transient thermal impedance junction to case.