NAIS ARX1103 Small micro wave relay Datasheet

RX
RX-RELAYS
SMALL MICRO WAVE RELAY
• Insertion loss
0
12.4
.488
20.5
.807
• V.S.W.R./ Return loss: 1.2dB or less/
20.8dB or more
2. High sensitivity
• Nominal operating power: 200 mW
3. Small size
• Size: 20.5(L) × 12.4(W) × 9.4(H) mm
.807(L) × .488(W) × .370(H) inch
COM-NC
Insertion loss, dB
9.4
.370
mm inch
1. Excellent high frequency characteristics (~2.5GHz, Impedance 50Ω)
• Insertion loss: 0.2 dB or less
• Isolation: 60 dB or more
0.1
0.2
COM-NO
0.3
0.4
0.5
300kHz
1.5GHz
*Also available for unit support (contact us
for more details).
2.5GHz3GHz
Frequency
SPECIFICATIONS
Contact
Characteristics
Gold
Contact material
Contact rating
10W (2.5 GHz, Impedance
50 Ω, V.S.W.R. 1.2)
10mA 24V DC(resistive load)
Expected
life (min.
operations)
Release time (without diode) [Reset time]*3
Max. 6ms (Approx. 3ms)
[Max. 10ms (Approx. 5ms)]
0.5 A DC
Temperature rise (at 20°C)*4
Min. 60 dB
Shock resistance
Max. 0.2 dB
Max. 1.2 (Min. 20.8dB)
Max. 20W (at 40°C,
V.S.W.R. 1.2,Average)
Mechanical (at 180 cpm)
5×106
10mA 24 V DC
(resistive load)
3×105
Electrical 10W 2.5 GHz,
Impedance 50Ω
500 Vrms
30 V DC
Max. switching voltage
High frequency Insertion loss
characteristics
V.S.W.R.(Return loss)
(~2.5GHz,
Impedance 50Ω)
Input power
1,000 Vrms
Max. 10ms (Approx. 6ms)
[Max. 10ms (Approx. 5ms)]
Max. 20W(at 40°C,
V.S.W.R. 1.2, Average)
Max. switching current
500 Vrms
Initial
Between contact and coil
breakdown
2
Between contact and
voltage*
earth terminal
Operate time [Set time]*3 (at 20°C)
Contact carrying power
Isolation
Min. 100 MΩ (at 500 V DC)
Between open contacts
Max. 100 mΩ
Initial contact resistance
Rating
Initial insulation resistance*1
1 Form C
Arrangement
Max. 60°C
Functional*5
Min. 200 m/s2 {20 G}
Destructive*6
Min. 1,000 m/s2 {100 G}
Functional*7
Vibration
resistance
Destructive
Conditions for operation,
transport and storage*8
10 to 55 Hz
at double amplitude of 3 mm
10 to 55 Hz
at double amplitude of 5 mm
Ambient temp.
(Not freezing and condensing
Humidity
at low temperature)
105
Remarks
Nominal operating power
Single side stable
200 mW
1 coil latching
200 mW
2 coil latching
400 mW
TYPICAL APPLICATIONS
• Cellular phone base station (W-CDMA,
FPLMTS, IMT-2000, PCS, DCS)
• Cellular phone-related measurement
devices (SP3T/SP4T switches, etc)
• Wireless LAN
• Wireless Local Loop
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as “Initial breakdown voltage” section.
*2 Detection current: 10mA
*3 Nominal operating voltage applied to the coil, excluding contact bounce time.
*4 By resistive method, nominal voltage applied to the coil: Contact carrying power:
20W, at 2.5GHz, Impedance 50Ω, V.S.W.R.&1.2
*5 Half-wave pulse of sine wave: 11ms, detection time: 10µs.
6
* Half-wave pulse of sine wave: 6ms
*7 Detection time: 10µs
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
ORDERING INFORMATION
Ex.
A
Product name
RX
RX
Contact arrangement
1: 1 Form C
1
0
Operating function
0: Single side stable
1: 1 coil latching
2: 2 coil latching
Note: Standard packing; Carton: 50 pcs. Case 500 pcs.
90
5 to 85% R.H.
Approx. 5 g .18 oz
Unit weight
Coil (at 20°C, 68°F)
–40°C to 60°C
–40°F to 140°F
12
Coil voltage, V DC
03: 3
4H: 4.5
06: 6
09: 9
12: 12
24: 24
RX
TYPES ANE COIL DATA (at 20°C 68°F)
• Single side stable type
Part No.
ARX1003
ARX104H
ARX1006
ARX1009
ARX1012
ARX1024
Nominal
voltage,
V DC
3
4.5
6
9
12
24
Pick-up
voltage, V DC
(max.)(initial)
2.25
3.375
4.5
6.75
9
18
Drop-out
voltage, V DC
(min.)(initial)
0.3
0.45
0.6
0.9
1.2
2.4
Set
voltage, V DC
(max.)(initial)
2.25
3.375
4.5
6.75
9
18
Reset
voltage, V DC
(max.)(initial)
2.25
3.375
4.5
6.75
9
18
Set
voltage, V DC
(max.)(initial)
2.25
3.375
4.5
6.75
9
18
Reset
voltage, V DC
(max.)(initial)
2.25
3.375
4.5
6.75
9
18
Coil resistance,
Ω (±10%)
45
101
180
405
720
2,880
Nominal
Nominal
operating current, operating power,
mA (±10%)
mW
66.7
200
44.4
200
33.3
200
22.2
200
200
16.7
8.3
200
Max. allowable
voltage, V DC
3.3
4.95
6.6
9.9
13.2
26.4
• 1 coil latching type
Part No.
ARX1103
ARX114H
ARX1106
ARX1109
ARX1112
ARX1124
Nominal
voltage,
V DC
3
4.5
6
9
12
24
Coil resistance,
Ω (±10%)
45
101
180
405
720
2,880
Nominal
Nominal
operating current, operating power,
mA (±10%)
mW
200
66.7
200
44.4
200
33.3
200
22.2
200
16.7
200
8.3
Max. allowable
voltage, V DC
3.3
4.95
6.6
9.9
13.2
26.4
• 2 coil latching type
Part No.
ARX1203
ARX124H
ARX1206
ARX1209
ARX1212
ARX1224
Nominal
voltage,
V DC
3
4.5
6
9
12
24
Coil resistance,
Ω (±10%)
22.5
50.6
90
202.5
360
1,440
Nominal
Nominal
operating current, operating power,
mA (±10%)
mW
400
133.3
400
88.9
400
66.7
400
44.4
400
33.3
400
16.7
Max. allowable
voltage, V DC
3.3
4.95
6.6
9.9
13.2
26.4
DIMENSIONS
mm inch
PC board pattern (Bottom view)
20.5
.807
12.4
.488
0.9 dia hole
.035 dia hole
7.62
.300
0.2
.008
2.63
.104
(2 coil latching type only)
2.54
.100
9.2
.362
2.54
.100
3.0
.118
(2.04)
(.080)
7.62
.300
R
(2.74)
(.108)
0.90
.035
0.
45
2-0.6×0.3
2-.024×.012
Tolerance: ±0.1 ±.004
General tolerance: ±0.3 ±.012
Solder to the PC board earth.
Schematic (Bottom view)
7-0.40 to 0.45 dia.
7-.016 to .018 dia.
Single side stable
1
7
14 13 12 11 10 9
NC
COM
8
NO
(Deenergized condition)
1 coil latching
1
7
14 13 12 11 10 9
RESET
2 coil latching
COM
8
SET
(Reset condition)
6
7
14 13 12 11 10 9
8
1
RESET
COM
SET
(Reset condition)
91
RX
REFERENCE DATA
1. High frequency characteristics
Sample: ARX1012
Measuring method: Measured with HP network analyzer (HP8753C).
The details for the high freqency characteristics and the measurement
procedures and conditions are listed in the RX relay test report.
• Insertion loss
• Isolation
0
• V.S.W.R. (Return loss)
0
0
20
10
5.0
COM-NO
40
COM-NC
Return loss, dB
Isolation, dB
0.2
2.0
1.5
COM-NO
20
1.2
1.1
0.3
60
30
0.4
80
40
V.S.W.R.
Insertion loss, dB
COM-NC
0.1
COM-NC
0.5
300kHz
1.5GHz
2.5GHz3GHz
Frequency
100
300kHz
COM-NO
50
1.5GHz
Frequency
2.5GHz 3GHz
300kHz
1.5GHz
2.5GHz 3GHz
Frequency
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be rectangular. lf it includes ripple, the ripple factor
should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 30 ms to set/reset the latching type
relay.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or malfunction.
3. External magnetic field
Since RX relays are highly sensitive polarized relays, their characteristics will be
affected by a strong external magnetic
field. Avoid using the relay under that
condition.
4. Cleaning
For automatic cleaning, the boiling method is recommended. Avoid ultrasonic
cleaning which subjects the relays to high
frequency vibrations, which may cause
the contacts to stick.
lt is recommended that a fluorinated hydrocarbon or other alcoholic solvents be
used.
5. Soldering
The soldering shall be performed under
following condition.
Max. 260°C 500°F 10s
Max. 350°C 662°F 3s
In addition, when soldering the case to
the PC board, the plating may swell
depending on the soldering conditions.
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
92
9/1/2000
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
Similar pages