ETC MI-AIM Military component front end module Datasheet

MI - AIM
TM
Military Component Front End Modules
Features
" MIL-STD-704A
input transient protection
" Inputs: 115Vac; 60/400Hz
" Output power: 250W
" Compatible with MI-x7x
family modules
" 95% efficiency
" MIL-STD-461D EMI compliance
" Size: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7mm)
" Operating temperature to 100°C
" MIL-STD-810 environments
Product Highlights
The MI-AIM AC input module
interfaces directly with AC mains
to provide line rectification, EMI
filtering, transient protection, and
inrush limiting. These military
front end modules accept 115Vac
and provide 250W of output power
for any of Vicor's MI-x7x family of
standard and junior size modules.
The MI-AIM meets CE102 conducted
emissions requirements of MILSTD-461D and the transient and
spike requirements of MIL-STD-704A.
Produced in ISO 9001-registered
facilities, the fully epoxy
encapsulated 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7mm) modules
meet the environmental test
requirements of MIL-STD-810.
Specifications
(At TBP = 25°C, unless otherwise specified)
PARAMETER
MIN
(f)
Inrush current
Conducted EMI
Efficiency
Spikes
UNITS
140
440
180
480
40
Vrms
Hz
Vrms
Vrms
Hz
A, peak
±50
%
%
NOTES
0.2 seconds
5 seconds
5 seconds
125Vac
100-125Vac; 60Hz
115Vac; 60/400Hz
Nominal line voltage, 50µs
Output Characteristics
Power
Short circuit protection
Ext. capacitance (C1)
Isolation
Input to output
Input to baseplate
Environmental (MIL-STD-810)
Altitude - method 500.2
Humidity - method 507.2
Acceleration - method 513.3
Vibration - method 514.3
Shock - method 516.3
Mechanical Characteristics
Thermal resistance
Weight
1 of 2
MAX
CE102 per MIL-STD-461D
95
250
W
no damage
1200
µF
none
1500
Vrms
40,000
86 / 240
9
20
40
feet
% / hours
g's
g's
g's
Reliability (MIL-HDBK-217F)
25°C Ground Benign: G.B.
50°C Naval Sheltered: N.S.
65°C Airborne Inhabited Cargo: A.I.C.
MI-AIM 04/03
TYP
Input Characteristics (per MIL-STD-704A)
Steady state input (V)
85
115
(f)
47
60/400
Transient input
(V)
80
100°C
100-125Vac
See connection diagram
Provided by converter
4,699,223
1,109,016
916,348
0.14
3 (85)
Procedure 3
Procedure 1, cycle 1
Procedure 2
Procedure 1, category 6
Procedure 1
hours
hours
hours
°C/W
Baseplate to sink, with thermal pad
ounces (grams)
Product Grade Specifications
PARAMETER
PRODUCT GRADE
I - Grade
Part Number
Storage temperature
Operating temperature (baseplate)
Power cycling burn-in
Temperature cycled with power off
17°C per minute rate of change
M- Grade
MI-AIM-I1
MI-AIM-M1
-55°C to +125°C
-65°C to +125°C
-40°C to +100°C
-55°C to +100°C
12 hours, 25 cycles
96 hours, 200 cycles
12 cycles
-65°C to +100°C
12 cycles
-65°C to +100°C
-40°C, +80°C
-55°C, +80°C
Test data supplied at these temperatures*
Warranty
Environmental compliance
2 years
2 years
MIL-STD-810
MIL-STD-810
*Test data available for review or download from vicorpower.com
Connection Diagram
0.01 µF (Two 4700 pF )
Y-Rated Capacitors
F1
Universal
AC In
0.01 µF Ceramic
F2
+Out
L1
N/C
Gate In
Gate In
0.47 µF
C out*
Parallel
N/C
Gate Out
+S
MI-27x/J7x
Driver
Load
Trim
-S
Gate Out
-In
-Out
L2/N
+Out
+In
-Out
0.01 µF Ceramic
MI-AIM
0.01 µF (Two 4700 pF )
Y-Rated Capacitors
* 1200µF Max. (See Vicor's Applications Manual, page 12-2, Selecting Capacitors for AIM Modules.)
Fuse 1: 7A F03A type recommended.
Fuse 2: For MI-x7x-xx – Buss PC-Tron 2.5A (450V)
Mechanical Drawing
2.28
(57,9)
0.49
(12,4)
0.30±.015
(7,6)±(0,38)
0.65
(16,5)
1.30
(33,0)
4
9
3
2.10
(53,4)
0.15
(3,8)
0.080 Dia (2) places
Solder plate
over copper alloy
8
MI-AIM
7
2
6
1
5
FULL R
0.15
(3,8)
1.40
1.00 (35,6)
0.70 (25,4)
0.40 (17,8)
(10,2)
0.35± 0.015
(8,9)±(0,38)
Pin #
1
2
3
4
5
6
7
8
9
0.040 (1,0) Dia (7) places
Solder plate
over copper alloy
2.40
(61,0)
Product ID
this surface
1.90
(48,3)
Function
L1
NC
NC
L2/N
+Out
Gate In
Parallel
Gate Out
–Out
0.30
(7,6) Min.
0.22
(5,6) Min.
0.50
(12,7)
1.75
(44,4) Max.
+0.030 (0,76)
-0.000 (0)
.01
0.12
(3,0)
Aluminum Base
MI-AIM 04/03
2 of 2
Similar pages