Fairchild HCPL0534 High speed transistor optocoupler Datasheet

HCPL0452, HCPL0453, HCPL0500, HCPL0501,
HCPL0530, HCPL0531, HCPL0534
High Speed Transistor Optocouplers
Single Channel: HCPL0452 HCPL0453 HCPL0500 HCPL0501
Dual Channel: HCPL0530 HCPL0531 HCPL0534
Features
Description
■ High speed – 1 MBit/s
The HCPL05XX, and HCPL04XX optocouplers consist of
an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact 8-pin small outline package.
■ 15kV/µs minimum commone mode transient immunity
■
■
■
■
■
at VCM = 1500V (HCPL0453/0534)
Open collector output
Guaranteed performance over temperature: 0°C to
70°C
U.L. recognized (File # E90700)
VDE0884 recognized (file#136616)
– approval pending for HCPL0530/0531/0453
– ordering option V, e.g., HCPL0500V
BSI recognized (file# 8661, 8662)
– HCPL0452/0500/0501 only
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor. The
HCPL04XX devices do not have the base bonded out to
a lead for additional noise margin. The HCPL053X
devices have two channels per package for optimum
mounting density.
Truth Table
Applications
(positive Logic)
■ Line receivers
■ Pulse transformer replacement
■ Output interface to CMOS-LSTTL-TTL
■ Wide bandwidth analog coupling
LED
VO
ON
LOW
OFF
HIGH
Schematics
N/C 1
8 VCC
+ 1
8 VCC
V
F1
+ 2
V
7 VB*
_
2
7 V01
3
6 V02
F
_
3
6 VO
_
V
N/C 4
5 GND
HCPL0500, HCPL0501
*BASE NOT CONNECTED
F2
+ 4
5 GND
HCPL0530/HCPL0531/HCPL0534
FOR HCPL0452, HCPL0453
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
HCPL0XXX — High Speed Transistor Optocouplers
April 2009
Symbol
Parameter
Value
Units
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +85
°C
Reflow Temperature Profile (Refer to page 11)
EMITTER
IF (avg)
DC/Average Forward Input Current
25
mA
IF (pk)
Peak Forward Input Current (50% duty cycle, 1ms P.W.)
50
mA
Peak Transient Input Current - ([≤1µs P.W., 300 pps)
1.0
A
IF (trans)
VR
Reverse Input Voltage
5
V
PD
Input Power Dissipation
45
mW
Average Output Current (Pin 6)
8
mA
IO (pk)
Peak Output Current
16
mA
VEBR
Emitter-Base Reverse Voltage (HCPL0500/HCPL0501 only)
5
V
VCC
Supply Voltage
-0.5 to 30
V
VO
Output Voltage
-0.5 to 20
V
IB
Base Current (HCPL0500/HCPL0501 only)
5
mA
PD
Output power dissipation
100
mW
DETECTOR
IO (avg)
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
2
HCPL0XXX — High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Device
Min.
Typ.*
Max.
Unit
1.7
V
EMITTER
VF
Input Forward Voltage
IF = 16mA, TA = 25°C
All
1.45
IF = 16mA
1.8
Input Reverse Breakdown
Voltage
IR = 10µA
All
∆VF / ∆TA Temperature Coefficient of
Forward Voltage
IF = 16mA
All
-1.6
IF = 0mA, VO = VCC = 5.5V,
TA = 25°C
All
0.001
0.5
IF = 0mA, VO = VCC = 15V,
TA = 25°C
All
0.005
1
IF = 0 mA, VO = VCC = 15V
All
BVR
5.0
V
mV/°C
DETECTOR
IOH
ICCL
Logic High Output Current
Logic Low Supply Current
IF = 16mA, VO = Open,
VCC = 15V
50
HCPL0452/3/
0500/1
120
HCPL0530/1/4
ICCH
Logic High Supply Current
µA
200
µA
400
IF = 0mA, VO = Open,
VCC = 15V, TA = 25°C
All
0.01
1
IF = 0mA, VO = Open,
VCC = 15V
HCPL0452/3/
0500/1
2
HCPL0530/1/4
4
µA
Transfer Characteristics
Symbol
Parameter
Test Conditions
Device
Min.
Typ.* Max.
HCPL0500/0530
7
2.7
50
HCPL0452/3
19
27
50
Unit
COUPLED
CTR
Current Tranfer Ratio
(Note 1)
IF = 16mA, VO = 0.4V,
VCC = 4.5V, TA = 25°C
%
HCPL0501/0531
IF = 16mA, VO = 0.5V,
VCC = 4.5V
HCPL0500
5
30
HCPL0452/3
15
30
HCPL0501/0534
VOL
Logic Low Output Voltage
IF = 16mA, IO = 1.1mA,
VCC = 4.5V, TA = 25°C
HCPL0500
IF = 16mA, IO = 3mA,
VCC = 4.5V, TA = 25°C
HCPL0452/3
HCPL0501/0531/4
IF = 16mA, IO = 0.8mA,
VCC = 4.5V
IF = 16mA, IO = 2.4mA,
VCC = 4.5V
0.18
HCPL0530
0.4
V
0.5
0.25
0.4
HCPL0500
HCPL0530
0.13
0.5
HCPL0452/3
0.23
0.5
HCPL0501/0531/4
*All typicals at TA = 25°C
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
3
HCPL0XXX — High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70°C unless otherwise specified)
Switching Characteristics TVCC = 5V)
Symbol
TPHL
TPLH
|CMH|
|CML|
Parameter
Propagation
Delay Time to
Logic LOW
Propagation
Delay Time to
Logic HIGH
Common Mode
Transient
Immunity at
Logic HIGH
Common Mode
Transient
Immunity at
Logic LOW
Test Conditions
Device
Min.
Typ.* Max. Unit
TA = 25°C, RL = 4.1kΩ, IF = 16mA
(Note 2) (Fig. 9)
HCPL0500/0530
0.45
1.5
RL = 1.9kΩ, IF = 16mA, TA = 25°C
(Note 3) (Fig. 9)
HCPL0452/3
0.45
0.8
µs
HCPL0501/0531/4
RL = 4.1kΩ, IF = 16mA
(Note 2) (Fig. 9)
HCPL0500/0530
2.0
RL = 1.9kΩ, IF = 16mA
(Note 3) (Fig. 9)
HCPL0452/3
1.0
HCPL0501/0531/4
TA = 25°C, RL = 4.1kΩ, IF = 16mA
(Note 2) (Fig. 9)
HCPL0500/0530
0.5
1.5
RL = 1.9kΩ, IF = 16mA, TA = 25°C
(Note 3) (Fig. 9)
HCPL0452/3
0.3
0.8
µs
HCPL0501/0531/4
RL = 4.1kΩ, IF = 16mA
(Note 2) (Fig. 9)
HCPL0500/0530
2.0
RL = 1.9kΩ, IF = 16mA
(Note 3) (Fig. 9)
HCPL0452/3
1.0
HCPL0501/0531/4
IF = 0mA, VCM = 10VP-P, RL = 4.1kV,
TA = 25°C (Note 4) (Fig. 10)
HCPL0500
1,000
10,000
IF = 0mA, VCM = 10VP-P, RL = 1.9kΩ
TA = 25°C, (Note 4) (Fig. 10)
HCPL0452
1,000
10,000
HCPL0534
15,000
40,000
IF = 16mA, VCM = 1500VP-P,
RL = 1.9Ω, TA = 25°C
(Note 4) (Fig. 10)
HCPL0453
15,000
40,000
IF = 16mA, VCM = 10VP-P, RL = 4.1kΩ,
TA = 25°C (Note 4) (Fig. 10)
HCPL0500
1,000
10,000
IF = 16 mA, VCM = 10 VP-P,
RL = 1.9kΩ (Note 4) (Fig. 10)
HCPL0452
1,000
10,000
HCPL0534
15,000
40,000
HCPL0453
15,000
40,000
V/µs
HCPL0530
HCPL0501/31
V/µs
HCPL0530
HCPL0501/31
IF = 16mA, TA = 25°C,
VCM = 1500 VP-P, CL = 15pF)
(Note 4) (Fig. 10)
Isolation Characteristics
Symbol
Characteristics
Test Conditions
Min.
VISO
Input-Output Isolation Voltage
f = 60 Hz, t = 1.0 min., II-O ≤ 2µA
(Note 5, 6)
2500
RISO
Isolation Resistance
VI-O = 500V (Note 5)
1011
CISO
Isolation Capacitance
VI-O = 0 , f = 1.0MHz (Note 5)
Typ.*
Max .
Unit
VacRMS
0.2
pF
*All typicals at TA = 25°C
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
4
HCPL0XXX — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
1 Current Transfer Ratio is designed as a ratio of output collector current, IO, to the forward LED input current, IF, times
100%.
2. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36 mA and 6.1kΩ pull-up resistor.
3. The 1.9 kΩ load represents 1 TTL unit load of 1.6 mA and 5.6 kΩ pull-up resistor.
4. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V).
5. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
6. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
5
HCPL0XXX — High Speed Transistor Optocouplers
Notes
Fig. 2 Normalized CTR vs. Temperature
1.2
1.0
1.0
NORMALIZED CTR
NORMALIZED CTR
Fig. 1 Normalized CTR vs. Forward Current
1.2
0.8
0.6
0.4
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
IF = 16 mA
0.2
0.0
0.1
1
0.8
0.6
0.4
10
0.0
-60
100
-40
-20
IF - FORWARD CURRENT (mA)
20
40
60
80
100
80
100
Fig. 4 Logic High Output Current
vs. Temperature
1000
TA = 25°C
VCC = 5 V
14
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
16
IO - OUTPUT CURRENT (mA)
0
TA - TEMPERATURE (°C)
Fig. 3 Output Current vs. Output Voltage
IF = 40 mA
IF = 35 mA
12
IF = 30 mA
10
IF = 25 mA
8
IF = 20 mA
6
IF = 15 mA
4
IF = 10 mA
2
IF = 5 mA
0
2
4
6
8
10
12
14
16
18
IF = 0 mA
VCC = 5 V
VO = 5 V
100
10
1
0.1
-60
0
20
-40
-20
20
40
60
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 Propagation Delay vs. Temperature
800
10000
700
RL = 4.1 K (TPLH)
TP - PROPAGATION DELAY (ns)
600
0
TA - TEMPERATURE (°C)
VO - OUTPUT VOLTAGE (V)
Tp - PROPAGATION DELAY (ns)
IF = 16mA
VCC = 5 V
VO = 0.4 V
Normalized to:
TA = 25°C
0.2
RL = 4.1 K (TPLH)
500
400
300
200
RL = 1.9 K (TPHL)
IF = 16 mA
VCC = 5 V
RL = 1.9 K (TPLH)
100
IF - 16 mA (TPHL)
IF - 10 mA (TPHL)
1000
IF - 16 mA (TPLH)
IF - 10 mA (TPLH)
0
-60
-40
-20
0
20
40
60
80
100
100
1
TA - TEMPERATURE (°C)
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
VCC = 5 V
TA = 25°C
10
RL = LOAD RESISTANCE (kΩ)
www.fairchildsemi.com
6
HCPL0XXX — High Speed Transistor Optocouplers
Typical Performance Curves
Noise
Shield
8
+
2
7
VF
-
3
6
4
5
VCC
VB
Pulse
Generator
tr = 5ns
Z O = 50
+5 V
10% DUTY CYCLE
I/f < 100µS
RL
VO
IF
MONITOR
0.1 µF
1
Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501
8
VCC
+5 V
RL
VF1
-
7
2
V01
VO
C L = 1.5 µF
3
6
4
5
VF2
+
Rm
C L = 1.5 µF
GND
Noise
Shield
+
-
VO
I F Monitor
Rm
IF
V02
0.1 µF
GND
Test Circuit for HCPL0530, HCPL0531 and HCPL0534
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
Noise
Shield
8
+
2
A
B
7
VCC
+
+5 V
IF
VB
VF1
-
RL
Noise
Shield
1
8
VCC
+5 V
RL
2
7
3
6
4
5
V01
VO
A
VF
-
3
6
VO
B
VO
VFF
0.1 µF
VFF
4
5
+
GND
VF2
+
-
V02
0.1 µF
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501
Test Circuit for HCPL0530, HCPL0531 and HCPL0534
VCM 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
7
HCPL0XXX — High Speed Transistor Optocouplers
Pulse
Generator I
F
tr = 5ns
Z O = 50
10% D.C.
I/f < 100µs
1
8-pin SOIC Surface Mount
8
0.164 (4.16)
0.144 (3.66)
SEATING PLANE
1
0.202 (5.13)
0.182 (4.63)
0.010 (0.25)
0.006 (0.16)
0.143 (3.63)
0.123 (3.13)
0.021 (0.53)
0.011 (0.28)
0.008 (0.20)
0.003 (0.08)
0.244 (6.19)
0.224 (5.69)
0.050 (1.27) Typ.
Lead Coplanarity: 0.004 (0.10) MAX
Recommended Pad Layout
0.024 (0.61)
0.060 (1.52)
0.275 (6.99)
0.155 (3.94)
0.050 (1.27)
Dimensions in inches (mm).
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
8
HCPL0XXX — High Speed Transistor Optocouplers
Package Dimensions
Option
Order Entry Identifier
V
V
R2
R2
R2V
R2V
Description
VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534)
Tape and reel (2500 units per reel)
VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534),
Tape and reel (2500 units per reel)
Marking Infomation
1
500
V
X YY S
3
2
6
5
4
Definitions
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered
with VDE option – See order entry table)
4
One digit year code, e.g., ‘3’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
www.fairchildsemi.com
9
HCPL0XXX — High Speed Transistor Optocouplers
Ordering Information
HCPL0XXX — High Speed Transistor Optocouplers
Carrier Tape Specifications
8.0 ± 0.10
3.50 ± 0.20
2.0 ± 0.05
0.30 MAX
Ø1.5 MIN
4.0 ± 0.10
1.75 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
8.3 ± 0.10
5.20 ± 0.20
0.1 MAX
Ø1.5 ± 0.1/-0
6.40 ± 0.20
User Direction of Feed
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
10
HCPL0XXX — High Speed Transistor Optocouplers
Reflow Profile
Temperature (°C)
TP
260
240
TL
220
200
180
160
140
120
100
80
60
40
20
0
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
tP
Tsmax
tL
Preheat Area
Tsmin
ts
120
240
360
Time 25°C to Peak
Time (seconds)
Profile Freature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (tS) from (Tsmin to Tsmax)
60–120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60–150 seconds
Peak Body Package Temperature
260°C +0°C / –5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max.
Time 25°C to Peak Temperature
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
8 minutes max.
www.fairchildsemi.com
11
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™*
™*
®
®
Fairchild
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
®
FAST
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
®
*
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40
©2003 Fairchild Semiconductor Corporation
HCPL0XXX Rev. 1.0.4
www.fairchildsemi.com
12
HCPL0XXX — High Speed Transistor Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.