1000BASE-T SINGLE PORT RJ-45 JACK WITH MAGNETIC MODULE Industries N5607 • Designed for network interface card application • For Gigabit Transmission over CAT 5 & 6 UTP cable • Designed to meet IEEE802.3 requirement • Operating temperature: 0°C to +70°C • RoHS compliant product • Custom design available ELECTRICAL PARAMETERS @25°C Part Turns Insertion Number Ratio Loss ±2% (dB Max) N5607 • • 1CT:1CT Return Loss (dB) Min MHz Cross Talk (dB) Typ MHz CMR (dB) Typ MHz 1-100MHz 1-40 60 80 100 1-100 0.1-30 30-60 60-100 -1.1 -18 -14 -12 -10 -35 -38 -35 -30 Inductance: 350µH Min @ 100KHz, 0.1VRMS with 8mA DC Hipot: 1500VRMS DIMENSIONS SCHEMATIC Ω Ω Ω Ω RECOMMENDED PCB LAND PATTERN Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]