UPS EP 1000 APPLICATION Home, Office, Internet Bar FEATURES Excellent microprocessor control guarantees high reliability Boost and buck AVR for voltage stabilization Auto restart while AC is recovering Simulated sine wave Off-mode charging C old start function USB/RS-232 communication port and RJ-11 protection PHASE (ONLY FOR ONLINE UPS) Phase: Voltage Range: Frequency Range: Full Protection: 1000 VA / 600 W 110/120 VAC or 220/230/240 VAC 81-145 VAC / 162-290 VAC 60/50 Hz (auto sensing) Output Receptacles: India, French, Schuko, NEMA, and IEC ions 350mm(L) x 146mm(W) x 160mm(H) 8 Dimension: Net Weight (kgs): OPERATING ENVIRONMENT Humidity: ±10% Noise Level: 60 Hz or 50 Hz ±1 Hz Typical 2 ~ 6 ms, MANAGEMENT Simulated Sine Wave Optional USB/RS-232 Port: BATTERY Battery Type: Battery Number: Typical Recharge Time: Overload, Discharge, and Overcharge Protection PHYSICAL OUTPUT AC Voltage Regulation (Batt. Mode) : Frequency Range (Batt. Mode): Transfer Time: Waveform (Batt. Mode): PROTECTION 1-phase in / 1-phase out INPUT Capacity: Voltage: SAFETY STANDARD APPAOVAL 12 V/7 Ah 2 4-6 hours up to 90% capacity This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice 0-90 % RH @ 0- 40°C (non-condensing) Less than 40dB Support Windows 98/2000/2003/XP/Vista/2008, Windows 7, Linux, and MAC 8