SMT Inductors, SIMID Series B82496-C SIMID 0603-C Size 0603 (EIA) and/or 1608 (IEC) Rated inductance 1,0 to 220 nH Rated current 0,11 to 1,8 A Construction ■ Copper-plated ceramic core ■ Laser-cut winding, epoxy-coated Features ■ ■ ■ ■ ■ ■ Extremely close tolerance of dimensions High resonance frequency Free of polarization effect Close inductance tolerance High mechanical stability Suitable for reflow (IR and vapor phase) and wave soldering Applications Resonant circuits, impedance matching for Mobile phones DECT systems Keyless entry GPS (Global Positioning System) Video cameras ■ ■ ■ ■ ■ Terminals ■ Electro-plated, 2 µm Ni, 10 µm Sn (lead-free) ■ Base material Al2O3 ceramic with Cu layer Marking No marking on component Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm cardboard tape, wound on 180-mm ∅ reel Bulk case on request For details on taping, packing and packing units refer to data book 2000 "Chokes and Inductors", page 151. 1 05/02 SMT Inductors, SIMID Series B82496-C SIMID 0603-C General technical data Rated inductance L R Measured with impedance analyzer HP 4291A and Agilent test fixture 16196 A at frequency fL Q factor Qmin, Qtyp Measured with impedance analyzer HP 4291A and Agilent test fixture 16196 A Qmin measured at frequency fQ Rated current IR Maximum permissible dc with a temperature increase of ≤ 15 K at rated temperature125 °C Self-resonance frequency fres, min Measured with network analyzer HP 8720 DC resistance R max Measured at 20 °C ambient temperature, measuring current < IR Climatic category 55/125/56 (– 55 °C/+ 125 °C/56 days damp heat test) in accordance with IEC 60068-1 Solderability (215 ± 3) °C, (3 ± 0,3) s wetting of soldering area: ≥ 95 % in accordance with IEC 60068-2-58 Resistance to soldering heat 260 °C, 10 s in accordance with IEC 60068-2-58 ∆L/L: ≤ ± 3 % Permissible PCB bending 2 mm (100 mm long standard PCB) Weight Approx. 4 mg 2 05/02 SMT Inductors, SIMID Series B82496-C SIMID 0603-C 0,8±0,1 Dimensional drawing 0,3±0,2 0,3±0,2 0,8±0,1 1,6±0,1 SSB1536-H Layout recommendation c Layoutempfehlung a b SSB1356-J Dimensions (mm) a b c 0,9 ± 0,1 2,3 ± 0,3 0,8 ± 0,1 3 05/02 SMT Inductors, SIMID Series B82496-C SIMID 0603-C Characteristics and ordering codes LR Tolerance Qmin nH 1,0 ± 0,3 nH ^ A f L; f Q Qtyp (at 800 MHz) MHz IR R max fres, min A Ω GHz Ordering code1)2) 7 60 100 1,8 0,02 16 B82496C3109+ 8 60 100 1,8 0,025 15 B82496C3129+ 50 100 1,5 0,03 13 B82496C3159+ 1,8 ± 0,2 nH 8 ^ Z 12 50 100 1,5 0,033 12 B82496C3189+ 2,2 14 50 100 1,5 0,035 10 B82496C3229+ 2,7 14 40 100 1,4 0,04 10 B82496C3279+ 3,3 14 40 100 1,2 0,06 9 B82496C3339+ 14 40 100 1,1 0,065 8 B82496C3399+ 14 40 100 0,8 0,10 7 B82496C3479+ ± 0,2 nH 14 ^ Z 14 40 100 0,7 0,15 6 B82496C3569+ 6,8 40 100 0,7 0,15 6 B82496C3689+ 8,2 14 40 100 0,65 0,18 6 B82496C3829+ 1,2 1,5 3,9 4,7 5,6 10 ±5% ^ J ±5% ^ J 14 40 100 0,6 0,20 5 B82496C3100+ 14 40 100 0,45 0,35 5 B82496C3120+ 14 40 100 0,42 0,40 4,5 B82496C3150+ 14 40 100 0,40 0,45 4,0 B82496C3180+ 22 14 40 100 0,38 0,50 4,0 B82496C3220+ 27 14 35 100 0,36 0,55 3,0 B82496C3270+ 33 14 35 100 0,35 0,60 3,0 B82496C3330+ 39 14 35 100 0,30 0,80 2,5 B82496C3390+ 47 14 35 100 0,27 0,95 2,5 B82496C3470+ 56 14 35 100 0,25 1,2 2,5 B82496C3560+ 68 14 35 100 0,23 1,3 2,0 B82496C3680+ 82 14 35 100 0,22 1,5 2,0 B82496C3820+ 100 14 30 100 0,20 1,8 1,8 B82496C3101+ 120 5 30 25,2 0,16 3,0 1,8 B82496C3121+ 150 5 30 25,2 0,13 5,0 1,6 B82496C3151+ 180 4 25 25,2 0,12 6,0 1,4 B82496C3181+ 220 4 25 25,2 0,11 7,0 1,3 B82496C3221+ 12 15 18 ±2% ^ G Special values available on request. 1) Replace the + by the code letter for the required inductance tolerance (see table). 2) Ordering code for cardboard tape/reel packing. For bulk case append code number »1«. Example: B82496C3109A1 4 05/02 SMT Inductors, SIMID Series B82496-C SIMID 0603-C Impedance |Z | versus frequency f measured with impedance analyzer HP 4291A/16196A Inductance L versus dc load current IDC measured with LCR meter HP 4275A SSB1998-W 10 5 _ | Z | 10 4 10 3 SSB1999-5 10 6 nH Ω 220 nH L 10 _7 100 nH _8 10 nH _9 1 nH 10 2 10 1 10 10 0 10 10 10 220 nH 100 nH 10 nH 1 nH _1 _2 10 _3 10 3 10 4 10 5 10 kHz 10 6 f Q 10 _2 10 _1 10 0 A 10 1 Ι DC Current derating Iop/IR versus ambient temperature TA Q factor versus frequency f measured with impedance analyzer HP 4291A/16196A SSB2000-Q 100 _10 SSB2001-Y 1,2 IΙopB 90 IΙRR 1 nH 80 70 1,0 0,8 60 10 nH 0,6 50 40 0,4 30 20 0,2 10 220 nH 0 4 10 10 5 10 6 100 nH 0 kHz 10 7 f 5 05/02 0 20 40 60 80 100 ˚C 140 TA SMT Inductors, SIMID Series B82496-C SIMID 0603-C Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 6 05/02