TDK MLG0603P43NJT000 Inductors for high frequency circuits multilayer ceramic Datasheet

I
N
D
U
C
T
O
R
S
February 2015
Inductors for High Frequency Circuits
Multilayer Ceramic
MLG-P Series
MLG0603P Type
MLG0603P
0603 [0201 inch]*
* Dimensions Code JIS[EIA]
(2/17)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(3/17)
I
N
D
U
C
T
O
R
S
Inductors for High Frequency Circuits
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Multilayer Ceramic
Overview of MLG0603P Type
FEATURES
High Q type inductor for high-frequency circuits.
Inductance range: from 0.6 to 120nH.
0.1n step inductance lineup.
Compared with existing products, the size was greatly reduced, making it optimal for fine-pitch circuits.
Optimal configuration that greatly improves the Q to 800MHz or higher.
Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MLG
Series name
0603
L×W×H Dimensions
(mm)
0603
0.6×0.3×0.3
P
Characteristics
P
0N6
B
Inductance
(nH)
1N1
1.1
11N
11
Inductance
tolerance
B
±0.1nH
C
±0.2nH
S
±0.3nH
H
±3%
J
±5%
T
000
Packaging style
Internal code
T
Taping
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Operating
Storage
Type
temperature
temperature
(pieces/reel)
（°C）
（°C）
MLG0603P
–55 to +125
–55 to +125
15000
The Storage temperature range is for after the circuit board is mounted.
Individual weight
（mg）
0.2
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(4/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(5/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
0.30±0.03
SHAPE & DIMENSIONS
0.09±0.04
0.09±0.04
0.30±0.03
0.60±0.03
0.15±0.05
0.15±0.05
Dimensions in mm
0.3
RECOMMENDED LAND PATTERN
0.25
0.3
0.25
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(6/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
Tolerance
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
—
—
—
—
—
—
—
—
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.0
9.0
9.0
9.0
9.0
9.0
8.5
8.5
8.5
8.0
8.0
8.0
(: )max.
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
(mA)max.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
800
800
800
800
800
800
800
800
800
800
800
800
700
700
700
700
700
700
700
700
700
600
600
600
600
600
600
600
600
600
MLG0603P0N6BT000
MLG0603P0N6CT000
MLG0603P0N7BT000
MLG0603P0N7CT000
MLG0603P0N8BT000
MLG0603P0N8CT000
MLG0603P0N9BT000
MLG0603P0N9CT000
MLG0603P1N0ST000
MLG0603P1N0BT000
MLG0603P1N0CT000
MLG0603P1N1ST000
MLG0603P1N1BT000
MLG0603P1N1CT000
MLG0603P1N2ST000
MLG0603P1N2BT000
MLG0603P1N2CT000
MLG0603P1N3ST000
MLG0603P1N3BT000
MLG0603P1N3CT000
MLG0603P1N4ST000
MLG0603P1N4BT000
MLG0603P1N4CT000
MLG0603P1N5ST000
MLG0603P1N5BT000
MLG0603P1N5CT000
MLG0603P1N6ST000
MLG0603P1N6BT000
MLG0603P1N6CT000
MLG0603P1N7ST000
MLG0603P1N7BT000
MLG0603P1N7CT000
MLG0603P1N8ST000
MLG0603P1N8BT000
MLG0603P1N8CT000
MLG0603P1N9ST000
MLG0603P1N9BT000
MLG0603P1N9CT000
MLG0603P2N0ST000
MLG0603P2N0BT000
MLG0603P2N0CT000
MLG0603P2N1ST000
MLG0603P2N1BT000
MLG0603P2N1CT000
(GHz)typ.
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
19.9
19.9
19.9
16.0
16.0
16.0
13.9
13.9
13.9
11.7
11.7
11.7
14.9
14.9
14.9
13.4
13.4
13.4
12.8
12.8
12.8
10.7
10.7
10.7
10.9
10.9
10.9
10.1
10.1
10.1
9.8
9.8
9.8
(: )typ.
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.03
0.03
0.03
0.04
0.04
0.04
0.03
0.03
0.03
0.03
0.03
0.03
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.03
0.03
0.03
0.05
0.05
0.05
Please contact us for information on inductance tolerance, G (±2%).
・Short bar residual inductance =0.43nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(7/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
Tolerance
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.0
7.0
7.0
6.5
6.5
6.5
6.5
6.5
6.5
(: )max.
0.10
0.10
0.10
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
(mA)max.
600
600
600
600
600
600
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
400
400
400
MLG0603P2N2ST000
MLG0603P2N2BT000
MLG0603P2N2CT000
MLG0603P2N3ST000
MLG0603P2N3BT000
MLG0603P2N3CT000
MLG0603P2N4ST000
MLG0603P2N4BT000
MLG0603P2N4CT000
MLG0603P2N5ST000
MLG0603P2N5BT000
MLG0603P2N5CT000
MLG0603P2N6ST000
MLG0603P2N6BT000
MLG0603P2N6CT000
MLG0603P2N7ST000
MLG0603P2N7BT000
MLG0603P2N7CT000
MLG0603P2N8ST000
MLG0603P2N8BT000
MLG0603P2N8CT000
MLG0603P2N9ST000
MLG0603P2N9BT000
MLG0603P2N9CT000
MLG0603P3N0ST000
MLG0603P3N0BT000
MLG0603P3N0CT000
MLG0603P3N1ST000
MLG0603P3N1BT000
MLG0603P3N1CT000
MLG0603P3N2ST000
MLG0603P3N2BT000
MLG0603P3N2CT000
MLG0603P3N3ST000
MLG0603P3N3BT000
MLG0603P3N3CT000
MLG0603P3N4ST000
MLG0603P3N4BT000
MLG0603P3N4CT000
MLG0603P3N5ST000
MLG0603P3N5BT000
MLG0603P3N5CT000
MLG0603P3N6ST000
MLG0603P3N6BT000
MLG0603P3N6CT000
(GHz)typ.
9.0
9.0
9.0
8.4
8.4
8.4
10.9
10.9
10.9
9.9
9.9
9.9
10.1
10.1
10.1
10.0
10.0
10.0
9.9
9.9
9.9
9.2
9.2
9.2
9.1
9.1
9.1
8.8
8.8
8.8
8.4
8.4
8.4
8.4
8.4
8.4
8.1
8.1
8.1
8.0
8.0
8.0
7.7
7.7
7.7
(: )typ.
0.07
0.07
0.07
0.07
0.07
0.07
0.12
0.12
0.12
0.09
0.09
0.09
0.14
0.14
0.14
0.14
0.14
0.14
0.10
0.10
0.10
0.10
0.10
0.10
0.14
0.14
0.14
0.10
0.10
0.10
0.14
0.14
0.14
0.13
0.13
0.13
0.13
0.13
0.13
0.12
0.12
0.12
0.10
0.10
0.10
Please contact us for information on inductance tolerance, G (±2%).
・Short bar residual inductance =0.43nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(8/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10.0
10.0
11.0
11.0
Tolerance
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±3%
±5%
±0.3nH
±3%
±5%
±0.3nH
±3%
±5%
±0.3nH
±3%
±5%
±0.3nH
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
6.5
6.5
6.5
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.5
5.5
5.5
5.5
5.5
5.5
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
3.5
3.5
(: )max.
0.20
0.20
0.20
0.30
0.30
0.30
0.30
0.30
0.30
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.70
0.70
0.70
0.75
0.75
0.80
0.80
0.85
0.85
0.90
0.90
0.95
0.95
1.00
1.00
(mA)max.
400
400
400
400
400
400
400
400
400
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
300
300
300
300
300
300
300
250
250
250
250
250
250
250
250
MLG0603P3N7ST000
MLG0603P3N7BT000
MLG0603P3N7CT000
MLG0603P3N8ST000
MLG0603P3N8BT000
MLG0603P3N8CT000
MLG0603P3N9ST000
MLG0603P3N9BT000
MLG0603P3N9CT000
MLG0603P4N0ST000
MLG0603P4N0BT000
MLG0603P4N0CT000
MLG0603P4N1ST000
MLG0603P4N1BT000
MLG0603P4N1CT000
MLG0603P4N2ST000
MLG0603P4N2BT000
MLG0603P4N2CT000
MLG0603P4N3ST000
MLG0603P4N3HT000
MLG0603P4N3JT000
MLG0603P4N7ST000
MLG0603P4N7HT000
MLG0603P4N7JT000
MLG0603P5N1ST000
MLG0603P5N1HT000
MLG0603P5N1JT000
MLG0603P5N6ST000
MLG0603P5N6HT000
MLG0603P5N6JT000
MLG0603P6N2ST000
MLG0603P6N2HT000
MLG0603P6N2JT000
MLG0603P6N8HT000
MLG0603P6N8JT000
MLG0603P7N5HT000
MLG0603P7N5JT000
MLG0603P8N2HT000
MLG0603P8N2JT000
MLG0603P9N1HT000
MLG0603P9N1JT000
MLG0603P10NHT000
MLG0603P10NJT000
MLG0603P11NHT000
MLG0603P11NJT000
(GHz)typ.
7.4
7.4
7.4
7.0
7.0
7.0
7.1
7.1
7.1
6.7
6.7
6.7
6.7
6.7
6.7
6.6
6.6
6.6
6.7
6.7
6.7
6.9
6.9
6.9
6.6
6.6
6.6
5.3
5.3
5.3
6.3
6.3
6.3
6.1
6.1
5.4
5.4
5.2
5.2
5.0
5.0
4.7
4.7
4.5
4.5
(: )typ.
0.14
0.14
0.14
0.24
0.24
0.24
0.22
0.22
0.22
0.21
0.21
0.21
0.29
0.29
0.29
0.24
0.24
0.24
0.24
0.24
0.24
0.16
0.16
0.16
0.30
0.30
0.30
0.32
0.32
0.32
0.59
0.59
0.59
0.62
0.62
0.70
0.70
0.71
0.71
0.76
0.76
0.85
0.85
0.64
0.64
Please contact us for information on inductance tolerance, G (±2%).
・Short bar residual inductance =0.43nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(9/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
12.0
12.0
13.0
13.0
15.0
15.0
16.0
16.0
18.0
18.0
20.0
20.0
22.0
22.0
24.0
24.0
27.0
27.0
30.0
30.0
33.0
33.0
36.0
36.0
39.0
39.0
43.0
43.0
47.0
47.0
51.0
51.0
56.0
56.0
62.0
62.0
68.0
68.0
75.0
75.0
82.0
82.0
91.0
91.0
Tolerance
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
9
9
9
9
9
9
9
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
(GHz)min.
3.5
3.5
3.2
3.2
3.2
3.2
3.0
3.0
3.0
3.0
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.6
1.6
1.6
1.6
1.4
1.4
1.4
1.4
1.2
1.2
1.2
1.2
1.0
1.0
1.0
1.0
0.9
0.9
(: )max.
1.10
1.10
1.10
1.10
1.20
1.20
1.20
1.20
1.40
1.40
1.90
1.90
1.90
1.90
2.10
2.10
2.10
2.10
2.20
2.20
2.20
2.20
2.40
2.40
2.40
2.40
2.90
2.90
2.90
2.90
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
4.00
4.00
4.00
4.00
4.50
4.50
(mA)max.
250
250
250
250
250
250
200
200
200
200
150
150
150
150
140
140
140
140
130
130
130
130
120
120
120
120
110
110
110
110
100
100
100
100
100
100
100
100
80
80
80
80
80
80
MLG0603P12NHT000
MLG0603P12NJT000
MLG0603P13NHT000
MLG0603P13NJT000
MLG0603P15NHT000
MLG0603P15NJT000
MLG0603P16NHT000
MLG0603P16NJT000
MLG0603P18NHT000
MLG0603P18NJT000
MLG0603P20NHT000
MLG0603P20NJT000
MLG0603P22NHT000
MLG0603P22NJT000
MLG0603P24NHT000
MLG0603P24NJT000
MLG0603P27NHT000
MLG0603P27NJT000
MLG0603P30NHT000
MLG0603P30NJT000
MLG0603P33NHT000
MLG0603P33NJT000
MLG0603P36NHT000
MLG0603P36NJT000
MLG0603P39NHT000
MLG0603P39NJT000
MLG0603P43NHT000
MLG0603P43NJT000
MLG0603P47NHT000
MLG0603P47NJT000
MLG0603P51NHT000
MLG0603P51NJT000
MLG0603P56NHT000
MLG0603P56NJT000
MLG0603P62NHT000
MLG0603P62NJT000
MLG0603P68NHT000
MLG0603P68NJT000
MLG0603P75NHT000
MLG0603P75NJT000
MLG0603P82NHT000
MLG0603P82NJT000
MLG0603P91NHT000
MLG0603P91NJT000
(GHz)typ.
4.3
4.3
4.2
4.2
3.7
3.7
3.6
3.6
3.5
3.5
3.3
3.3
2.9
2.9
2.9
2.9
2.7
2.7
2.3
2.3
2.4
2.4
2.2
2.2
2.2
2.2
2.0
2.0
2.0
2.0
1.9
1.9
1.8
1.8
1.6
1.6
1.6
1.6
1.5
1.5
1.5
1.5
1.3
1.3
(: )typ.
0.82
0.82
0.87
0.87
0.94
0.94
1.00
1.00
1.04
1.04
1.33
1.33
1.31
1.31
1.17
1.17
1.45
1.45
1.37
1.37
1.55
1.55
1.49
1.49
1.72
1.72
1.61
1.61
2.18
2.18
1.87
1.87
2.35
2.35
2.12
2.12
2.69
2.69
2.59
2.59
2.71
2.71
2.92
2.92
Please contact us for information on inductance tolerance, G (±2%).
・Short bar residual inductance =0.43nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(10/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
100.0
100.0
110.0
110.0
120.0
120.0
Tolerance
±3%
±5%
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
9
9
9
9
9
9
(MHz)
300
300
300
300
300
300
(GHz)min.
0.9
0.9
0.8
0.8
0.8
0.8
(: )max.
4.50
4.50
5.00
5.00
5.00
5.00
(mA)max.
80
80
80
80
80
80
MLG0603PR10HT000
MLG0603PR10JT000
MLG0603PR11HT000
MLG0603PR11JT000
MLG0603PR12HT000
MLG0603PR12JT000
(GHz)typ.
1.3
1.3
1.1
1.1
1.0
1.0
(: )typ.
3.20
3.20
3.50
3.50
3.79
3.79
Please contact us for information on inductance tolerance, G (±2%).
・Short bar residual inductance =0.43nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(11/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
Please
Q typ.
800MHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2
2
2
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
1.8GHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
2.0GHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.4
2.4
2.4
2.4GHz
0.6
0.6
0.7
0.7
0.4
0.4
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.3
2.3
2.3
2.4
2.4
2.4
500MHz
16min.
16min.
16min.
16min.
16
16
17
17
16
16
16
17
17
17
18
18
18
17
17
17
18
18
18
17
17
17
17
17
17
17
17
17
17
17
17
18
18
18
19
19
19
18
18
18
18
18
18
18
18
18
Part No.
800MHz
22min.
22min.
22min.
22min.
22
22
22
22
21
21
21
23
23
23
24
24
24
22
22
22
23
23
23
22
22
22
22
22
22
22
22
22
22
22
22
24
24
24
23
23
23
23
23
23
23
23
23
22
22
22
1.8GHz
35min.
35min.
35min.
35min.
35
35
35
35
33
33
33
36
36
36
38
38
38
34
34
34
36
36
36
33
33
33
33
33
33
33
33
33
34
34
34
36
36
36
35
35
35
34
34
34
35
35
35
33
33
33
2.0GHz
37min.
37min.
37min.
37min.
37
37
37
37
36
36
36
38
38
38
40
40
40
36
36
36
39
39
39
35
35
35
35
35
35
35
35
35
35
35
35
38
38
38
37
37
37
36
36
36
36
36
36
35
35
35
2.4GHz
41min.
41min.
41min.
41min.
41
41
41
41
40
40
40
43
43
43
45
45
45
40
40
40
43
43
43
39
39
39
38
38
38
39
39
39
39
39
39
42
42
42
41
41
41
39
39
39
40
40
40
38
38
38
MLG0603P0N6BT000
MLG0603P0N6CT000
MLG0603P0N7BT000
MLG0603P0N7CT000
MLG0603P0N8BT000
MLG0603P0N8CT000
MLG0603P0N9BT000
MLG0603P0N9CT000
MLG0603P1N0BT000
MLG0603P1N0CT000
MLG0603P1N0ST000
MLG0603P1N1BT000
MLG0603P1N1CT000
MLG0603P1N1ST000
MLG0603P1N2BT000
MLG0603P1N2CT000
MLG0603P1N2ST000
MLG0603P1N3BT000
MLG0603P1N3CT000
MLG0603P1N3ST000
MLG0603P1N4BT000
MLG0603P1N4CT000
MLG0603P1N4ST000
MLG0603P1N5BT000
MLG0603P1N5CT000
MLG0603P1N5ST000
MLG0603P1N6BT000
MLG0603P1N6CT000
MLG0603P1N6ST000
MLG0603P1N7BT000
MLG0603P1N7CT000
MLG0603P1N7ST000
MLG0603P1N8BT000
MLG0603P1N8CT000
MLG0603P1N8ST000
MLG0603P1N9BT000
MLG0603P1N9CT000
MLG0603P1N9ST000
MLG0603P2N0BT000
MLG0603P2N0CT000
MLG0603P2N0ST000
MLG0603P2N1BT000
MLG0603P2N1CT000
MLG0603P2N1ST000
MLG0603P2N2BT000
MLG0603P2N2CT000
MLG0603P2N2ST000
MLG0603P2N3BT000
MLG0603P2N3CT000
MLG0603P2N3ST000
contact us for information on inductance tolerance, G (±2%).
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(12/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
Please
Q typ.
800MHz
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3
3
3
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
1.8GHz
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
2.0GHz
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
2.4GHz
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.4
4.4
4.4
500MHz
16
16
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
18
18
18
18
18
18.0
18.0
17.0
17.0
17.0
17.0
17.0
17.0
18.0
18.0
18.0
Part No.
800MHz
21
21
22
22
22
22
22
22
21
21
21
22
22
22
22
22
22
21
21
21
22
22
22
22
22
22
22
22
22
23
23
23
23
23
23
22
22
22
23
23
23
22
22
22
22
22
22
22
22
22
1.8GHz
31
31
33
33
33
33
33
33
33
33
33
34
34
34
34
34
34
32
32
32
33
33
33
34
34
34
33
33
33
34
34
34
34
34
34
33
33
33
34
34
34
32
32
32
32
32
32
32
32
32
2.0GHz
33
33
34
34
34
35
35
35
35
35
35
36
36
36
35
35
35
34
34
34
34
34
34
35
35
35
35
35
35
35
35
35
35
35
35
34
34
34
35
35
35
33
33
33
34
34
34
33
33
33
2.4GHz
36
36
38
38
38
38
38
38
38
38
38
40
40
40
39
39
39
37
37
37
37
37
37
38
38
38
38
38
38
38
38
38
38
38
38
37
37
37
37
37
37
36
36
36
36
36
36
36
36
36
MLG0603P2N4BT000
MLG0603P2N4ST000
MLG0603P2N5BT000
MLG0603P2N5CT000
MLG0603P2N5ST000
MLG0603P2N6BT000
MLG0603P2N6CT000
MLG0603P2N6ST000
MLG0603P2N7BT000
MLG0603P2N7CT000
MLG0603P2N7ST000
MLG0603P2N8BT000
MLG0603P2N8CT000
MLG0603P2N8ST000
MLG0603P2N9BT000
MLG0603P2N9CT000
MLG0603P2N9ST000
MLG0603P3N0BT000
MLG0603P3N0CT000
MLG0603P3N0ST000
MLG0603P3N1BT000
MLG0603P3N1CT000
MLG0603P3N1ST000
MLG0603P3N2BT000
MLG0603P3N2CT000
MLG0603P3N2ST000
MLG0603P3N3BT000
MLG0603P3N3CT000
MLG0603P3N3ST000
MLG0603P3N4BT000
MLG0603P3N4CT000
MLG0603P3N4ST000
MLG0603P3N5BT000
MLG0603P3N5CT000
MLG0603P3N5ST000
MLG0603P3N6BT000
MLG0603P3N6CT000
MLG0603P3N6ST000
MLG0603P3N7BT000
MLG0603P3N7CT000
MLG0603P3N7ST000
MLG0603P3N8BT000
MLG0603P3N8CT000
MLG0603P3N8ST000
MLG0603P3N9BT000
MLG0603P3N9CT000
MLG0603P3N9ST000
MLG0603P4N0BT000
MLG0603P4N0CT000
MLG0603P4N0ST000
contact us for information on inductance tolerance, G (±2%).
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(13/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10
10
11
11
12
12
13
13
15
15
16
16
18
18
20
20
22
22
24
24
27
27
Please
Q typ.
800MHz
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10
10
11
11
12
12
13
13
15
15
16
16
18
18
21
21
23
23
25
25
28
28
1.8GHz
4.3
4.3
4.3
4.4
4.4
4.4
4.5
4.5
4.5
4.9
4.9
4.9
5.3
5.3
5.3
6.1
6.1
6.1
6.5
6.5
6.5
7.3
7.3
8.1
8.1
9.0
9.0
10.0
10.0
11
11
13
13
14
14
15
15
18
18
20
20
23
23
27
27
34
34
36
36
45
45
2.0GHz
4.3
4.3
4.3
4.5
4.5
4.5
4.5
4.5
4.5
5.0
5.0
5.0
5.4
5.4
5.4
6.2
6.2
6.2
6.7
6.7
6.7
7.5
7.5
8.3
8.3
9.3
9.3
10.3
10.3
12
12
13
13
15
15
16
16
20
20
22
22
26
26
31
31
40
40
43
43
57
57
2.4GHz
4.5
4.5
4.5
4.6
4.6
4.6
4.7
4.7
4.7
5.1
5.1
5.1
5.7
5.7
5.7
6.6
6.6
6.6
7.0
7.0
7.0
8.0
8.0
8.8
8.8
10.0
10.0
11.1
11.1
13
13
15
15
17
17
19
19
24
24
27
27
33
33
42
42
68
68
72
72
500MHz
18.0
18.0
18.0
18.0
18.0
18
17
17
17
16
16
16
16
16
16
18
18
18
16
16
16
16
16
16
16
17
17
17
17
16
16
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
19
19
18
18
Part No.
800MHz
22
22
22
22
22
22
21
21
21
21
21
21
21
21
21
22
22
22
21
21
21
21
21
21
21
21
21
21
21
21
21
23
23
22
22
22
22
22
22
22
22
22
22
22
22
21
21
22
22
21
21
1.8GHz
33
33
33
32
32
32
32
32
32
31
31
31
31
31
31
31
31
31
30
30
30
29
29
30
30
30
30
30
30
28
28
30
30
28
28
28
28
27
27
26
26
25
25
23
23
21
21
21
21
18
18
2.0GHz
34
34
34
33
33
33
33
33
33
32
32
32
32
32
32
32
32
32
31
31
31
30
30
30
30
30
30
31
31
28
28
30
30
28
28
28
28
26
26
25
25
24
24
22
22
18
18
18
18
15
15
2.4GHz
36
36
36
35
35
35
35
35
35
34
34
34
34
34
34
32
32
32
33
33
33
31
31
32
32
31
31
32
32
28
28
30
30
27
27
26
26
24
24
22
22
20
20
17
17
11
11
11
11
MLG0603P4N1BT000
MLG0603P4N1CT000
MLG0603P4N1ST000
MLG0603P4N2BT000
MLG0603P4N2CT000
MLG0603P4N2ST000
MLG0603P4N3ST000
MLG0603P4N3HT000
MLG0603P4N3JT000
MLG0603P4N7ST000
MLG0603P4N7HT000
MLG0603P4N7JT000
MLG0603P5N1ST000
MLG0603P5N1HT000
MLG0603P5N1JT000
MLG0603P5N6ST000
MLG0603P5N6HT000
MLG0603P5N6JT000
MLG0603P6N2ST000
MLG0603P6N2HT000
MLG0603P6N2JT000
MLG0603P6N8HT000
MLG0603P6N8JT000
MLG0603P7N5HT000
MLG0603P7N5JT000
MLG0603P8N2HT000
MLG0603P8N2JT000
MLG0603P9N1HT000
MLG0603P9N1JT000
MLG0603P10NHT000
MLG0603P10NJT000
MLG0603P11NHT000
MLG0603P11NJT000
MLG0603P12NHT000
MLG0603P12NJT000
MLG0603P13NHT000
MLG0603P13NJT000
MLG0603P15NHT000
MLG0603P15NJT000
MLG0603P16NHT000
MLG0603P16NJT000
MLG0603P18NHT000
MLG0603P18NJT000
MLG0603P20NHT000
MLG0603P20NJT000
MLG0603P22NHT000
MLG0603P22NJT000
MLG0603P24NHT000
MLG0603P24NJT000
MLG0603P27NHT000
MLG0603P27NJT000
contact us for information on inductance tolerance, G (±2%).
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(14/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
30
30
33
33
37
37
40
40
44
44
48
48
53
53
58
58
65
65
71
71
79
79
87
87
99
99
110
110
126
126
151
151
Please
Q typ.
800MHz
32
32
36
36
39
39
43
43
48
48
53
53
59
59
66
66
76
76
82
82
97
97
109
109
132
132
152
152
211
211
1.8GHz
59
59
68
68
2.0GHz
2.4GHz
500MHz
18
18
15
15
16
16
15
15
15
15
15
15
15
15
15
15
15
15
15
15
14
14
14
14
13
13
14
14
13
13
12
12
Part No.
800MHz
21
21
17
17
17
17
17
17
16
16
16
16
16
16
15
15
15
15
15
15
13
13
13
13
12
12
12
12
9
9
1.8GHz
15
15
11
11
2.0GHz
2.4GHz
MLG0603P30NHT000
MLG0603P30NJT000
MLG0603P33NHT000
MLG0603P33NJT000
MLG0603P36NHT000
MLG0603P36NJT000
MLG0603P39NHT000
MLG0603P39NJT000
MLG0603P43NHT000
MLG0603P43NJT000
MLG0603P47NHT000
MLG0603P47NJT000
MLG0603P51NHT000
MLG0603P51NJT000
MLG0603P56NHT000
MLG0603P56NJT000
MLG0603P62NHT000
MLG0603P62NJT000
MLG0603P68NHT000
MLG0603P68NJT000
MLG0603P75NHT000
MLG0603P75NJT000
MLG0603P82NHT000
MLG0603P82NJT000
MLG0603P91NHT000
MLG0603P91NJT000
MLG0603PR10HT000
MLG0603PR10JT000
MLG0603PR11HT000
MLG0603PR11JT000
MLG0603PR12HT000
MLG0603PR12JT000
contact us for information on inductance tolerance, G (±2%).
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(15/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
R10
R12
82N 68N
56N
47N39N
33N 27N
22N
100
18N
15N
Inductance(nH)
12N
10N
8N2
10
6N8
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1
1N0
0
10
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(16/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
50
1N2
1N0
1N5
1N8
2N7
3N3
40
2N2
3N9
4N7
5N6
30
6N8
Q
8N2
10N
12N
20
15N
18N
10
56N
82N
47N
39N
68N
33N
22N
R12
0
10
R10
27N
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A+16197A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm
(17/17)
I
N
D
U
C
T
O
R
S
MLG0603P Type
PACKAGING STYLE
REEL DIMENSIONS
ø60min.
1.0
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
ø21±0.8
ø180±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
Type
MLG0603P
A
0.68±0.05
B
0.38±0.05
K
0.5 max.
A
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
K
B
4.0±0.1
2.0±0.05
160min.
Drawing direction
Taping
2.0±0.05
200min.
300min.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0603p_en.fm