CLD-DS36 Rev 9D Product family data sheet Cree® XLamp® MT-G EasyWhite® LEDs Product Description FEATURES Table of contents The XLamp® MT-G EasyWhite® LED • Cree EasyWhite color temperatures from 2700 K to 5000 K CCT Characteristics........................................ 2 • Wide range of operating power - up to 25 W maximizes lumen density, eliminates chromaticity binning and enables luminaire and bulb manufacturers to Codes and Bins - 6 V............................... 3 Flux Characteristics, EasyWhite® Order • 85 °C binning and characterization • Two voltage options: 6 V, 36 V • Low effective thermal resistance: 1.5 °C/W • High lumen density 94% smaller than the total area of the • Wide viewing angle: 120° Relative Luminous Flux vs. Current........ 9 corresponding ANSI C78.377 color region. • 80-minimum CRI at 2700 K and 3000 K CCT Typical Spatial Distribution................... 10 The XLamp MT-G EasyWhite LED is the • 85- and 90-minimum CRI available in 2700 K and 3000 K CCT Performance Groups – Chromaticity... 11 • Electrically neutral thermal path required from a single, small point source. • RoHS and REACh compliant Bin and Order Code Formats................ 12 Example • UL recognized component (E349212) Reflow Soldering Characteristics......... 13 deliver consistent color and high‑efficacy light output in a new, compact, multi‑die package. XLamp MT-G EasyWhite LEDs can reduce LED-to-LED color variation to within a 2‑step MacAdam ellipse, perfect choice for lighting applications where high luminous flux output is applications include: LED retrofit bulbs, commercial/retail display ® illumination applications. Codes and Bins - 36 V............................. 5 Relative Spectral Power Distribution..... 7 Relative Luminous Flux vs. Junction Temperature............................................ 7 Electrical Characteristics........................ 8 Performance Groups – Brightness...... 10 Cree EasyWhite® Color Temperatures Plotted on the 1931 CIE Curve............. 12 Notes..................................................... 14 Mechanical Dimensions....................... 16 spotlights, and other indoor general www.cree.com/Xlamp Flux Characteristics, EasyWhite® Order Applications Tape and Reel........................................ 17 • MR, PAR and other directional retrofit bulbs Packaging.............................................. 18 • Commercial/residential directional lighting • General illumination Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp ® MT-G EasyWhite ® LED Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Effective thermal resistance, junction to solder point Unit degrees Minimum Typical 120 V °C/W Maximum 8000 1.5 LED junction temperature °C DC forward current (6 V) mA 1100 4000 DC forward current (36 V) mA 185 700 Forward voltage (6 V, 1100 mA, 85 °C) V 5.6 6.7 Forward voltage (36 V, 185 mA, 85 °C) V 33.5 40.2 Temperature coefficient of voltage (6 V) mV/°C -4.5 Temperature coefficient of voltage (36 V) mV/°C -27 Reverse voltage (6 V) Reverse current (6V, 36 V) 150 V -5 mA 0.1 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C) The following tables provide order codes for 6-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code nomenclature, please reference page 12 of this document. Color CCT Range 5000 K 4000 K Standard CRI 3500 K 3000 K 2700 K 3000 K 85 CRI Minimum 2700 K Minimum Luminous Flux @ 1100 mA 2-Step Chromaticity Region 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H0 560 642 J0 600 688 K0 650 745 MTGEZW-00-0000-0B00K050H MTGEZW-00-0000-0B00K050F F0 480 550 MTGEZW-00-0000-0B00F040H MTGEZW-00-0000-0B00F040F G0 520 596 H0 560 642 J0 600 688 MTGEZW-00-0000-0B00J040H MTGEZW-00-0000-0B00J040F E0 440 504 MTGEZW-00-0000-0B00E035H MTGEZW-00-0000-0B00E035F F0 480 550 Order Code Chromaticity Region MTGEZW-00-0000-0B00H050H 50H 40H 35H MTGEZW-00-0000-0B00J050H MTGEZW-00-0000-0B00G040H MTGEZW-00-0000-0B00H040H MTGEZW-00-0000-0B00F035H MTGEZW-00-0000-0B00H050F 50F 40F 35F MTGEZW-00-0000-0B00J050F MTGEZW-00-0000-0B00G040F MTGEZW-00-0000-0B00H040F MTGEZW-00-0000-0B00F035F G0 520 596 H0 560 642 MTGEZW-00-0000-0B00H035H MTGEZW-00-0000-0B00H035F E0 440 504 MTGEZW-00-0000-0B00E030H MTGEZW-00-0000-0B00E030F F0 480 550 G0 520 596 H0 560 642 MTGEZW-00-0000-0B00H030H MTGEZW-00-0000-0B00H030F D0 400 458 MTGEZW-00-0000-0B00D027H MTGEZW-00-0000-0B00D027F E0 440 504 F0 480 550 G0 520 596 MTGEZW-00-0000-0B00G027H MTGEZW-00-0000-0B00G027F D0 400 458 MTGEZW-00-0000-0B0PD030H MTGEZW-00-0000-0B0PD030F E0 440 504 F0 480 550 D0 400 458 E0 440 504 30H 27H 30H MTGEZW-00-0000-0B00G035H Order Code MTGEZW-00-0000-0B00F030H MTGEZW-00-0000-0B00G030H MTGEZW-00-0000-0B00E027H MTGEZW-00-0000-0B00F027H MTGEZW-00-0000-0B0PE030H 30F 27F 30F MTGEZW-00-0000-0B0PF030H 27H MTGEZW-00-0000-0B0PD027H MTGEZW-00-0000-0B0PE027H MTGEZW-00-0000-0B00G035F MTGEZW-00-0000-0B00F030F MTGEZW-00-0000-0B00G030F MTGEZW-00-0000-0B00E027F MTGEZW-00-0000-0B00F027F MTGEZW-00-0000-0B0PE030F MTGEZW-00-0000-0B0PF030F 27F MTGEZW-00-0000-0B0PD027F MTGEZW-00-0000-0B0PE027F Notes: • • • • • • • * Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14). Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80. Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77. Minimum CRI for Standard color temperature 50F, 50H is 75. Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80. Minimum CRI for 85 CRI Minimum is 85. Minimum CRI for 90 CRI Minimum is 90. Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C) - Continued Color CCT Range 3000 K 90 CRI Minimum 2700 K Minimum Luminous Flux @ 1100 mA 2-Step Chromaticity Region 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* C0 370 424 D0 400 458 E0 440 504 MTGEZW-00-0000-0B0UE030H MTGEZW-00-0000-0B0UE030F B0 340 390 MTGEZW-00-0000-0B0UB027H MTGEZW-00-0000-0B0UB027F C0 370 424 D0 400 458 Order Code Chromaticity Region MTGEZW-00-0000-0B0UC030H 30H 27H MTGEZW-00-0000-0B0UD030H MTGEZW-00-0000-0B0UC027H MTGEZW-00-0000-0B0UD027H Order Code MTGEZW-00-0000-0B0UC030F 30F 27F MTGEZW-00-0000-0B0UD030F MTGEZW-00-0000-0B0UC027F MTGEZW-00-0000-0B0UD027F Notes: • • • • • • • * Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14). Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80. Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77. Minimum CRI for Standard color temperature 50F, 50H is 75. Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80. Minimum CRI for 85 CRI Minimum is 85. Minimum CRI for 90 CRI Minimum is 90. Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C) The following table provide order codes for 36-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code nomenclature, please reference page 12 of this document. Color CCT Range 5000 K 4000 K Standard CRI 3500 K 3000 K 2700 K 3000 K 85 CRI Minimum 2700 K Minimum Luminous Flux @ 185 mA 2-Step Chromaticity Region 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H0 560 642 J0 600 688 K0 650 745 MTGEZW-00-0000-0N00K050H MTGEZW-00-0000-0N00K050F F0 480 550 MTGEZW-00-0000-0N00F040H MTGEZW-00-0000-0N00F040F G0 520 596 H0 560 642 J0 600 688 MTGEZW-00-0000-0N00J040H MTGEZW-00-0000-0N00J040F E0 440 504 MTGEZW-00-0000-0N00E035H MTGEZW-00-0000-0N00E035F F0 480 550 Order Code Chromaticity Region MTGEZW-00-0000-0N00H050H 50H 40H 35H MTGEZW-00-0000-0N00J050H MTGEZW-00-0000-0N00G040H MTGEZW-00-0000-0N00H040H MTGEZW-00-0000-0N00F035H MTGEZW-00-0000-0N00H050F 50F 40F 35F MTGEZW-00-0000-0N00J050F MTGEZW-00-0000-0N00G040F MTGEZW-00-0000-0N00H040F MTGEZW-00-0000-0N00F035F G0 520 596 H0 560 642 MTGEZW-00-0000-0N00H035H MTGEZW-00-0000-0N00H035F E0 440 504 MTGEZW-00-0000-0N00E030H MTGEZW-00-0000-0N00E030F F0 480 550 G0 520 596 H0 560 642 MTGEZW-00-0000-0N00H030H MTGEZW-00-0000-0N00H030F D0 400 458 MTGEZW-00-0000-0N00D027H MTGEZW-00-0000-0N00D027F E0 440 504 F0 480 550 G0 520 596 MTGEZW-00-0000-0N00G027H MTGEZW-00-0000-0N00G027F D0 400 458 MTGEZW-00-0000-0B0PD030H MTGEZW-00-0000-0B0PD030F E0 440 504 F0 480 550 D0 400 458 E0 440 504 30H 27H 30H MTGEZW-00-0000-0N00G035H Order Code MTGEZW-00-0000-0N00F030H MTGEZW-00-0000-0N00G030H MTGEZW-00-0000-0N00E027H MTGEZW-00-0000-0N00F027H MTGEZW-00-0000-0B0PE030H 30F 27F 30F MTGEZW-00-0000-0B0PF030H 27H MTGEZW-00-0000-0B0PD027H MTGEZW-00-0000-0B0PE027H MTGEZW-00-0000-0N00G035F MTGEZW-00-0000-0N00F030F MTGEZW-00-0000-0N00G030F MTGEZW-00-0000-0N00E027F MTGEZW-00-0000-0N00F027F MTGEZW-00-0000-0B0PE030F MTGEZW-00-0000-0B0PF030F 27F MTGEZW-00-0000-0B0PD027F MTGEZW-00-0000-0B0PE027F Notes: • • • • • • • * Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14). Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80. Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77. Minimum CRI for Standard color temperature 50F, 50H is 75. Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80. Minimum CRI for 85 CRI Minimum is 85. Minimum CRI for 90 CRI Minimum is 90. Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C) - Continued Color CCT Range 3000 K 90 CRI Minimum 2700 K Minimum Luminous Flux @ 185 mA 2-Step Chromaticity Region 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* C0 370 424 D0 400 458 E0 440 504 MTGEZW-00-0000-0B0UE030H MTGEZW-00-0000-0B0UE030F B0 340 390 MTGEZW-00-0000-0B0UB027H MTGEZW-00-0000-0B0UB027F C0 370 424 D0 400 458 Order Code Chromaticity Region MTGEZW-00-0000-0B0UC030H 30H 27H MTGEZW-00-0000-0B0UD030H MTGEZW-00-0000-0B0UC027H MTGEZW-00-0000-0B0UD027H Order Code MTGEZW-00-0000-0B0UC030F 30F 27F MTGEZW-00-0000-0B0UD030F MTGEZW-00-0000-0B0UC027F MTGEZW-00-0000-0B0UD027F Notes: • • • • • • • * Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14). Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80. Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77. Minimum CRI for Standard color temperature 50F, 50H is 75. Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80. Minimum CRI for 85 CRI Minimum is 85. Minimum CRI for 90 CRI Minimum is 90. Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® MT-G EasyWhite ® LED Relative Spectral Power Distribution White - the only roboto graph The following graph represents typical spectral output of each die of the MT-G Relative Spectral Power Distribution (6 V, 1100 mA; 36 V, 185 mA; TJ= 85 °C) The following graph represents typical spectral output of the XLamp MT-G EasyWhite LED. 100% Relative Spectral Power 80% 60% Cool White Warm White 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 183.33 if @ 36V) The following graph represents typical performance of each LED die in the XLamp MT-G Relative Luminous Flux vs. Junction Temperature (6 V, 1100 ma; 36 V, 185 mA) The following graph represents typical performance of the XLamp MT-G EasyWhite LED. 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 20 40 60 80 100 120 140 Junction Temperature (ºC) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® MT-G EasyWhite ® LED Electrical Characteristics (Tsp = 85ºC) 6V Electrical Characteristics (TJ = 85 °C) 4000 3500 Current (mA) 3000 2500 2000 6V 1500 1000 500 0 5 5.25 5.5 36V 5.75 6 6.25 Forward Voltage( V) 700 600 Current (mA) 500 400 36 V 300 200 100 0 31 32 33 34 35 36 37 38 Forward Voltage( V) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® MT-G EasyWhite ® LED Relative Intensity vs. Current (Tsp = 85ºC) Relative Luminous Flux vs. Current (TJ = 85 °C) 300% Relative Luminous Flux 250% 200% 150% 6V 100% 50% 0% 0 500 1000 1500 2000 2500 3000 3500 4000 Forward Current, Pulsed (mA) 300% Relative Luminous Flux 250% 200% 36 V 150% 100% 50% 0% 0 100 200 300 400 500 600 700 Forward Current, Pulsed (mA) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® MT-G EasyWhite ® LED Spatial Distribution Typical Spatial Distribution The following graph represents typical performance of the XLamp MT-G EasyWhite LED. 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -60 0% -30 0 30 60 90 Angle (º) Performance Groups – Brightness (TJ = 85 °C) XLamp MT-G EasyWhite LEDs are tested for luminosity and placed into one of the following bins. Group Code Min. Luminous Flux @ 1100 mA, 6 V; @185 mA, 36 V Max. Luminous Flux @ 1100 mA, 6 V; @185 mA, 36 V A0 310 340 B0 340 370 400 C0 370 D0 400 440 E0 440 480 F0 480 520 G0 520 560 H0 560 600 J0 600 650 K0 650 700 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® MT-G EasyWhite ® LED Performance Groups – Chromaticity (TJ = 85 °C) XLamp MT-G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite® Color Temperatures – 4-Step EasyWhite® Color Temperatures – 4-Step Code 50F 40F 35F 30F 27F CCT 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3685 0.3784 0.3741 0.3837 0.3804 0.3818 0.3867 0.3857 x y 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 0.3744 0.3782 Code 50H 40H CCT 5000 K 4000 K 0.3912 0.3917 0.3863 0.3758 0.3844 0.3778 0.3981 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4395 0.4084 35H 30H 3500 K 3000 K 0.4449 0.4141 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 27H 2700 K Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® MT-G EasyWhite ® LED Cree EasyWhite® Color Temperatures Plotted on the 1931 CIE Curve (TJ = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700 K 3000 K 0.43 3500 K 0.42 4000 K 4500 K 0.41 CCy 0.40 5000 K 0.39 5700 K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code SSSCCC-BB-HHHH-NNNRNNNNN Series MTG = MT-G Series MTG = MT-G Internal code Internal code CRI Specification U = 90 CRI minimum P = 85 CRI minimum 0 = Standard CRI Flux bin CRI Specification U = 90 CRI minimum P = 85 CRI minimum H = Standard minimum Kit code Vf class B0 = 6-V class N0 = 36-V class Reel size 0 = 500 (standard) 1 = 100 (nonstandard) Color EZW = EasyWhite SSSCCC-BB-WWW-FF-NNRAAAA Internal Code Vf class B0 = 6-V class N0 = 36-V class Chromaticity bin Color EZW = EasyWhite Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® MT-G EasyWhite ® LED Reflow Soldering Characteristics In testing, Cree has found XLamp MT-G EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) IPC/JEDEC J-STD-020C Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® MT-G EasyWhite ® LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MT-G EasyWhite LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® MT-G EasyWhite ® LED Notes - Continued Vision Advisory WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 6 6 5 5 5 4 4 4 NOTICE NOTICE CE REE CONFIDENTIAL. THIS AND THE INFORMATION FIDENTIAL. THIS PLOT ANDPLOT THE INFORMATION S PLOT AND THE ONTAINED WITHIN ARE THE PROPRIETARY AND D WITHIN ARE THEINFORMATION PROPRIETARY AND HE PROPRIETARY AND ONFIDENTIAL INFORMATION CREE, THIS PLOT TIAL INFORMATION OF CREE,OF INC. THIS INC. PLOT ION OF CREE, INC. THIS PLOT AY NOT BEREPRODUCED COPIED, REPRODUCED OR DISCLOSED E COPIED, OR DISCLOSED TO ANY TO ANY NAUTHORIZED WITHOUT THE WRITTEN RODUCED OR PERSON DISCLOSED TO ANY RIZED PERSON WITHOUTTHE WRITTEN CONSENTCONSENT F CREE INC. WITHOUT THE WRITTEN CONSENT NC. 3 3 3 2 B B C C 6 5 D 5 .650 .650 4 8.900 6.000 MT-G 36 V 4.85 ±.25 8.90 .889 .500 .889 .889 1.090 1.090 1.090 .950 8.072 8.900 8.072 6.198 .650 .500 .937 1.722 1.722 8.90 .937 3.175 3.175 6.198 B B 6.000 6.0006.000 1.090 1.090 1.090 9.113 8.072 6.198 8.900 .889 .889 .889 .937 ANODE 3.175 1.722 .500 R4.100 3.175 3.175 .937 .937 3.175 6.000 R4.100 .937 DRAWN BYDRAWN BY DATE DRAWN BY DATE .950 .950 .950 .950 8.900 .500 .889 .500 5 8.900 4 4 3 4 SCALE 2 3 3 2 .937 2 DRAWING NO. SIZEDRAWING NO. C C REV. REV. DRAWING NO. 2610-00011 2610-00011 2610-00011 C CD SCALE 9.000 9.000 SCALE SHEETSHEETOF 9.000 1 OF SHEET 1 /1 1 /1 OF 1 1 .889 1.090 6.000 A A 3.175 .889 .500 Fax (919) Fax (919) 313-555 Fax313-5558 (919) 313-5558 TITLE TIGER 91919191 OUTLINE TIGER 9191 OUTLINE TIGER OUTLINE 1.090 8.839 00 Phone Phone (919) 313-5300 Phone (919) 313(919) 313-5300 .889 1.090 5 5 4600 Silicon Drive Drive 4600 Silicon Drive 4600 Silicon Durham, N.C 27703 Durham, N.C 277 Durham, N.C 27703 8.839 1.6 FINISH: 1.6 SURFACE SURFACE FINISH: 1.6 SURFACE FINISH: 6 6 DATE UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE UNLESS OTHERWISE SPECIFIED SPECIFIED 10/8/10 D. CRONIN 10/8/10 10/8/10 DIMENSIONS ARE IN DIMENSIONS ARE IND. CRONIN DIMENSIONS ARE IN D. CRONIN CHECK DATE CHECK MILLIMETERS AND AFTER FINISH. MILLIMETERS AND AFTER FINISH.DATECHECKDATE MILLIMETERS AND AFTER FINISH. 1.072 1.072 1.072 TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: .XX ± .XX .25 ± .XXAPPROVED ± .25 .25 APPROVED DATE APPROVED DATE DATE 1.905 1.905 1.905 TITLE .XXX ± .XXX .125 ± .XXX ± .125 TITLE .125 X° ± X°.5 ° ± ± .5 ° .5X°° 1.905 1.905 1.905 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION MATERIAL MATERIAL MATERIAL FOR SHEET METAL PARTS FOR ONLY SHEET METAL FOR SHEET METAL PARTS ONLYPARTS ONLY .X ± .X ± 1.5 .X 1.5 ± 1.5 SIZE SIZE .XX ± .XX .75 ± .XX ± .75 .75 RECOMMENDED STENCILSTENCIL PATTERN RECOMMENDED STENCIL PATTERN RECOMMENDED PATTERN .XXX ± .XXX .25 ± FINAL FINISH .XXX ±PROTECTIVE .25 FINAL PROTECTIVE FINISH .25 FINAL PROTECTIVE FINISH X° ± X°.5 ° ± ± .5 ° .5X°° B SOLDER ED PCRECOMMENDED BOARD PAD PC BOARD PAD ECOMMENDED PC BOARD SOLDERSOLDER PAD 6.000 50 4.85 ±.25 8.90 .650 8.839 8.839 8.839 .500 8.900 8.90 8.908.90 .500 .500 .500 6.000 6.000 INITIAL RELEASE 8.90 8.900 C DESCRIPTION A R4.100 R4.100 R4.100 C C REVISONS 9.113 8.900 2 REV 8.90 .500 D .950 .950 .950 3 ANODE MT-G 68.90 V 3/25/11 8.90 8.90 8.90 NOTICE E CONFIDENTIAL. THIS PLOT AND THE INFORMATION TAINED WITHIN ARE THE PROPRIETARY AND FIDENTIAL INFORMATION OF CREE, INC. THIS PLOT NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT CREE INC. 9.113 2/18/11 3 4.85 ±.25 4.85 ±.25 4.85 ±.25 8.90 6 10/8/10 1/11/11 All measurements are ±.25 mm unless otherwise indicated. .650 D BY DATE DATE APP'D DATE APP'D XLamp MT-G EasyWhite LED 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. 8.90 BY BY D Mechanical Dimensions 9.113 DESCRIPTIONDESCRIPTION DESCRIPTION DC INITIAL RELEASE DC 10/8/10 INITIAL RELEASE DC 10/8/10 INITIAL RELEASE DC B CHANGED SOLDER ® CHANGED SOLDER PAD VIEW PAD VIEW ® DC 1/11/11 DC 1/11/11 CHANGED SOLDER PAD VIEW DC C ADDEDVIEW STENCIL VIEW DC ADDED STENCIL 2/18/11 DC ADDED STENCIL VIEW 2/18/11 CHANGED OVERALL MATCHAND CUTWIDTH LENGTH AND WIDTH DIM TO MATCH DIM CUTTO LENGTH DC DCHANGED OVERALL DC 3/25/11 A A A 1 1 1 REVISONS REVISONS REVISONS REV REV REV 2 2 8.900 8.072 1.090 6.198 1.722 .937 3.175 3.175 .937 8.900 A 8.072 6.198 1.722 .950 .950 UNLESS OTHE DIMENSIO MILLIMETERS A TOLERANCE U .XX .XXX X° 1.072 1.905 3.175 .937 RECOMMENDED PC BOARD SOLDER PAD 1.905 UNLESS OTHERWISE SPECIFIED RECOMMENDED STENCIL PATTERN 1.072 .950 6 1.905 5 4 1.905 RECOMMENDED PC BOARD SOLDER PAD THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° DRAWN BY D. CRONIN FOR SHEET M .X .XX .XXX X° DATE 10/8/10 CHECK DATE APPROVED DATE SURFACE FIN 3 TITLE 36V MATERIAL SIZE FINAL PROTECTIVE FINISH SCALE Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite SURFACE are registered FINISH: 1.6trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 5 4 3 2 ® ® ® 16 C 9.000 DRAW XLamp ® MT-G EasyWhite ® LED 6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV Tape and Reel DESCRIPTION BY DATE A Initial Release DC 1/28/11 B Added missing sprocket holes DDS 10/17/11 APP'D All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. D All dimensions in mm. D 1.5± .1 User Feed Direction 4±.10 12±.1 END 1.75 ±.10 START CATHODE SIDE 5.25 16 +.3 -.0 C 9.4 C ANODE SIDE 6 6 Trailer NOTICE NOTICE 160mm (min) of CREE CONFIDENTIAL. CREE CONFIDENTIAL. THIS PLOT THIS AND PLOT THEAND INFORMATION THE INFORMATION emptyAND pockets CONTANED CONTANED WITHIN WITHIN ARE THEARE PROPRIETARY THE PROPRIETARY AND CONFIDENTIAL CONFIDENTIAL INFORMATION INFORMATION OF CREE, OFINC. CREE, THIS INC. PLOT THIS PLOT sealed with tape MAY NOT MAY BE NOT COPIED, BE COPIED, REPRODUCED REPRODUCED OR DISCLOSED OR DISCLOSED TO ANY TO ANY (15WRITTEN pockets min.) UNAUTHORIZED UNAUTHORIZED PERSONPERSON WITHOUT WITHOUT THE THE WRITTEN CONSENT CONSENT 5 5 4 4 3 Loaded Pockets (500 Lamps) 3 2 2 1 1 2400-00009 2400-00009 Leader 400mm (min) of1 empty pockets2 sealed with tape (35 pockets min.) INDEX OF CREE OF INC. CREE INC. QTYINDEX ITEM QTY 11 22 ITEM COMMENTS COMMENTS 2400-00009-CORE 1 2400-00009-CORE 2400-00009-REEL 2 2400-00009-REEL D D D C C B B 12.4 12.4 +.2 +.2 .0 .0 MEASURED AT HUBAT HUB MEASURED C UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° 16.4 16.4 THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY +0.2 +0.2 .X ± 1.5 .0 .0 .XX ± .75 .XXX .25 MEASURED AT HUB MEASURED AT±±HUB X° .5 ° A 330 +.25 -.75 330 +.25 -.75 DATE DRAWN BY D. CRONIN CHECK 5 4 Phone (919) 313-5300 -- APPROVED Fax (919) 313-5558 A DATE -- -- TITLE MTG LOADING SPEC MATERIAL -- 1.9±.4 1.9±.4 SIZE -- 3 SCALE REV. DRAWING NO. C FINAL PROTECTIVE FINISH SURFACE FINISH: 1.6 6 4600 Silicon Drive Durham, N.C 27703 1/28/11 DATE -- 2402-00016 B SHEET 3.000 2 OF 21 ±.41 / 121 ±.4 1 13.1 ±.2 13.1 ±.2 B B B 12.4 12.4 +1.0 +1.0 -.5 -.5 MEASURED MEASURED AT EDGE AT EDGE 60° 60° 60° 60° REVISONSREVISONS REV REV DRAWN BY DATE DRAWN BY DATE BY APP'D DATE APP'D DATE UNLESS OTHERWISE UNLESS OTHERWISE SPECIFIED SPECIFIED D. CRONIND. CRONIN 09/29/09 09/29/09 DIMENSIONS DIMENSIONS ARE IN INCHES ARE IN INCHES CHECK DATE DATE AND AFTERAND FINISH. AFTER FINISH.CHECK TOLERANCE TOLERANCE UNLESS SPECIFIED: UNLESS SPECIFIED: --- --.XX ± .XX .01 ± .01APPROVED APPROVED DATE DATE TITLE .XXX ± .XXX .005 ± .005 --- --X° ± X° .5 ° ± .5 ° THIRD ANGLE THIRD PROJECTION ANGLE PROJECTION MATERIAL FOR SHEETFOR METAL SHEET PARTS METAL ONLY PARTS ONLY MATERIAL .X ± .X.06 ± .06 SIZE ANTI-STATIC ANTI-STATIC HIPS HIPS .XX ± .XX .03 ± .03 .XXX ± .XXX .010 ± .010 FINAL PROTECTIVE FINAL FINISH PROTECTIVE FINISH X° ± X° .5 ° ± .5 ° A BY DESCRIPTION DESCRIPTION 4600 Silicon Drive 4600 Silicon Drive Durham, N.C 27703 Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558 A TITLE A REEL, REEL, 13" X 12MM, 13" X 12MM, 3 PIECE 3 PIECE SNAP SNAP SURFACE FINISH: SURFACE63 FINISH: 6 6 5 5 4 4 3 63 3 - - 2 2 C SCALE SIZE SCALE 0.500 REV. DRAWING NO.DRAWING NO. C 0.500 SHEET 1 OF SHEET ® A OF 1 /1 1 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ® REV. 2400-00009 2400-00009 A ® 17 1 /1 XLamp ® MT-G EasyWhite ® LED Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custom Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18