DCDC 1 Watt xppower.com IC Series • Single Output • Ultra Slim DIP Package • Industry Standard Pinout • 1500 VDC Isolation Standard • MTBF >3.5 MHrs • 40 °C to +85 °C Operation • 3 Year Warranty Specification Input Input Voltage Range Input Reverse Voltage Protection • Nominal ±10% • None Output Voltage Output Current Efficiency (typ) Model Number 5.0 V 200 mA 74% IC0505DA(1) 5 VDC 12.0 V 83 mA 77% IC0512DA 15.0 V 67 mA 76% IC0515DA 5.0 V 200 mA 73% IC1205DA 12 VDC Output Output Voltage Minimum Load Line Regulation Load Regulation Input Voltage • • • • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • See table 10% 1.2%/1% ∆ Vin 10% to 100% load change, 5 Vout: 12.8% typ, 15% max, 12 Vout: 6.8% typ, 15% max, 15 Vout: 6.8% typ, 15% max 100-110% of nominal at 10% load 75 mV pk-pk 20 MHz bandwidth 0.03%/°C Continuous, auto recovery Notes 1. IC0505DA available with 3000 VDC isolation, add suffix ‘-H’ to part number. Mechanical Details Side View 0.14 (3.7) 0.02 (0.5) 0.02 (0.5) General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF • See table • 1500 VDC minimum, 3000 VDC optional(1), tested for 1 minute • 109 Ω • 25 pF typical • 100 kHz typical at nominal input, full load • >3.5 MHrs to MIL-HDBK-217F at 25 °C, GB 0.30 (7.6) 0.17 (4.5) 14 0.260 (6.60) 8 Top View 1 2 0.01 (0.2) 0.03 (1.0) 5 6 0.300 (7.62) 7 0.100 (2.54) 0.600 (15.24) 0.768 (19.50) Recommended footprint Top view grid: 0.1 x 0.1 in (2.54 x 2.54 mm) Environmental Operating Temperature Storage Temperature Case Temperature Cooling Lead Temperature • • • • • -40 °C to +85 °C -55 °C to +125 °C 105 °C max Convection-cooled 250 °C, 0.06 in (1.5 mm) from case, 10 s ø 0.03 (ø 1.0) 14 1 8 2 5 6 0.10 (2.5) 7 0.10 (2.5) Pin 1 2 5 6 7 8 14 Function Vin GND 0V +Vout N.C. N.C. N.C. N.C. Not connected Notes 1. All dimensions in inches (mm) 2. Tolerance: ±0.010 (±0.25) 3. Weight: 0.003 lbs (1.4 g) 4. Pin tolerance: ±0.004 (±0.10 mm) 21-Jan-11