GPSEMI GPTP2220 Phase controlled scr Datasheet

Green Power Solutions srl
Via Greto di Cornigliano 6R - 16152 Genova , Italy
Phone: +39-010-659 1869
Fax: +39-010-659 1870
Web: www.gpsemi.it
E-mail: [email protected]
GPTP2220
PHASE CONTROLLED SCR
High reliability operation
DC power supply
AC drives
VOLTAGE UP TO
1600 V (*)
AVERAGE CURRENT
2200 A
SURGE CURRENT
BLOCKING CHARACTERISTICS
Characteristic
Conditions
32 kA
Value
VRRM
Repetitive peak reverse voltage
1600 V
VRSM
Non-repetitive peak reverse voltage
1700 V
VDRM
Repetitive peak off-state voltage
IDRM
IRRM
Repetitive peak off-state current, max.
Repetitive peak reverse current, max.
1800 V
VDRM, single phase, half wave, Tj = Tjmax
VRRM, single phase, half wave, Tj = Tjmax
75 mA
75 mA
ON-STATE CHARACTERISTICS
IT(AV)
Average on-state current
Sine wave,180° conduction, Th = 55 °C
2200 A
IT(RMS)
R.M.S. on-state current
3456 A
ITSM
Surge on-state current
Sine wave,180° conduction, Th = 55 °C
Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax
I²t
VT(TO)
I² t for fusing coordination
Threshold voltage
Tj = Tjmax
0,85 V
rT
On-state slope resistance
Tj = Tjmax
0,122 mΩ
VTM
Peak on-state voltage, max
IH
IL
Holding current, max
Latching current, typ
On-state current IT = 2000 A , Tj = 25 °C
Tj = 25 °C
Tj = 25 °C
32 kA
5120 kA²s
1,15 V
300 mA
700 mA
TRIGGERING CHARACTERISTICS
VGT
Gate trigger voltage
Tj = 25 °C, VD = 5 V
IGT
Gate trigger current
Tj = 25 °C, VD = 5 V
300 mA
VGD
Non-trigger voltage
VD = 67% VRRM, Tj = Tjmax
0,25 V
Pulse width 100 µs
150 W
2,5 V
PGM
Peak gate power dissipation
PG(AV)
Average gate power dissipation
IFGM
Peak gate current
10 A
VFGM
VRGM
Peak gate voltage (forward)
Peak gate voltage (reverse)
10 V
12 V
2 W
SWITCHING CHARACTERISTICS
di/dt
Critical rate of rise of on-state current
Tj = Tjmax
200 A/µs
dV/dt
tq
Critical rate of rise of off-state voltage
Tj = Tjmax
500 V/µs
Turn-off time, typ
Tj = Tjmax, IT = 1000 A, di/dt = -20 A/µs
µs
VR = 50 V, VD = 67% VDRM, dV/dt = 20 V/µs
THERMAL AND MECHANICAL CHARACTERISTICS
Rth(j-c)
Thermal resistance (junction to case)
Double side cooled
0,015 °C/W
Rth(c-h)
Thermal resistance (case to heatsink)
Double side cooled
0,006 °C/W
Tjmax
Max operating junction temperature
Tstg
Storage temperature
-40 / 125 °C
F
Clamping force ± 5%
Mass
23 kN
500 g
(*) 1800 V available upon request - Contact Factory
Document GPTP2220T002
125 °C
GPTP2220
PHASE CONTROLLED SCR
130
120
110
100
90
80
70
60
50
Power loss - sine wave
3500
180°
3000
90°
30°
2000
1500
1000
500
30°
0
400
800
60°
90°
1200
1600
120°
180°
2000
0
0
2400
400
800
Maximum surge current
d.s. cooled
1600
2000
2400
On-state voltage drop
35
25
5000
5000
4000
4000
20
3000
3000
[A]
ITIT[A]
30
ITSM [A]
1200
IT[A]
IT [A]
15
10
Tj=Tjmax
Tj=Tjmax
2000
2000
1000
1000
5
0
1
10
100
00
0
0,5
0,5
1
0,01
0,1
1
1,5
2
75
Thermal impedance (j-c)
0,016
0,014
0,012
0,01
0,008
0,006
0,004
0,002
0
0,001
1
1,5
VTT [V]
[V]
V
Number of cycle current pulses [n]
ZTH(j-c) [°C / W]
120°
60°
2500
PF [W]
Heatsink temperature [°C]
Current rating - sine wave
10
100
Time [s]
dimensions mm
In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet
without notice.
Document GPTP2220T002
Similar pages