Medical PSU FSP150-KBAM1 DESCRIPTION This series of AC /DC switching power supplies are for 132150 watts of continuous output power. They are enclosed in a 94 V-1 rated polyphenylene-oxide case with an IEC 320/C 14 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FC C class B emission limits, and are designed for medical application not for life-supporting equipment. FEATURES Low safety ground leakage current Wide input range 90 to 264 VAC Optional output connectors 100% burn-in Over voltage protection Over current protection C ompliant with C EC and Energy Star Efficiency level V requirements No load power consumption less than 0.5 W Average active efficiency ≧ 87% C ompliant with RoHS requirements W ATTAGE Wattage: 150W DIMENSION Dimension: SAFETY STANDARD APPAOVAL OUTPUT SPECIFICATION Ripple & Noise: Over Current Protection: ENVIRONMENTAL SPECIFICATION 207.6mm(L) x 82.0mm(W) x 49.7mm(H) TEMP.Range: INPUT SPECIFICATION Input Range: Input Frequency: Input Current: Leakage Current: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Protected to short circuit conditions 90-264 Vdc 47-63 Hz 2.0A(rms) for115VAC , 1.0A(rms) for230VAC 220 µA max. @ 264 VAC ,63 Hz Operating Temperature:0°C to +60°C Storage Temperature: -20°C to + 85℃ OUTPUT ELECTRICAL Single Output: 19 V/ 7.9 A NOTES 1. C lass I models are equipped with IEC 320/C 14 inlet. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice